APC Smart UPS 100 V دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

®

Smart-UPS
Addendum
UPS Rack-Mount Installation

English


990-3567-001 03/2009

ملخص المحتوى في الصفحة رقم 2

ملخص المحتوى في الصفحة رقم 3

Introduction The APC Uninterruptible Power Supply (UPS) is designed to prevent utility blackouts, brownouts, sags, and surges from reaching your electronic equipment. The uninterruptible power supply (UPS) filters small utility line fluctuations and isolates your electronic equipment from large disturbances by internally disconnecting from the utility line. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully dischar

ملخص المحتوى في الصفحة رقم 4

INSTALLATION Install the Rails in the Rack The UPS fits in a standard 19 inch, (46.5 cm) rack. 2

ملخص المحتوى في الصفحة رقم 5

Mount the UPS in a Rack The UPS is heavy. To lighten it, you must remove the battery before mounting the unit in the rack, Steps and . Be careful-the battery is heavy. Ensure that both cleats are properly seated in the rail. Check to ensure the rack will not tip after installing the UPS into the rack. 3

ملخص المحتوى في الصفحة رقم 6

Install and Connect the Battery and Attach the Front Bezel 4