AudioSource AS6s دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

AS6s
6.5” 2-Way In-Wall Speakers
Congratulations on your purchase of the
AudioSource AS6s In-Wall Speaker System. This
product is designed to reproduce the audio portion
of your home entertainment environment with
accuracy and detail that will satisfy the most
discriminating listener.
Please read this Installation Manual to ensure the
proper installation and performance of your AS6s
speakers.
Preparing for your Installation
Gather the necessary tools for you installation.
You will need t

ملخص المحتوى في الصفحة رقم 2

It is now time to connect the speaker wire to the AS6s. After selection of the mounting location, mark the hole to Your speaker wire is usually coded to identify each be cut out. A template is provided in the speaker box. conductor as either positive or negative. This can be by Locate and level the template, then mark with pencil on color coding, or one conductor may have a printed the wall surface. If you are unsure whether there are marking or at least a rib along one edge that you will

ملخص المحتوى في الصفحة رقم 3

Tighten all six of the mounting screws in the same Recommended Speaker Wire Gauges manner until the speaker is properly aligned and held tight to the wall surface. Caution: Do not over tighten! The resistance of the speaker wire in your installation can cause your speakers to perform at less than their Painting the Speaker optimum quality level. Excess resistance caused by using an undersized speaker wire can result in loss of Two paint shields are included in each AS6s speaker detail and

ملخص المحتوى في الصفحة رقم 4

AS6s Specifications Woofer 6.5” Poly Cone with Butyl Rubber Surround Tweeter Pivoting 25mm Ferro-Fluid Cooled Tweeter Frequency Response 50Hz to 20kHz Impedance 8 ohm Sensitivity 87dB Power Capacity 200 Watts Peak Outer Dimension 8.5” x 12“ (215.9mm x 304.8mm) Cut Out Dimension 7.3” x 10.8“ (185.7mm x 274.6mm) Mounting depth 3.4” (85.75mm) Two Year Limited Warranty AudioSource a division of Rodin warrants this product against defects in materials and workmanship for a limited period of time. Fo