Peavey SP 3X دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PEA VEY ELECTRONICS
SPECS
™
SP 3X
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
54 Hz to 17 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
47 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
Passive Mid/High Frequency Section:
150 W continuous
300 W program
600 W peak
Sound pressure level, 1 Watt,
Transducer complement: Time offset:
1 meter in anec

ملخص المحتوى في الصفحة رقم 2

SA-1 stand mount adapter built-in, and cooling, coupled to a CH 3 constant crossover with the selected drivers results four large rubber feet on bottom for directivity horn. This horn has a smooth, in a smooth frequency response from floor use. even response with good high frequency 54 Hz to 17 kHz. A crossover EQ switch is dispersion. The RX22 driver features the provided to tailor the response in the mid- Dimensions (H x W x D): Radialinear Planar Phase Correction range and highs, providing a

ملخص المحتوى في الصفحة رقم 3

built-in, and four large rubber feet on vertical plane. The outside dimensions Power Handling bottom for floor use. shall be 33.63 inches high by 21.38 There are many different approaches inches wide by 22.88 inches deep. The to power handling ratings. Peavey rates Architectural and Engineering weight shall be 92 pounds. The this loudspeaker system’s power handling Specifications loudspeaker system shall be a Peavey using a full-range form of the AES The loudspeaker system shall have an model

ملخص المحتوى في الصفحة رقم 4

Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 5/01 80304851