Friedrich WALLMASTER SUBBASE WY دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
SUBBASE FOR WS, WE & WY MODELS
These instructions are provided for installation of the WallMaster Subbase. This accessory subbase can be used
whenever a WallMaster air conditioner is installed in a wall from 2" to 12" thick, or when additional support or leveling
of the unit is desired.
NOTE: The subbase should be assembled to the WSC sleeve before sleeve is installed in the wall, however it may
be used with existing installations.
ELECTRICAL DATA
STEP 1. A fi eld sup

ملخص المحتوى في الصفحة رقم 2

STEP 3. Attach subbase mounting brackets to holes in sleeve from Step 1 with four 1/4" phillips screws. STEP 4. Determine correct distance from inside wall to front of subbase. Slide fi ller plates to correct distance and tighten screws. NOTE: For shorter distances, back of fi ller plate may be cut to size. STEP 5. Insert wall sleeve and subbase assembly into wall opening as described in instructions provided with wall sleeve. STEP 6. Level subbase fl ush with fl oor by adjusting leveling screw