ملخص المحتوى في الصفحة رقم 1
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 1
Color Video Camera
Instruction Manual
Models : LVC-SX703PC/OC/MC
LVC-SX703PB/OB/MB
Before installing, operating or adjusting this
product, please read this instruction booklet
carefully and completely.
ملخص المحتوى في الصفحة رقم 2
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 2 This equipment generates, uses, and can radiate radio frequency CAUTION energy and, if not installed and used in accordance with the instruc- tion manual, may cause harmful interference to radio communica- RISK OF ELECTRIC SHOCK tions. Operation of this equipment in a residential area is likely to DO NOT OPEN cause harmful interference in which case the user will be required CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK to correct the in
ملخص المحتوى في الصفحة رقم 3
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 3 Important Safety Instructions 1. Read these instructions. - All these safety and 7. Do not block any ventilation openings. Install operating instructions should be read before the in accordance with the manufacturer’s instruc- product is operated. tions. - Slots and openings in the cabinet are provided for ventilation, to ensure reliable oper- 2. Keep these instructions. - The safety, operat- ation of the product, and to protect it from i
ملخص المحتوى في الصفحة رقم 4
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 4 Important Safety Instructions 9. Do not defeat the safety purpose of the polar- 12. Use only the cart, stand, tripod, bracket, or ized or grounding-type plug. A polarized plug table specified by the manufacturer, or sold has two blades with one wider than the with apparatus. When a cart is used, use other. A grounding type plug has two blades caution when moving the cart/ apparatus and a third grounding prong. The wide blade combination t
ملخص المحتوى في الصفحة رقم 5
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 5 Contents and Features Privacy Masking Setting . . . . . . . . . . . . . . . .31 Contents Special Menu Settings . . . . . . . . . . . . . . .32-37 Important Safety Instructions . . . . . . . . . . . .3-4 RS-485 Protocol . . . . . . . . . . . . . . . . . . . . .38 Contents and Features . . . . . . . . . . . . . . . . . .5 Specifications . . . . . . . . . . . . . . . . . . . . .39-40 Features Chart . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 6
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 6 Features Chart This page shows the differences between the models. Models DAY/NIGHT WDR DSS Power Source LVC-SX703PC Yes Yes Yes AC24V (50Hz) / DC12V LVC-SX703OC Yes No Yes AC24V (50Hz) / DC12V LVC-SX703MC Yes No No AC24V(50Hz) / DC12V LVC-SX703PB Yes Yes Yes AC230V (50Hz) LVC-SX703OB Yes No Yes AC230V (50Hz) LVC-SX703MB Yes No No AC230V (50Hz) Models LVC-SX703PC/LVC-SX703PB are used for the description, operation, and details pro- vided
ملخص المحتوى في الصفحة رقم 7
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 7 Cautions for Safe Operation • Extremely hot or cold places (operating tempera- Power Supply ture -10 °C - 50 °C, however, we recommend This camera must always be operated a AC 24V or that the unit be used within a temperature range DC 12V Certified/Listed, class 2 power supply only. of 0 °C - 45 °C) Note: Be careful of AC frequency when the camera • Damp or dust place is operated with Line lock mode. • Places exposed to rain • Places subj
ملخص المحتوى في الصفحة رقم 8
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 8 Part Names and Functions 1. Lens mount cap 12 3 4 The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately) . 2. Flange-back adjustment dial 3. Flange-back lock screw 4. Camera installation bracket The bracket can be fixed at the top or bottom of the camera. (page 16) 8
ملخص المحتوى في الصفحة رقم 9
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 9 Part Names and Functions 5. Power input terminal 5(a) 6 7 8 a) AC 24 V or DC 12 V input terminal b) AC 230 V input terminal 6. Video output connector (BNC type) Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 7. Power indicator Comes on when the power to the camera is on. 8. External Device Connectors RS-485 Connector 5(b) 6 7 8 Connect to an external controller of RS-485 format. Alarm Output Termi
ملخص المحتوى في الصفحة رقم 10
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 10 Part Names and Functions 9. Buttons for menu 910 11 To set items on the MEMU, use the these but- tons on the side panel. (page 17) 10. ALC Lens Setting Switch DC: When you attach an Auto Iris lens requir- ing the DC control signal, please put this switch in the DC position. ELC: When you attach a manual or fixed lens, please put this switch in the ELC position. VIDEO: When you attach an Auto Iris lens requiring the video control signal,
ملخص المحتوى في الصفحة رقم 11
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 11 Connections Basic connection 3 The peripheral devices (VCR, monitor, lens, etc.), 2 AC adaptor and cables are not supplied. 1. Connecting the monitor Make the video signal connection between the camera and the monitor or time lapse VCR. 2. Use a commercially available AC 24 V adaptor. Connect an AC 24 V power source to the AC 24V input terminal on the back of the camera. 1 3. Insert the plug of this power cord into a wall outlet. The PO
ملخص المحتوى في الصفحة رقم 12
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 12 Mounting the Lens 1. Remove the lens mount cap from the camera. 2. Install the auto-iris lens. 2-1. CS mount type lens Carefully align the lens mount with the camera 1 opening, then turn the lens slowly to install it. 2-2. C mount type lens To allow for flange- back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully align the lens mount with the 2-2 camera opening and turn the lens slowly to install it. 3.
ملخص المحتوى في الصفحة رقم 13
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 13 Concerning Auto-Iris Lenses ELC type auto-iris lens Use a manual or fixed iris lens (Set the ALC Lens Setting Switch to the ELC position.) If using a VIDEO type auto-iris lens DC type auto-iris lens • Set the ALC and LEVEL controls on the lens to A lens without driver circuit that operates only on adjust the iris. Normally the ALC volume should a DC power source. In general, this type of lens is be turned all the way to Av (Average). ref
ملخص المحتوى في الصفحة رقم 14
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 14 External Device Connections Contact Ratings • Maximum load current is ±130mA. RS-485 (TR+) • Do not connect any system or ALARM RS-485 (TR-) device that has over 40 Vp-p ALARM (OUT) (DC 30 V) bias voltage on the COM ALARM (COM) contact terminal. Equivalent Diagram MULTI (INPUT) Notes: MULTI (GND) Use a relay unit if the voltage or current of the connected device exceeds the ratings. RS-485 Connection Connect to an external controller of
ملخص المحتوى في الصفحة رقم 15
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 15 Flange-back Adjustment The adjustment is required only when a lens with- 1 Loosen the flange-back fixing screw on the out focus-adjusting mechanism is mounted, or flange-back adjusting ring. when a lens with adjusting mechanism is mounted 2. Turn the flange-back adjusting ring to obtain a and focus that is more accurate is needed. focused point while watching the monitor screen. flange-back 3. Tighten the flange-back fixing screw on the
ملخص المحتوى في الصفحة رقم 16
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 16 Installation of Camera The bracket can be installed to either the top of the camera as desired. When changing the position of the camera mounting bracket, you should always reuse the screws that have been removed. Note: If using a camera mounting bracket, select a loca- tion that is strong enough to bear the full weight of the camera and the mounting bracket for long periods, and install the camera and mounting bracket securely. 16
ملخص المحتوى في الصفحة رقم 17
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 17 Menu Operation This camera utilizes an on-screen user MENU. To set Right button: Moves the cursor to the right. items on the menu, use the following buttons on Use this button to select or adjust the parame- the side panel. ters of the selected item. The parameter changes each time this button is pressed. Up Button Left button: Moves the cursor to the left. Use Set Button this button to select or adjust the parameters of the selected ite
ملخص المحتوى في الصفحة رقم 18
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 18 Menu Operation To Open and Exit the Menu screen Press and hold down for 2 seconds or more. The MENU screen appears on the monitor as shown below. Check the current settings on the menu. Press and hold down for 2 seconds or more to exit the menu screen. MENU LANGUAGE ENGLISH CAMERA ID OFF EXPOSURE WHITE BAL PUSH AUTO DAY/NIGHT AUTO MOTION DET OFF PRIVACY MASK SPECIAL INITIAL SET OFF EXIT 18
ملخص المحتوى في الصفحة رقم 19
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 19 Language and Camera Identification Settings Language Setting MENU LANGUAGE ENGLISH Select a language for the Setup menu and on-screen display. CAMERA ID OFF 1. Select [LANGUAGE] option on the [MENU] screen. EXPOSURE WHITE BAL PUSH AUTO 2. Press left or right button to select a language. DAY/NIGHT AUTO MOTION DET OFF PRIVACY MASK SPECIAL INITIAL SET OFF EXIT Camera Identification Setting MENU You can use the camera identification (CAMERA
ملخص المحتوى في الصفحة رقم 20
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 20 Exposure Settings You can set the exposure options using the EXPOSURE menu. MENU LANGUAGE ENGLISH 1. Select [EXPOSURE] option on the [MENU] screen. CAMERA ID OFF EXPOSURE 2. Press , , or button and the EXPOSURE menu appears. WHITE BAL PUSH AUTO DAY/NIGHT AUTO 3. To reset the [EXPOSURE] settings to factory setting, select [INI- MOTION DET OFF TIAL SET] option then press on the [EXPOSURE] menu. PRIVACY MASK SPECIAL 4. To return to the prev
