ملخص المحتوى في الصفحة رقم 1
COMPACT VHS CAMCORDER
ENGLISH
GR-AXM99UM
Compact VHS
INSTRUCTIONS
LYT0111-001A EN
ملخص المحتوى في الصفحة رقم 2
2 EN Dear Customer, Warning on lithium battery Thank you for purchasing the JVC Compact The battery used in this device may present a VHS camcorder. Before use, please read the fire or chemical burn hazard if mistreated. Do safety information and precautions contained not recharge, disassemble, heat above 100°C in the following pages to ensure safe use of or incinerate. your new camcorder. Replace battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another battery
ملخص المحتوى في الصفحة رقم 3
EN 3 IMPORTANT PRODUCT ANTENNA INSTALLATION INSTRUCTIONS SAFETY INSTRUCTIONS 1. Outdoor Antenna Grounding Electrical energy can perform many useful func- If an outside antenna or cable system is connected tions. But improper use can result in potential to the product, be sure the antenna or cable system electrical shock or fire hazards. This product has is grounded so as to provide some protection been engineered and manufactured to assure your against voltage surges and built-up static charges.
ملخص المحتوى في الصفحة رقم 4
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits • Do not place this product on an unstable cart, a marked change in performance and you are stand, tripod, bracket or table. It may fall, causing unable to restore normal operation by following the serious injury to a child or adult, and serious detailed procedure in its operating instructions, do damage to the product. not attempt to service it yourself as opening or •
ملخص المحتوى في الصفحة رقم 5
MAJOR FEATURES EN 5 REMEMBER Program Manager II (Z pg. 28 – 41) Program AE with Special Effects, The Logical Choice Fade/Wipe, Wide, Super LoLux, Instant Titles, Menu Adjustment (Focus, Exposure Control and so on.) The only compact video Digital Still Camera Built-in cassettes that can be (PC communication capable) used with your VHS VCR* (Z pg. 48 – 63) Program AE with Special Integrated Auto Light Effects (Z pg. 28, 29) (Z pg. 25) n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter Pi
ملخص المحتوى في الصفحة رقم 6
QUICK OPERATION GUIDE (VIDEO) 6 EN SUPPLY POWER INSERTING A VIDEO CASSETTE Hook on. 1 PUSH EJECT 2 2 Push in. 3 4 BATT. RELEASE Using the battery pack 1 Open 1 Hook-on the battery pack’s top end to the camcorder. (Charging procedure, Z pg. 10) 1 Open the LCD monitor to an angle of over 2 Push in the battery pack until it locks into 45 degrees. place. 2 Press EJECT to open the cassette holder. 3 Insert a video cassette. To remove the battery pack 4 Press PUSH to close the cassette holder. Slide
ملخص المحتوى في الصفحة رقم 7
QUICK OPERATION GUIDE (D.S.C.) EN 7 SUPPLY POWER SHOOTING Hook on. 4 SNAPSHOT Button 1 1 LENS COVER 2 Push in. Open/Close Switch 3 Power Switch BATT. RELEASE Set to “CAMERA” Using the battery pack 1 Hook-on the battery pack’s top end to the camcorder. (Charging procedure, Z pg. 10) 2 Push in the battery pack until it locks into place. To remove the battery pack Slide BATT. RELEASE and pull out the battery pack. 2 System Select Switch Set to “D.S.C.” 1 Slide the LENS COVER Open/Close Switch PLAY
ملخص المحتوى في الصفحة رقم 8
CONTENTS 8 EN GETTING STARTED 10 Power ..................................................................................... 10 Clock (Lithium) Battery Insertion/Removal .......................................... 12 Date/Time Setting....................................................................... 13 Grip Adjustment ......................................................................... 14 Viewfinder Adjustment ................................................................. 14 Shoulder
ملخص المحتوى في الصفحة رقم 9
EN 9 USER MAINTENANCE 73 INDEX 74 LCD monitor/Viewfinder Indications.................................................. 75 Controls ................................................................................... 76 Connectors ................................................................................ 76 Indicators ................................................................................. 76 Other Parts ...............................................................................
ملخص المحتوى في الصفحة رقم 10
GETTING STARTED 10 EN Marks Power This camcorder’s 3-way power supply system lets you To AC outlet choose the most appropriate source of power. CHG. (charge) indicator NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER Connect the charger’s AC power cord to a wall REFRESH indicator 1 outlet. ATTACH BATTERY PACK REFRESH Align the marks and sl
ملخص المحتوى في الصفحة رقم 11
EN 11 CHARGE MARKER Charge marker (OPTIONAL BATTERY ONLY) A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged. •The battery pack BN-V18U does not have a charge marker. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs
ملخص المحتوى في الصفحة رقم 12
GETTING STARTED (cont.) 12 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensure that the pl
ملخص المحتوى في الصفحة رقم 13
EN 13 Date/Time Setting ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar 2 to “DATE/TIME”, then press it. The DATE/TIME Select Dial Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial MENU to move highlight bar to “EXIT” and press it, then Jog Dial go to step 6.
ملخص المحتوى في الصفحة رقم 14
GETTING STARTED (cont.) 14 EN Power Zoom Button Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop Button and Power Zoom Button. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment POSITION VIEWFINDER 3 Adjust the viewfinder manually for best viewability 1 (see illustration at left). SELECT MODE
ملخص المحتوى في الصفحة رقم 15
EN 15 Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 1 through the top of the eyelet 1, then fold it back 2 and thread it through the buckle 2. Repeat the 1 procedure to attach the other end of the strap to the 1 other eyelet 3, making sure the strap isn’t twisted. 3 ADJUST LENGTH Adjust as shown in the illustration at left 1. 2 Tripod Mounting ALIGN AND TIGHTEN Align the screw and camera direction stud on the 1 tripod with the camera’s mounting socke
ملخص المحتوى في الصفحة رقم 16
VIDEO GETTING STARTED 16 EN Recording Mode Setting SP/EP Recording Mode Button Set depending on your preference. SET RECORDING MODE First set the System Select Switch to “VIDEO”, then 1 set the Power Switch to “CAMERA”. Press SP/EP Button for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times as the recording time. Select Dial NOTE: MENU Jog Dial If the recording mode
ملخص المحتوى في الصفحة رقم 17
EN 17 Loading/Unloading A Cassette OPEN LCD MONITOR 2 2 Open the LCD monitor to an angle of over 45 4 4 3 3 1 degrees. OPEN CASSETTE HOLDER Press EJECT until the holder opens. Do not use force 1 5 2 to open. INSERT/REMOVE CASSETTE Make sure the label is facing outward. 3 CLOSE CASSETTE HOLDER Press PUSH and make sure the holder is closed and 4 locked. Turn to take up slack. CLOSE LCD MONITOR First make sure the holder is closed. Then close the Erase Protection Gear 5 LCD monitor. NOTES: c Closin
ملخص المحتوى في الصفحة رقم 18
VIDEO RECORDING Basic Recording 18 EN LENS COVER Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 10) c Recording Mode/Tape Length Setting (Z pg. 16) c Grip Adjustment (Z pg. 14) LOAD A CASSETTE Power First open the LCD monitor to an angle of over 45 Indicator 1 degrees. Press EJECT to open the cassette holder, then insert Power the cassette with the label facing out. Press PUSH to Switch ensure the holder is closed and
ملخص المحتوى في الصفحة رقم 19
EN 19 Tape Remaining Time Indicator STOP RECORDING 25MIN MIN Press the Recording Start/Stop Button again to stop (Now calculating) 4 recording. •The camcorder re-enters the Record-Standby 120MIN mode. 119MIN NOTES: c When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the 3MIN LCD monitor switches on and the viewfinder switches off automatically to save power. 2MIN c A cassette holder can’t be opened unless a power supply (Blinking) is attached
ملخص المحتوى في الصفحة رقم 20
VIDEO RECORDING Basic Recording (cont.) 20 EN Shooting while Watching the LCD Monitor 90° 180° Before the following steps, perform step 1 (Z pg. 18). ENTER RECORD–STANDBY MODE Make sure the LCD monitor is fully open. Slide the 2 LENS COVER Open/Close Switch to open the lens cover. Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA”. •The power indicator lights and the camcorder LENS COVER Switch enters the Record–Standby mode. •The scene you’re aimed at appears in t
