ملخص المحتوى في الصفحة رقم 1
DIGITAL VIDEO CAMERA
ENGLISH
GR-DVX88
Please visit our CyberCam Homepage on
the World Wide Web and answer our
Consumer Survey (in English only):
http://www.jvc-victor.co.jp/index-e.html
INSTRUCTIONS
LYT0002-0X9A EN
ملخص المحتوى في الصفحة رقم 2
2 EN Dear Customer, Warning on lithium cell battery The battery used in this device may present a Thank you for purchasing this Digital Video fire or chemical burn hazard if mistreated. Do Camera. Before use, please read the safety not recharge, disassemble, heat above 100°C information and precautions contained in the (212°F) or incinerate. following pages to ensure safe use of this Replace battery with Panasonic (Matsushita product. Electronic), Sanyo or Maxell CR2025; use of another battery m
ملخص المحتوى في الصفحة رقم 3
EN 3 About Batteries SAFETY PRECAUTIONS DANGER! Do not attempt to take the batteries Do not point the lens or the viewfinder directly into apart, or expose them to flame or excessive heat, as the sun. This can cause eye injuries, as well as lead there is a risk of fire or explosion. to the malfunctioning of internal circuitry. There is WARNING! Do not allow the battery terminals, or also a risk of fire or electric shock. the battery itself, to come in contact with metals, as this can result in a
ملخص المحتوى في الصفحة رقم 4
PROVIDED ACCESSORIES 4 EN AC Power Soft camera case Adapter/Charger AA-V90EG Hand strap Battery pack BN-V907U VIDEO/AUDIO cable VIDEO/AUDIO cable (Docking Station to TV or VCR, (camcorder to TV or VCR, RCA plug 4 RCA plug) ø 3.5 mini-plug 4 RCA plug) S-VIDEO cable Editing cable DC cord (ø 3.5 mini-plug, 2 poles)
ملخص المحتوى في الصفحة رقم 5
EN 5 JLIP Video Capture Docking Station GV-DS2 (referred to in TW the manual as “Docking Station”) Use of the JLIP Video Capture Docking Station enables you to capture video images from video sources such as camcorders and VCRs. Also refer to the JLIP Video Capture Docking Station's instruction manual. Remote control unit RM-V711U MiniDV Cassette Tape 30 min Power Pack CD-ROM (DVM-30) M-DV30ME CU-V900U The CD ROM contains the following 2 software programs: • JLIP Video Capture • JLIP Video Produ
ملخص المحتوى في الصفحة رقم 6
ABOUT DV 6 EN The digital video camera converts incoming audio and video signals into digital form for recording. A video signal is composed of a luminance signal (Y) and colour signals (R-Y and B-Y). These signals are identified and recorded digitally (Digital Component Recording). The A/D (Analogue to Digital) converter samples the Y signal at 13.5 MHz, and R-Y and B-Y at 6.75 MHz, and changes them to an 8-bit quantum signal. Sound sampled at 48 kHz is changed to a 16-bit quantum signal, and s
ملخص المحتوى في الصفحة رقم 7
CONTENTS EN 7 PROVIDED ACCESSORIES 4 ABOUT DV 6 GETTING STARTED 8 Charging The Battery Pack ....................................................................8 Installing The Battery Pack ...................................................................9 Indoor Use..................................................................................... 10 Using The Power Pack .......................................................................10 Date/Time Settings ............................
ملخص المحتوى في الصفحة رقم 8
GETTING STARTED 8 EN Charging The Battery Pack You can charge one battery pack at a time, or two consecutively. ATTACH Battery pack BN-V907U To AC outlet Power cord DETACH AC Power Adapter/Charger DC jack Charger indicator 2 Power lamp Charger indicator 1 SUPPLY POWER TO CHARGER DETACH BATTERY/BATTERIES 1 Plug the AC Adapter/Charger’s power cord in 4 Slide the battery or batteries in the direction of to an AC outlet. The power lamp comes on. the arrow and lift off. ATTACH BATTERY/BATTERIES •Reme
ملخص المحتوى في الصفحة رقم 9
EN 9 NOTES: c If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops. c When using the AC Power Adapter/Charger, be sure to use the supplied power cord only. c The AC Power Adapter/Charger is for use with the BN-V907U Battery Pack only. c When charging the Battery Pack for the first time or after a long storage period, the Charger Indicator may not light. In this case, remove the Battery Pack from the AC Power Adapter/
ملخص المحتوى في الصفحة رقم 10
GETTING STARTED (Cont.) 10 EN Indoor Use Using The Power Pack When using the camcorder indoors, you can use For extended use, prepare the Power Pack, which the AC Adapter instead of a battery. can be loaded with two battery packs. mark To AC outlet Power cord Power lamp Knob When power is AC Power Battery cover supplied, the power Adapter/Charger lamp lights. DC input jack DC cord Screw DC cord INSERT BATTERY 1 Open the battery cover while pressing the DC-IN knob and insert the end of the batt
ملخص المحتوى في الصفحة رقم 11
A L P 5S EN 11 Date/Time Settings Date and time will automatically be recorded on tape at all times. It is your choice to display it or not during playback (Z pg. 52). To set date and time follow the instructions from 1 to 5. LCD monitor Lock button REC MODE SP Power Dial WIDE MODE OFF ZOOM 20X DIS ON Power lamp GAIN UP AGC FLASH AUTO 4TO DATE / TIME MENU TO SYSTEM MENU END Recording Menu ON SCREEN OFF DISPLAY ON 4DATE / TIME 1 . 1 . 00 Select Dial 0 : 00 MENU RETURN MENU button Date/Time Menu R
ملخص المحتوى في الصفحة رقم 12
GETTING STARTED (Cont.) 12 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. OPEN/EJECT switch Cassette holder PUSH HERE Make sure the window side is facing out. Cassette cover Erase protection switch** NOTES: OPEN CASSETTE COVER c It takes a few seconds for the cassette holder to 1 Turn on the power, then slide the OPEN/EJECT open. Do not apply force. switch in the direction of the arrow. The c If you wait a few seconds and the cassette holder c
ملخص المحتوى في الصفحة رقم 13
A L P 5S EN 13 Recording Mode Setting Set depending on your preference. LCD monitor Lock button Recording Menu Power dial 4REC MODE SP WIDE MODE OFF ZOOM 20X DIS ON Power lamp GAIN UP AGC FLASH AUTO TO DATE / TIME MENU TO SYSTEM MENU END 4REC MODE SP WIDE MODE OFF ZOOM 20X MENU button DIS ON GAIN UP AGC Select Dial FLASH AUTO TO DATE / TIME MENU TO SYSTEM MENU Recording mode indicator END SP SP LP SELECT OPERATION MODE SET RECORDING MODE M 1 Set the Power Dial to “ ” while pressing 4 First move
ملخص المحتوى في الصفحة رقم 14
GETTING STARTED (Cont.) 14 EN Hand Strap Attachment Using The Soft Camera Case The provided Hand Strap helps you to keep a firm Keep the camcorder in the soft camera case when hold on the camcorder. Make sure you never hold transporting it. the camcorder without using the Hand Strap. 2 2 3 1 Velcro Flap Eyelet During transporting ... Thread your belt through the soft camera case's loop for no- hands carrying. 1 Loop Flap When putting the Hand strap camcorder with the Power Pack attached into th
ملخص المحتوى في الصفحة رقم 15
EN 15 Grip Strap Attachment Before attaching the grip strap, detach the hand strap from the camcorder (Z pg. 14). Zoom switch Hand strap eyelet START/STOP Pad Loop 3 Pad 1 2 Sub hand strap eyelet ATTACH GRIP STRAP TO HAND 1 STRAP EYELET Thread the end of the grip strap through the hand strap eyelet, then thread the other end of the grip through the loop. Pull firmly to ensure secure attachment. Tripod Mounting ATTACH GRIP STRAP TO SUB Align the tripod’s screw with the mounting socket on 2 HAND S
ملخص المحتوى في الصفحة رقم 16
5S M A GETTING STARTED (Cont.) 16 EN Dioptre Adjustment Adjust the viewfinder display for best viewing. Dioptre adjust lever Diopter adjust lever PAUSE SELECT OPERATION MODE ADJUST DIOPTRE 1 Set the Power Dial to “ A ”, or “ M ”. 3 Slide the Dioptre Adjust Lever located on the bottom of the viewfinder. TURN ON CAMCORDER 2 Pull out the viewfinder fully. •Slide in either direction, while looking at the viewfinder display, until it looks best to you. OFF Y A L P
ملخص المحتوى في الصفحة رقم 17
EN 17 Remote Control Unit You can use the RM-V711U to control the camcorder. When using the remote control, be sure to point it at the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or powerful lighting. START/STOP Button (Z pg. 66) PAUSE IN connector (Z pg. 60) Zoom Buttons (Z pg. 50) AUDIO MONITOR Button (Z pg. 65) DISPLAY Button (Z
ملخص المحتوى في الصفحة رقم 18
5S M A GETTING STARTED (Cont.) 18 EN Operation Mode Tuning the Power Dial allows you to choose the appropriate operation mode among the following modes: Full Auto mode ( A ), Manual mode ( M ), 5 second mode recording (5S), Self-Timer mode ( ) and “PLAY”. According to the Power Dial position you have selected, “F.AUTO” or “MANUAL” appears in the upper left corner. When set to A M When set to “ ” “ ”, “5S” or “ ” F . AUTO MANUAL PAUSE PAUSE To turn on the camcorder, first turn the Power Dial to
ملخص المحتوى في الصفحة رقم 19
5S M A RECORDING EN 19 Basic Recording You should already have performed the necessary preparations (Z pgs. 8 – 16). Set the Power Dial to “ A ” and try recording that way before attempting to use more advanced features. NOTE: Before starting recording, make sure you set the date and time (Z pg. 11). Even if they don’t appear during recording, you can display them during playback (Z pg. 53). Power lamp Display Lock button PAUSE Power Dial Record-Standby Display START/STOP button REC 444 During r
ملخص المحتوى في الصفحة رقم 20
5S M A 5S OFF M A RECORDING (Cont.) 20 EN Recording From The Middle Of A Tape When removing a tape on which you were recording, or when you resume recording on a tape after playing back the recording previously made (without taking the tape out between recordings), perform this procedure. Lock button Power Dial MENU START/STOP Button STOP REW FF PLAY/PAUSE SELECT OPERATION MODE START RECORDING 1 Turn the Power Dial to “PLAY” while pressing 5 Turn the Power Dial to any operation mode down the lo
