ملخص المحتوى في الصفحة رقم 1
12-1/2”
Auto Planer
41831 41831
Model 41831 41831 41831
Assembly & Operating Instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
© ®
Copyright 1999 by Harbor Freight Tools . All right reserved. No portion of this
manual or any artwork contained
ملخص المحتوى في الصفحة رقم 2
SPECIFICATIONS Motor: 115V/60Hz. 2.2 HP Cutting Capacity: Cuts per Minute: 16,000 Length of unbutted stock: 8” minimum No Load RPM’s: 8000 Width of stock: 12-1/2” max. Cutting Knives: 2, Bi-Metal, M-2 edge Thickness of stock: 1/4” - 6” Feed Rate: 23 feet per minute Depth of Cut: 1/8” max. Table Dimension: 12-9/16”L x 11-1/2”W Power Cord: 3-pole, UL approved Table w/ Extension: 23-1/8”L Overall Dimensions: 22” x 19-1/2” x 19” Sound Level: 98 DB Net Weight: 100 Lbs. INCLUDED ACCESSORIES Carbon Bru
ملخص المحتوى في الصفحة رقم 3
SAFETY WARNING & CAUTIONS READ ALL INSTRUCTIONS BEFORE USING THIS TOOL! 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of flammable gases or liquids. 3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or equipment. 4. STORE IDLE EQUIP
ملخص المحتوى في الصفحة رقم 4
12. REMOVE ADJUSTING KEYS AND WRENCHES. Be sure that keys and adjusting wrenches are removed from the tool or machine work surface before operation. 13. AVOID UNINTENTIONAL STARTING. Be sure that you are prepared to begin work before turning the start switch on. 14. STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired. 15. DO NOT OPERATE THIS MACHINE WHILE UNDER THE INFLUENCE OF ALCOHOL, DRUGS, OR PRESCRIPTION MEDICINES. 16. CHECK FOR DAMAGED PARTS. Before using a
ملخص المحتوى في الصفحة رقم 5
UNPACKING 1. Remove protective crating and materials carefully. In the event of damage in transit, contact Harbor Freight Tools. Be sure you have all small parts accounted for before discarding packing materials. 2. Check to be sure all parts are present. In addition to the planer, you should receive the accessories noted on page 2. You should also receive a crank handle, 2 carrying handles, and 2 table extensions, with their related hardware. If the 4 base brackets are not installed, they shoul
ملخص المحتوى في الصفحة رقم 6
COMPLETING ASSEMBLY WARNING: Be sure the machine is unplugged before attempting any assembly or adjustment operation. Attaching the Carrying Handles 1. Locate the two carrying handles (#349), and their hardware, Screws (#327). 2. Attach the handles to the top of the machine using the screws. Be sure the handles are firmly attached. Installing the table extensions 1. With the roller up, place each table extension bracket (#157) onto the table (#125) and attach using two cap screws (#164). Be sur
ملخص المحتوى في الصفحة رقم 7
SAFETY CHECK PRIOR TO OPERATION WARNING: Be sure the machine is unplugged and the power switch turned OFF when inspecting the machine. 1. Check to be sure all parts and fasteners are properly attached and tight. 2. Be sure the blade is properly installed and adjusted. 3. Check the operation of theTable Adjustment Handle (#150). One rotation of the handle will raise or lower the table by 2mm (0.0787”). Plug in the machine to prepare to check the motor and blade function. 1. Turn ON the machine b
ملخص المحتوى في الصفحة رقم 8
SUGGESTIONS FOR BETTER PLANING This tool is ideal for finishing wood boards. You can use it to level or remove veneers. You can level warped boards. You can convert rough boards into finished wood. You can shape boards to a desired size. Select your wood with care. 1. Be sure your wood is dry and properly cured. Green or wet wood will continue to shrink and may warp after planing. 2. Do not use splintered wood, or wood which may splinter while being worked. Some species such as Eucalyptus or Bam
ملخص المحتوى في الصفحة رقم 9
MAINTENANCE When not in use, keep the machine unplugged and covered. Store it in a dry place. Store the safety switch cover in a safe place to prevent unauthorized use. Unplug the machine before doing any maintenance. Regular lubrication is required to keep your planer in good condition, and assure a long service life. 1. Keep the table guide rods clean, and coated with a light coat of grease. 2. Occasionally remove the top and apply a light grease to the bearings at each end of the cutter head.
ملخص المحتوى في الصفحة رقم 10
TROUBLESHOOTING If you follow the instructions in this book, and adequately maintain and lubricate your Planer, it will give you many years of good service. Unplug the machine before attempting any repairs. If the Planer runs rough or has excessive vibration: 1. Check the Knife Blades to be sure they are not chipped, are securely installed, and are adjusted properly. 2. Check all chains and belts to be sure they are properly routed on their pulleys and sprockets, and are not loose. 3. Check to b
ملخص المحتوى في الصفحة رقم 11
#41831 12-1/2” AUTO PLANER PARTS LIST, MAIN UNIT Please refer to Parts Diagram on Page 12 P/N Description Quantity P/N Description Quantity 101 Washer , m6 2 133 Wood Screw 1 102 Cap Screw, m6 x 12 2 134 Base Bracket 4 103 Screw, m6 x 50 1 135 Cap Screw, m6 x 16 8 104 Washer , m6 1 136 Nut, m6 8 105 Retaining Ring, m15 1 137 Scale 1 106 Shaft 1 138 Washer, m6 8 107 Sprocket 1 139 Screw, m6 x 16 8 108 Retaining Ring, m15 1 140 Washer, m8 8 141 Right Cover 1 109 Shaft 1 142 Bolt Screw, m
ملخص المحتوى في الصفحة رقم 12
#41831 12-1/2” AUTO PLANER PARTS DIAGRAM, MAIN UNIT Please refer to Parts List on Page 11 Page 12 SKU # 41831 REV 08/01
ملخص المحتوى في الصفحة رقم 13
#41831 12-1/2” AUTO PLANER, ADDITIONAL PARTS LIST Please refer to Parts Diagrams on Page 14 and 15 P/N Description Quantity P/N Description Quantity Motor Assembly 201 Motor Housing 1 316 Bearing, 60203ZZ 2 202 Stator 1 317 Cutter Head 1 203 Washer, m5 1 318 Key, m5 x 5 x 20 1 204 Fan Casing 1 319 Driven Pulley 1 205 Screw, m5 x 85 2 320 Knife Gauge 1 206 Bearing, 6201ZZ 1 321 Adjustable Bolt 4 207 Silicone Steel Sheet 1 322 Non-Belt, J-750-6 1 208 Bearing, 6029ZZ 1 323 Nut, m16 x 1.5 2
ملخص المحتوى في الصفحة رقم 14
#41831 12-1/2” AUTO PLANER PARTS DIAGRAM, MOTOR ASSEMBLY Please refer to Parts List on Page 13 Page 14 SKU # 41831 REV 08/01
ملخص المحتوى في الصفحة رقم 15
#41831 12-1/2” AUTO PLANER PARTS DIAGRAM, CUTTER ASSEMBLY Please refer to Parts List on Page 13 Page 15 SKU # 41831 REV 08/01
