ملخص المحتوى في الصفحة رقم 1
TOPFIELD
TF100C
User Guide
Digital Cable Receiver
CONAX
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Contents iii Contents 1 Introduction 1 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Controlling the digital receiver . . . . . . . . . . . . . . . . . . 2 1.2.1 The front panel . . . . . . . . . . . . . . . . . . . . . . . 3 1.2.2 The remote control . . . . . . . . . . . . . . . . . . . . . 4 2 Setup 6 2.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.3 Rear
ملخص المحتوى في الصفحة رقم 4
iv Contents 3 Preference Settings 13 3.1 Language settings . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.2 Video and audio settings . . . . . . . . . . . . . . . . . . . . . . 15 3.2.1 Television standard . . . . . . . . . . . . . . . . . . . . 15 3.2.2 Colour model . . . . . . . . . . . . . . . . . . . . . . . . 15 3.2.3 Video cassette recorder . . . . . . . . . . . . . . . . . . 16 3.2.4 Television aspect ratio . . . . . . . . . . . . . . . . . . . 16 3.2.5 Audio mode . . . . . . .
ملخص المحتوى في الصفحة رقم 5
Contents v 6 Listing Services 33 6.1 Editing the favourite list . . . . . . . . . . . . . . . . . . . . . . 33 6.2 How to use on-screen keyboard . . . . . . . . . . . . . . . . . . 35 6.3 Transferring receiver data . . . . . . . . . . . . . . . . . . . . . 35 7 Firmware Update 37 7.1 Checking the firmware information . . . . . . . . . . . . . . . 37 7.2 From your computer via RS-232 port . . . . . . . . . . . . . . . 38 7.3 From another digital receiver via RS-232 port . . . . . . . . . . 39 Inde
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
1 Chapter 1 Introduction The TF 100 C digital receiver is fully compliant with the inter- national Digital Video Broadcasting (DVB) standard, and thus is able to receive digital broadcasts of that standard. NOTE In general we equate a channel with a frequency. Unlike ana- logue broadcasts, however, digital broadcasts are not all as- signed to their own frequencies; instead, multiple television broadcasts are transmitted through a single frequency. The fre- quency in digital broadcasting is usual
ملخص المحتوى في الصفحة رقم 8
2 Introduction • You can view information about the current television or radio programme. • Has an electronic programme guide that provides an overview of scheduled programmes. • You can update the firmware of the digital receiver to the latest version which would be provided by the manufac- turer. 1.2 Controlling the digital receiver You can operate the digital receiver with the remote control and the buttons on the front panel. NOTE When the digital receiver is off but plugged into a wall outl
ملخص المحتوى في الصفحة رقم 9
1.2 Controlling the digital receiver 3 1.2.1 The front panel The front panel of the digital receiver has buttons to control the digital receiver, and specific lamps and a display to indicate its status. The following indicates what they mean. STANDBY STANDBY button switches the digital receiver between standby mode and operation mode. lamp lights up whenever you press a button on the remote control. STANDBY lamp lights up while the digital receiver is in standby mode. CHANNEL , buttons switch to
ملخص المحتوى في الصفحة رقم 10
4 Introduction 1.2.2 The remote control
1 button switches the digital re- ceiver between standby mode and operation mode.
2 mutes the sound. Press again to switch it back on.
3 Numeric buttons are used to enter a service number for service change or to specify values for menu options.
4 switches between the current ser- vice and the previously viewed one. 5 FAV
displays the favourite lists. 6
MENU displays the main menu. It is also used to return to the previous menu fr
ملخص المحتوى في الصفحة رقم 11
1.2 Controlling the digital receiver 5 It is also used to select a menu item.
13 switches between television services and radio services.
14 SAT is not used in this model. 15
, buttons decrease or increase the volume. They are b d also used to change values for menu options.
16 , buttons switch to previous or next service. They are a c also used to navigate in menus and interactive screens. 17
These buttons have different functions per menu. They will be guided by on-screen hel
ملخص المحتوى في الصفحة رقم 12
6 Setup Chapter 2 Setup 2.1 Unpacking Before going any further, check that you have received the following items with your digital receiver. • Remote control unit • Two batteries for the remote control (AAA 1.5 V) • A copy of this user guide NOTE Accessories may vary according to your local area. 2.2 Safety precautions Please read carefully the following safety precautions. • The mains power must be 90 to 250 volts. Check it before connecting the digital receiver to the wall outlet. For the powe
ملخص المحتوى في الصفحة رقم 13
2.2 Safety precautions 7 • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moisture. The digital receiver is designed for use indoors only. Use dry cloth when cleaning the digital receiver. • Place the digital receiver on a firm and level surface. • Do not place the digital receiver close to heat emitting units or in direct sunlight, as this will impair cooling. Do not lay any objects such as magazines on the digi
ملخص المحتوى في الصفحة رقم 14
8 Setup 2.3 Rear panel connections The TF 100 C has some connections on the back. 4 7 R - AUDIO - L VCR RS-232 TV CABLE IN CABLE OUT VIDEO S/PDIF 1 2 3 5 6 8 Check what connections your television set has in comparison with the digital receiver. 1
CABLE IN Cable broadcasting signal input socket. 2
CABLE OUT Cable broadcasting signal output socket through the CABLE IN socket for another digital receiver. 3
VIDEO Composite video output socket for the televi- sion set. (yellow)
4 AUDIO L/R
ملخص المحتوى في الصفحة رقم 15
2.4 Connecting up your digital receiver 9 Table 2.3: Connectors specifications VIDEO Composite video (CVBS) output AUDIO Left & right audio output TV CVBS/RGB/YUV video output Left & right audio output VCR CVBS video output Left & right audio output CVBS video input for bypass Left & right audio input for bypass S/PDIF Dolby digital audio output RS-232 115.2 kbps at maximum 2.4 Connecting up your digital receiver There are several ways to set up the digital receiver. Set up the digital receiver s
ملخص المحتوى في الصفحة رقم 16
10 Setup then use the next connector in the following order for better picture quality. 1. SCART connector (TV) 2. Composite connector (VIDEO) You should configure audio and video settings after connecting up the digital receiver. See § 3.2 for detailed description. To use the SCART connector For best results with a standard television set, you should use a SCART cable, plugging one end into the TV socket on the digital receiver and the other end into a free SCART socket on your television. Some
ملخص المحتوى في الصفحة رقم 17
2.5 Switching on for the first time 11 To connect the audio connectors You will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital re- ceiver, and the other end into the matching sockets on your television or audio system. To enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to ob- tain a S/PDIF cable. Plug one
ملخص المحتوى في الصفحة رقم 18
12 Setup 2.5.1 Inserting batteries in the remote control To insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment. If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for the damage resulting from leaking batteries. NOTE Batteries, including tho
ملخص المحتوى في الصفحة رقم 19
13 Chapter 3 Preference Settings 3.1 Language settings You can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output. Select the System Setting> Lan- guage Setting menu. You should see a screen like the left figure. Menu language The digital receiver supports many menu languages: Dutch, English, German, French, Italian, Russian, Turkish and so forth. Set the Menu Language option to you
ملخص المحتوى في الصفحة رقم 20
14 Preference Settings Subtitle language Set the 1st Subtitle Language option and the 2nd Subtitle Lan- guage option to your desired languages. When you watch a programme, if the programme has a subtitle track of the lan- guage that is designated for the 1st Subtitle Language, it will be displayed. If the first language is not available but the second language is available, the subtitle of the second language will be displayed. If there is not any available language, no subtitle will be displayed
