Havis-Shields Telescoping Computer Base C-TCB-4 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TCB-4
TELESCOPING COMPUTER BASE
1995-2003 CHEVROLET/GMC
S-15 JIMMY, S-15 SONOMA, S-10 BLAZER, S-10 PICK-UP

TOOLS REQUIRED:
3/16” Allen wrench 3/8” Ratcheting wrench
3/8” Metric socket set Open-end wrench set
3/8” Standard socket set Powered drill w/ 3/16” drill bit

HARDWARE &COMPONENTS:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-4
1 Telescoping pole assembly CM93072-1
1 Side support brace CM93115
1 Lateral support brace CM93126
1 5/16-18 Nyl

ملخص المحتوى في الصفحة رقم 2

SUB ASSEMBLY: 1. Confirm receipt of all hardware and components. 2. Loosen or remove front inner and outer passenger seat bolts on vehicle. INSTALLATION: 1. Mount C-TCB-4 into vehicle • Slide pole support assembly between front inner seat base mount and floor of vehicle. • Loosely attached factory seat bolt. • Slide lateral support brace between front outer, seat base mount, and floor of vehicle. • Attach lateral support brace and side support brace to welded tab on side of pole