ملخص المحتوى في الصفحة رقم 1
TM
AP 720S
LCD Panel Guide
OPTIGEN®
Semi-Automated Instrument
ملخص المحتوى في الصفحة رقم 2
Confidentiality Notice The materials and information contained herein are being provided by Hitachi Chemical Diagnostics to its customer solely for customer’s use for its internal business purposes. Hitachi Chemical Diagnostics retains all rights, title, interest in and copyrights to the materials and information herein. The materials and information contained herein constitute confidential information of Hitachi Chemical Diagnostics and customer shall not disclose or transfer any o
ملخص المحتوى في الصفحة رقم 3
― Table of Contents ― Page 1 Operation Key…………………………………………………………... 3 2 Screen Display and Operation Method 2-1 Initialization……………………………………………………… 4 2-2 Main Menu………………………………………………………. 5 2-3 Panel Type Selection…………………………………………….. 6 2-4 Auto-Run (Process 1 to 7)………………………………………. 7 2-5 Auto-Run (Photoreagent Setup and Process 8)…………………. 9 2-6 Auto-Run (Process End)………………………………………… 10 2-7 Maintenance……………………………………………………... 11 2-8 Pause………………………
ملخص المحتوى في الصفحة رقم 4
1 Operation Key Display: Liquid Crystal Panel Operation Key: Only the touch panel key in the shaded field is executable. Press the Operation Key to execute the function. See Figure 1. Numerical Value Input Key: Numerical value can be registered by ‘ENT’ key. If the value entered is out of the defined range, beep sounds will be on for 3 times. ‘ESC’ key is used for returning to the original value. See Figure 2. (Figure 1) (Figure 2
ملخص المحتوى في الصفحة رقم 5
2 Screen Display and Operation Method 2-1 Initialization [Screen Display] (Figure 3) (Figure 4) [Summary] Figure 3 will display approximately 5 seconds after the power is turned on. Then the screen will change automatically to the initialization screen, Figure 4. After the completion of initialization, there is a beep sound and Main Menu screen, Figure 5 will display. [Operation Key] (Figure 4) Pause: To Figure 27 Pause screen 4
ملخص المحتوى في الصفحة رقم 6
2 Screen Display and Operation Method 2-2 Main Menu [Screen Display] (Figure 5) (Figure 6) [Summary] Figure 5 is the Main Menu screen after completion of Figure 4. Panel 36 is the default panel. Figure 6 is the Main Menu screen after selecting Panel 20 in Figure 7. [Operation Key] Panel 36: To Figure 7 Panel Type Selection screen Next: To Figure 8 Auto-Run screen Maintenance: To Figure 19 Maintenance screen 5
ملخص المحتوى في الصفحة رقم 7
2 Screen Display and Operation Method 2-3 Panel Type Selection [Screen Display] (Figure 7) [Summary] Select 36-allergen or 20-allergen panel in Figure 7. [Operation Key] 36: To Figure 5 Main Menu screen 20: To Figure 6 Main Menu screen 6
ملخص المحتوى في الصفحة رقم 8
2 Screen Display and Operation Method 2-4 Auto-Run (Process 1 to Process 7) [Screen Display] (Figure 8) (Figure 9) (Figure 10) (Figure 11) (Figure 12) (Figure 13) (Figure 14) (Continued on next page) 7
ملخص المحتوى في الصفحة رقم 9
(Auto-Run, cont.) [Summary] Figure 8 is a confirmation screen. The Operator needs to check that the Wash Buffer Bottle and Antibody Reservoir are filled, and that the Waste Bottle is emptied prior to the Auto-Run. Press “Start” key. The following screens will be displayed in order and Auto-Run will be executed: o Figure 9 displays the priming is in process. o Figure 10 displays the Rack and Pette setup is being checked. o Figure 11 displays the Rack and Pette setup is confirmed. o F
ملخص المحتوى في الصفحة رقم 10
2 Screen Display and Operation Method 2-5 Auto-Run (Photoreagent Setup and Process 8) [Screen Display] (Figure 15) (Figure 16) (Figure 17) [Summary] Figure 15 will alarm Operator that Photoreagent is needed. The display shows the elapsed time from the start of auto-pause. “Alarm Off” key will stop the alarm. “Continue” key will shift the screen to Figure 16. Figure 16 requests confirmation of Photoreagent setup. “No” key will return to the pre
ملخص المحتوى في الصفحة رقم 11
2 Screen Display and Operation Method 2-6 Auto-Run (Process End) [Screen Display] (Figure 18) [Summary] Figure 18 will alarm the Operator of the completion of Auto-Run. The display shows the elapsed time from the completion of Auto-Run. “Alarm Off” key will stop the alarm. “End” key will return to the Main Menu screen, Figure 5. “Rinse” key will shift the screen to Figure 22. [Operation Key] (Figure 18) Alarm Off: Stop beep sound End: To Figure 5 Mai
ملخص المحتوى في الصفحة رقم 12
2 Screen Display and Operation Method 2-7 Maintenance [Screen Display] (Figure 19) (Figure 20) (Figure 21) (Figure 22) (Figure 23) (Figure 24) (Figure 25) (Figure 26) (Continued on next page) 11
ملخص المحتوى في الصفحة رقم 13
(Maintenance, cont.) [Summary] Figure 19 provides the Prime, Rinse and Clock functions. [Operation Key] (Figure 19) Prime: To Figure 20 Prime Operation screen Rinse: To Figure 22 Rinse Operation screen Clock: To Figure 26 Time Setup screen Back: To Figure 5 Main Menu screen (Figure 20) Prior to Prime Operation, the Operator needs to set the Wash Buffer tube into the Wash Buffer Bottle, the water tube into the Deionized Water Bottle, & empty the Waste Bottle. “Ok” key will sta
ملخص المحتوى في الصفحة رقم 14
2 Screen Display and Operation Method 2-8 Pause [Screen Display] (Figure 27) (Figure 28) (Figure 29) (Figure 30) (Figure 31) (Figure 32) (Figure 33) (Figure 34) (Continued on next page) 13
ملخص المحتوى في الصفحة رقم 15
(Pause, cont.) [Summary] Figure 27 to Figure 33 the alarm will indicate that the current operation is paused. The screen will display the [Run Status] including the time elapsed from the start of the pause. A message “Information=” may be displayed in the screen, Figure 33. See [Supplement] below for details. “Continue” key will shift the screen to the original status, and resume the operation. For example, in Figure 30 Process was paused at pette #12 and the operation will resume o
ملخص المحتوى في الصفحة رقم 16
(Examples of alarm messages, cont.) o Example) “Information =C2 L” “C2 L” indicates failure from the head part of top/bottom carrier drive or sensor failure. After you confirm the status, press “CONTINUE” key and check the status. o Example) “Information =C2 H” “C2 H” indicates failure from the head part of top/bottom carrier drive or sensor failure. After you confirm the status, press “CONTINUE” key and check the status. o Example) “Information =C3 L” “C3 L” indicates failure
ملخص المحتوى في الصفحة رقم 17
2 Screen Display and Operation Method 2-9 Start/End Process and Position Setup [Screen Display] (Figure 35) Start End Process Process [Summary] Figure 35 will appear when power interruption occurs during Auto-Run or the current process is cancelled/paused during Auto-Run. Before re-starting the Auto-Run, the Operator needs to setup the START PROCESS NO., END PROCESS NO. and PETTE POSITION NO. according to the status at the interruption of Auto-Run
ملخص المحتوى في الصفحة رقم 18
2 Screen Display and Operation Method 2-10 Alarm [Summary] The alarm screen will appear when a problem occurs during the Auto-Run. The alarm will sound and can be stopped by pressing the “Alarm Off” key. There are two kinds of alarm screens. The first alarm screen is for confirmation. The Operator will confirm the failure or error displayed on the screen. Press “Ok” key to proceed to the next process. The second alarm screen requires action. The Operator needs to make a proper co
ملخص المحتوى في الصفحة رقم 19
Figure 37 - Alarm Screen of Data Initialization (Confirmation) [Screen Display] (Figure 37) [Summary] Figure 37 shows data error has occurred after initialization. The Operator needs to press “Ok” so that the data for the instrument will be recovered and the default values will be implemented. Re-entry of program and internal parameters may be required. If this is the case, please contact your Service Representative. Figure 38 - Alarm Screen of No Sample/Reagent
ملخص المحتوى في الصفحة رقم 20
Figure 39 - Alarm Screen of No Pettes [Screen Display] (Figure 39) [Summary] If the control software detects that there is no pette at the start of the run, Figure 39 will appear. If the run needs to be continued, setup pettes in the Pette Rack, and press ‘Retry’ key to continue. If the run needs to be cancelled, press ‘End’ key to end the Auto-Run. Figure 40 - Alarm Screen of Wrong Pette Setup [Screen Display] (Figure 40) [Summary] I
