ملخص المحتوى في الصفحة رقم 1
ghjkjhg
SMC7004VWBR V.2
SMC7004VWBR
ملخص المحتوى في الصفحة رقم 2
TM Barricade 2.4 GHz 11 Mbps Wireless Cable/DSL Broadband Router User Guide From SMC’s Barricade line of Broadband Routers May 2003 Pub. # 150000026400E
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS About the Wireless Barricade Router . . . . . . . . . 1 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the Wireless Barricade Router . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Syst
ملخص المحتوى في الصفحة رقم 4
TABLE OF CONTENTS Network Address Translation (NAT) . . . . . . . . . . . . . . . 50 Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 DDNS (Dynamic DNS) Settings . . . . . . . . . . . . . . . . . . . 61 UPnP (Universal Plug and Play) Setting . . . . . . . . . . . . 62 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Troubleshootin
ملخص المحتوى في الصفحة رقم 5
ABOUT THE WIRELESS BARRICADE ROUTER Congratulations on your purchase of the Wireless Barricade™ Broadband Router. SMC is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. IMPORTANT INFORMATION ! For DSL-User without a flat rate contract. With your DSL-router you have received a device of high quality, which allows you fast and easy access to the Internet. The factory default settings of this router have been don
ملخص المحتوى في الصفحة رقم 6
About the Wireless Barricade Router This disconnect only happens if there are no more open requests received from either the LAN or the WAN side (here this can be requests from the internet, i.e. initiated through the use of so called file sharing programs like eMule, eDonkey, etc.) that keep the router active. In order to counter such incalculable activity and protect yourself from higher than expected on-line costs we therefore recommend again a flat-rate contract for your DSL-connection
ملخص المحتوى في الصفحة رقم 7
LED Indicators The SMC7004VWBR V.2 includes status LED indicators, as described in the following figure and table. 4 Link/ACT SMC7004VWBR V.2 Speed LED Status Description PWR On The Wireless Barricade is receiving power. (Green) WLAN On The Wireless Barricade has established a valid wireless (Green) connection. WAN On The WAN port has established a valid network (Green) connection. Link/ACT On The indicated LAN port has established a valid network (Green) connection. Flashing The indicated L
ملخص المحتوى في الصفحة رقم 8
About the Wireless Barricade Router DHCP for dynamic IP configuration, and DNS for domain name mapping Stateful Packet Inspection (SPI) firewall with client privileges, hacker prevention, and NAT NAT also enables multi-user access with a single-user account, and virtual server functionality (providing protected access to Internet services such as Web, FTP, mail and Telnet) Virtual Private Network (VPN) support using PPTP, L2TP or IPSec pass-through User-definable application sens
ملخص المحتوى في الصفحة رقم 9
Installing the Wireless Barricade Router INSTALLING THE WIRELESS BARRICADE ROUTER Before installing the Wireless Barricade™ Broadband Router, verify that you have all the items listed under “Package Contents.” If any of the items are missing or damaged, contact your local SMC distributor. Also be sure that you have all the necessary cabling before installing the Wireless Barricade. After installing the Wireless Barricade, refer to the Web-based configuration program in “Configuring the Wir
ملخص المحتوى في الصفحة رقم 10
Installing the Wireless Barricade Router Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please retain the carton and original packing materials in case there is a need to return the product. Hardware Description The Wireless Barricade can be connected to the Internet using its RJ-45 WAN port . It can be connected directly to your PC or to a local area network using any of the Fast Ethernet LAN ports. Access speed to the Internet depend
ملخص المحتوى في الصفحة رقم 11
Hardware Description 4 RJ-45 ports for connection to a 10BASE-T/100BASE-TX Ethernet Local Area Network (LAN). These ports can auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X (i.e., allowing these ports to be connected to any network device with straight-through cable). These ports can be connected directly to a PC or to a server equipped with an Ethernet network interface card, or to a networking device such as an Ethern
ملخص المحتوى في الصفحة رقم 12
Installing the Wireless Barricade Router Item Description Reset Use this button to reset the power and restore the default factory Button settings. LAN Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub Ports or switch) on your local area network to these ports. WAN WAN port (RJ-45). Connect your cable modem, DSL modem, or an Port Ethernet router to this port. Power Connect the included power adapter to this inlet. Inlet Warning: Using the wrong type of power adapter may cause d
ملخص المحتوى في الصفحة رقم 13
Connect the System Connect the System The Wireless Barricade can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however comply with the following guidelines: Keep the Wireless Barricade away from any heating devices. Do not place the Wireless Barricade in a dusty or wet environment. You should also remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you in
ملخص المحتوى في الصفحة رقم 14
Installing the Wireless Barricade Router 3. Power on: Connect the power adapter to the Wireless Barricade. Internet Internet Access Wireless Cable/DSL Device Broadband Router Notebook with Wireless PC Card SOHO Office or Residence Figure 2. Connecting the Wireless Barricade Router Attach to Your Network Using Ethernet Cabling The four LAN ports on the Wireless Barricade auto-negotiate the connection speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, and the transmission mode to half duplex
ملخص المحتوى في الصفحة رقم 15
Attach to Your Network Using Radio Signals Install a wireless network adapter in each computer that will be connected to the Internet or your local network via radio signals. SMC currently offers several wireless network cards, including the SMC2602W and SMC2632W Wireless cards. Rotate both antennas on the back of the Wireless Barricade to the desired position. For more effective coverage, position one antenna along the vertical axis and the other along the horizontal axis. Try to place th
ملخص المحتوى في الصفحة رقم 16
Installing the Wireless Barricade Router Wired to Wireless Network Extension Internet Internet Access Device Notebook with Wireless PC Card Adapter Wireless Cable/DSL Broadband Router Wired LAN PC with Wireless PCI Adapter Figure 3. Making the WLAN Connections Attach the Wireless Barricade Router to the Internet If Internet services are provided through an xDSL or cable modem, use unshielded or shielded twisted-pair Ethernet cable (Category 3 or greater) with RJ-45 plugs to connect the broad
ملخص المحتوى في الصفحة رقم 17
Configuring Client TCP/IP CONFIGURING CLIENT TCP/IP If you have not previously installed the TCP/IP protocols on your client PCs, refer to the following section. If you need information on how to configure a TCP/IP address on a PC, refer to “Setting Up TCP/IP” on page 15. Installing TCP/IP Windows 95/98/Me 1. Click Start/Settings/Control Panel. 2. Double-click the Network icon and select the Configuration tab in the Network window. 3. Click the Add button. 4. Double-click Protocol. 13
ملخص المحتوى في الصفحة رقم 18
Configuring Client TCP/IP 5. Select Microsoft in the manufacturers list. Select TCP/IP in the Network Protocols list. Click the OK button to return to the Network window. 6. The TCP/IP protocol will be listed in the Network window. Click OK. The operating system may prompt you to restart your system. Click Yes and the computer will shut down and restart. Windows 2000 1. Click the Start button and choose Settings, then click the Network and Dial-up Connections icon. 2. Double-click the Loca
ملخص المحتوى في الصفحة رقم 19
Setting Up TCP/IP 4. Double-click Protocol. 5. Choose Internet Protocol (TCP/IP). Click the OK button to return to the Network window. 6. The TCP/IP protocol will be listed in the Network window. Click OK to complete the installation procedure. Setting Up TCP/IP To access the Internet through the Wireless Barricade, you must configure the network settings of the computers on your LAN to use the same IP subnet as the Wireless Barricade. The default network settings for the Wireless Barricade
ملخص المحتوى في الصفحة رقم 20
Configuring Client TCP/IP Note: These settings may be changed to suit your network requirements, but you must first configure at least one computer as described in this chapter to access the Wireless Barricade’s Web configuration interface.See “Configuring the Wireless Barricade Router” on page 27 for information on configuring the Wireless Barricade.) If you have not previously configured TCP/IP for your computer, refer to“Configuring Client TCP/IP” on page 13. The IP address of the co
