ملخص المحتوى في الصفحة رقم 12
7. The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm). How to View a Product’s Certification(s) 1. Go to www.zyxel.com. 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page. 12
ملخص المحتوى في الصفحة رقم 1
P-870H/HW-51a v2
VDSL2 4 port gateway /802.11bg
Wireless VDSL2 4 port gateway
Firmware v1.00
Edition 1, 7/2009
DEFAULT LOGIN DETAILS
IP Address: http://192.168.1.1
Username: admin
Password: 1234
Copyright 2009
ZyXEL Communications Corporation
www.zyxel.com
ملخص المحتوى في الصفحة رقم 2
Device Panels WLAN/WPS Button LEDS (Lights) (P-870HW-51a v2 only) WLAN/WPS LED (P-870HW-51a v2 only) Antenna (P-870HW-51a v2 only) Power Socket Ethernet Ports DSL Port and Power Switch 2
ملخص المحتوى في الصفحة رقم 3
ENGLISH ENGLISH Introduction The P-870H/HW-51a v2 is a VDSL2 gateway that provides super high- speed Internet access through a telephone line. The P-870H/HW-51a v2 has a built-in switch that allows you to connect up to four network devices. The P-870HW-51a v2 also provides IEEE 802.11b/g wireless networking capability. INTERNET Overview • Before You Begin, on page 4 • Hardware Connections, on page 5 • Initial Configuration, on page 7 • WLAN Setup with WPS, on page 10 • Wall-mounting, on
ملخص المحتوى في الصفحة رقم 4
Before You Begin Make sure you have the following things before you set up your P-870H/ HW-51a v2. • Internet access - account information provided by your ISP, such as user name, password, and so on. • Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled. See the User’s Guide for all configuration details including file sharing and setting up a shared printer. To read the User's Guide insert the CD that came in the box into your CD-ROM drive. A screen
ملخص المحتوى في الصفحة رقم 5
ENGLISH Hardware Connections This section shows you how to set up your P-870H/HW-51a v2. 1. DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if one is already installed). 2. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. 3. Use the power adaptor provided with your P-870H/HW-51a v2 to connect an appropriate power source to this socket. 4. Attach the antenna o
ملخص المحتوى في الصفحة رقم 6
Checking the LEDs (Lights) Look at the LEDs (lights) on the top panel of the P-870H/HW-51a v2. • The POWER light blinks during start-up and is green once the P- 870H/HW-51a v2 is ready. • Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected. The lights blink when the P-870H/HW- 51a v2 is sending or receiving data through the corresponding ETHERNET port. • The DSL light stays on if a physical DSL connection exists and blinks when transmitting data. • The I
ملخص المحتوى في الصفحة رقم 7
ENGLISH Testing Internet Connection After you have connected the hardware and turned on the P-870H/HW- 51a v2, open a web browser on your computer and go to any web site (for example, www.zyxel.com) to test your Internet connection. If you are prompted for a user name and password, enter the account information as given by your Internet service provider (ISP). If the INTERNET light is off but the DSL light is on, go to the Initial Configuration section to configure your Internet access sett
ملخص المحتوى في الصفحة رقم 8
If the login screen does not display, make sure you allow web browser pop-up windows, JavaScripts and Java permissions. Your computer should be also set to get an IP address automatically from a DHCP server. See the appendices in your User's Guide for more information. Internet Setup Go to Network > WAN > Internet Connection. Enter the Internet access information exactly as given to you by your ISP in the Internet Connection screen and click Apply. See your User’s Guide for detailed info
ملخص المحتوى في الصفحة رقم 9
ENGLISH 2. Enable wireless LAN, enter a name to identify your wireless network (such as “ZyXEL“) in the SSID field, and select a channel which is not used by neighboring wireless devices. 3. Select your security mode and configure wireless security settings. In this example, the P-870HW-51a v2 uses WPA2-PSK for data encryption. If you do not set wireless security, any one within range could use your P-870HW-51a v2 to access your network and the Internet. Make sure your wireless security s
ملخص المحتوى في الصفحة رقم 10
WLAN Setup with WPS This section applies to the P-870HW-51a v2 only. You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless network and add wireless devices to your wireless network at the touch of a button. The other wireless devices must also support WPS. Look for the WPS logo on the housing of your device. 1. Place a WPS-enabled device within range of the P-870HW-51a v2. 2. Press the WPS WLAN ON/OFF button ( ) on the P-870HW-51a v2 for five seconds. Press the WPS button
ملخص المحتوى في الصفحة رقم 11
ENGLISH Wall-mounting Take the following steps to hang your P-870H/HW-51a v2 on a wall. 1. Select a position free of obstructions on a sturdy wall. 2. Drill two holes for the screws, exactly 120 mm apart. 3. Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 4. Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 5. Make sure the screws are snugly fastene
