ZyXEL Communications P-661HW-D دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

P-661HW-D Series
802.11g Wireless ADSL2+ 4-port Security Gateway
Quick Start Guide
Version 3.40
Edition 1
3/2006

ملخص المحتوى في الصفحة رقم 2

P-661HW-D Series Quick Start Guide Overview Use the included CD or follow the directions in this Quick Start Guide to set up your P-661HW-D. How to use the included CD This CD provides multi-media animations that help you set up your P-661HW-D. 1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial. 2 At the end of the tutorial, click Configuration Genie. 1 Hardware Connections 1 Use a telephone wire to connect your P-661HW-D’s DSL port to a telephone jack or the DSL (or

ملخص المحتوى في الصفحة رقم 3

P-661HW-D Series Quick Start Guide If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are still off, contact your local vendor. 2 Status Page 1 In your browser, go to http://192.168.1.1. 2 Enter the default password user to go directly to the Status screen. If your browser cannot find this screen, check its security settings. See Troubleshooting for details. 3 See the User’s Guide for field descriptions of the Status screen. 3

ملخص المحتوى في الصفحة رقم 4

P-661HW-D Series Quick Start Guide 3 Internet and Wireless Setup 1 In your browser, go to http://192.168.1.1. 2 Enter the admin password 1234 to set up your 3 Follow the directions in this screen. It is highly internet and wireless connections and security recommended that you change the default settings. password. 4 Click Go to Wizard setup. Then, click Apply. 5 Click INTERNET/WIRELESS SETUP. Wait while your P-661HW-D tries to detect your DSL connection. 6 Follow the directions in the wiz

ملخص المحتوى في الصفحة رقم 5

P-661HW-D Series Quick Start Guide Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P- 661HW-D will create a WPA-PSK automatically. If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P- 661HW-D will replace the WEP key with a WPA-PSK. Enable OTIST only if your wireless clients support WPA and OTIST. You must enable OTIST on the P-661HW-D and all wireless clients within three minutes in any order. To start OTIST on

ملخص المحتوى في الصفحة رقم 6

P-661HW-D Series Quick Start Guide Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. 6