ملخص المحتوى في الصفحة رقم 1
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a commercial environment.
This equipment generates, uses and radiates radio frequency energy. If not
installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. Operation of this
equipment in a resid
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS About This Guide ...............................................................................................................1 Purpose ..........................................................................................................................1 Overview of this User’s Guide......................................................................................1 Introduction ......................................................................................
ملخص المحتوى في الصفحة رقم 3
ABOUT THIS GUIDE Congratulations on your purchase of this Cable/DSL 4-port Broadband Router. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. This router is a complete solution for sharing the Internet and other office resources. Purpose This manual discusses how to install the 4-port Broadband Router. Overview of this User’s Guide Introduction. Describes the Broadband Router and its features. Unpacking and Setup. Helps you get started with the b
ملخص المحتوى في الصفحة رقم 4
Online gaming: INTRODUCTION Your local area network allows you to play online games and use e- With the explosive growth of the Internet, accessing information and commerce services. services at any time, day or night, has become standard fare for most Firewall: people. The era of the standalone PC is waning. Networking technology is A built-in firewall function protects against hackers. moving out of the exclusive domain of corporations and into homes with at least two comp
ملخص المحتوى في الصفحة رقم 5
UNPACKING AND SETUP This chapter provides unpacking and setup information for the Broadband Router. Unpacking The box should contain the following items: One 4-port High Speed Broadband Router One external power adapter (5V DC, 800mA) One CD-ROM with User’s Guide Quick Installation Guide If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Broadband Router can be performed using the following steps: The pow
ملخص المحتوى في الصفحة رقم 6
The port 1 - 4 indicators light green when they’re connected to a 100Mbps HARDWARE INSTALLATION Fast Ethernet station. If the indicator blinks green, the corresponding LAN port is transmitting or receiving data. Front Panel Rear Panel The figure below shows the front panel of the Broadband Router. The figure below shows the rear panel of the Broadband Router. 4-Port 10/100Mbps Ethernet Broadband Router Front Panel 4 Port 10/100Mbps Ethernet Broadband Router Rear Panel POWER This i
ملخص المحتوى في الصفحة رقم 7
Check the installation Hardware connections The LEDs of the Internet Broadband Router are clearly visible and the status of the network link can be seen immediately: 1. Once the device is connected to the broadband modem and the Power is connected, the Power, System, LAN and WAN port link LEDs of the Internet Broadband Router will light up. 2. If the WAN port is linked to the ADSL/Cable modem, the WAN port’s Link/ACT LED will light up. 3. If the LAN port is linked to the computer system
ملخص المحتوى في الصفحة رقم 8
4. Click on the DNS configuration tab and select “Disable DNS”. PC NETWORK TCP/IP SETTING The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as follows. Windows 95/98/ME 1. Right click on the “Network neighborhood” icon and select properties. 2. Select the TCP/IP for your Ethernet adapter and then click properties. 3. Select “Obtain an IP address automatically” in the “IP Address” tab. 5. Click on the Gateway tab. If there ar
ملخص المحتوى في الصفحة رقم 9
Windows NT4.0 Click on the “Start” button located on the lower left corner of the menu Windows XP/2000 bar. 1. Right click My Network Places and select Properties Select “Settings” and then “Control panel.” 2. Double-click on the Local Area Connection icon and click In the “Control panel” window, select “Network” to enter the TCP/IP Properties. settings window. 3. Click on Internet Protocol (TCP/IP) and select Properties. 1. Set “IP address” to “Obtain an IP address automatically.”
ملخص المحتوى في الصفحة رقم 10
INTERNET BROADBAND ROUTER CONFIGURATION Quick Setup On the main webpage, select “Quick Setup” to specify the Time Zone and First, make sure that the network connections are functioning normally. the WAN connection type. This Internet Broadband Router can be configured using Internet Explorer 5.0 or later. 1-1 Time Zone Login to the Internet Broadband Router Select the appropriate time zone so your system clock can synchronize itself through the SNTP Server. 1. Open Internet Explorer
ملخص المحتوى في الصفحة رقم 11
1-2-1 Dynamic IP (Cable Modem) The Service Name, IP Address, and DNS Address fields must be To connect to a Dynamic IP (Cable Modem) Internet connection with the completed if your ISP provided Broadband Router, check the cable modem with the related user’s guide. you with this information. If your The Cable modem will automatically configure itself, and the Broadband ISP Provider provides a Dynamic Router is configured to automatically assign addresses to each PC. IP Address, you shoul
ملخص المحتوى في الصفحة رقم 12
control the connection time (default time=0, always connect). Check the 2-1-1 System Time Connect-on-demand box to enable your router to connect your ISP Connecting to a Simple Network whenever an Internet connection is required. Time Protocol (SNTP) server allows the Broadband Router to 1-3 DNS synchronize the system clock to the global Internet time through the The Domain Name System (DNS) is the way that Internet domain names SNTP Server. The synchronized are translated into Intern
ملخص المحتوى في الصفحة رقم 13
2-1-3 Firmware Upgrade To restore the factory default settings of the Broadband Router, select the “Restore Factory Default Configuration” option. Upgrading firmware for this Broadband Router improves functionality and performance. Enter the path and name of the upgrade file then click • Backup Settings the APPLY button below. You will be prompted to confirm the upgrade. Select the “Backup Settings” option to save the current settings in a file called “config.bin,” or save to a filename
ملخص المحتوى في الصفحة رقم 14
2-1-7 Reset 2-2-2 Static IP If the Service Provider has assigned a fixed IP address, enter the assigned IP 2-2 WAN address subnet mask and The Broadband Router supports the following types of Internet gateway address provided. connections: Dynamic IP Address, Static IP Address, PPPoE, and PPTP. Click “yes” if are using two or more IP addresses. 2-2-3 PPPoE (Dial-up xDSL) If you’re connecting to the Internet using a PPPoE (Dial- up xDSL) Modem and your ISP has provided you w
ملخص المحتوى في الصفحة رقم 15
The MTU feature specifies the largest packet size permitted for network If your ISP provided at least one DNS Server IP Address, type that IP transmission. Enter the value desired; for most DSL users, 1492 is Address in the Primary DNS address fields. You may also enter another recommended. By default, MTU is set at 1492. DNS Server IP Address; the Router will utilize these simultaneously for quicker access to functioning DNS Servers. The Maximum Idle Time feature can control the connection
ملخص المحتوى في الصفحة رقم 16
2-4 NAT Enter the username provided by your Dynamic DNS service provider. Network Address Translation (NAT) allows multiple users at the local site to access the Internet through a single public IP address. NAT can also • Password prevent hacker attacks by mapping local addresses to public addresses for Enter the password provided by your Dynamic DNS service key services such as the Web or FTP. provider. 2-4-1 Special Application Some applications require multiple connections, such as
ملخص المحتوى في الصفحة رقم 17
Specifically, UDP doesn't provide sequencing of the packets that the data arrives in. This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right order. Network applications that want to save processing time because they have very small data units to exchange (and therefore very little message reassembling to do) may prefer UDP to TCP. Example: Trigger Public ID Trigger Port Public Port Comment 2-4-2 Vi
ملخص المحتوى في الصفحة رقم 18
2-5-2 Client Filtering To block certain client PCs from accessing the Internet: You can filter Internet access for local clients based on IP addresses, application types, (i.e., HTTP port), and time of day. For example, this screen shows that clients in the address range 192.168.0.50-99 are permanently restricted from using FTP (Port 21), while clients in the address range 192.168.0.110-119 are blocked from browsing the Internet (port 80) from Monday to Friday and from 0:00AM to 11:00 PM
ملخص المحتوى في الصفحة رقم 19
2-5-4 DMZ (Demilitarized Zone) TECHNICAL SPECIFICATIONS If a local client PC cannot run an Internet application properly from General behind the NAT firewall, open the client up to unrestricted two-way Internet access by defining a PC as a virtual DMZ Host. Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE 802.3 Auto-negotiation Protocol CSMA/CD Data Transfer Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Rate Fast Ethernet: 100Mbps (half
ملخص المحتوى في الصفحة رقم 20
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES LIMITED WARRANTY NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S TRENDnet warrants its products against defects in material and SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR workmanship, under normal use and service, for the following lengths of REPLACEMENT. THE FOREGOING WARRANTIES AND time from the date of purchase. REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR TW100-
