ملخص المحتوى في الصفحة رقم 1
TD-8816B
ADSL2/2+ Ethernet Router
Rev: 1.0.1
1910010017
ملخص المحتوى في الصفحة رقم 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO.,
ملخص المحتوى في الصفحة رقم 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran
ملخص المحتوى في الصفحة رقم 4
Package contents The following contents should be found in your package: One TD-8816B ADSL2/2+ Ethernet Router One AC power Adapter for TD-8816B ADSL2/2+ Ethernet Router Quick Installation Guide One RJ45 cable Two RJ11 cables One Resource CD , including: This User Guide Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.
ملخص المحتوى في الصفحة رقم 5
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Product Overview...................................................................................................... 1 1.2 Main Features ........................................................................................................... 1 1.3 Conventions .....................................................................................................
ملخص المحتوى في الصفحة رقم 6
4.6.4 System Restart...............................................................................................................46 4.6.5 Diagnostic.......................................................................................................................46 4.7 Help......................................................................................................................... 46 Appendix A: Specification.................................................................
ملخص المحتوى في الصفحة رقم 7
TD-8816B ADSL2/2+ Ethernet Modem User Guide Chapter 1. Introduction 1.1 Product Overview Thank you for choosing the TD-8816B ADSL2/2+ Ethernet Modem. The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router is easy to use. The TD-8816B connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can
ملخص المحتوى في الصفحة رقم 8
TD-8816B ADSL2/2+ Ethernet Modem User Guide Supports Multiple PVC (Per manent Virtual Circuit). Built-in DHCP server. Built-in firewall, supports IP/MAC filter, Application filter and URL filter. Supports Virtual Server, DMZ host and IP Address Mapping. Supports Dynamic DNS, UPnP and Static Routing. Supports system log and flow Statistics. Supports firmware upgrade and Web management. 1.3 Conventions The Router or device mentioned in this User guide stands for TD-8816B witho
ملخص المحتوى في الصفحة رقم 9
TD-8816B ADSL2/2+ Ethernet Modem User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locates on the front panel, they indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On LAN port normal LAN Off Connection on LAN port abnormal Flash Data transmitting or receiving on LAN port Slow flash Connection to telecom network is abnormal ADSL Quick flash Connecting to the telecom n
ملخص المحتوى في الصفحة رقم 10
TD-8816B ADSL2/2+ Ethernet Modem User Guide devices. LINE: Through the port, you can connec t the Router with the telephone. 2.3 Installation Environment The Product should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be connected to the various devices as well as to a power source. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. The Router can be p
ملخص المحتوى في الصفحة رقم 11
TD-8816B ADSL2/2+ Ethernet Modem User Guide Figure 2-3 5
ملخص المحتوى في الصفحة رقم 12
TD-8816B ADSL2/2+ Ethernet Modem User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8816B or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop, right click My Network Places, and then select Properties (shown in Figure 3-1). Figure 3-1 Step 2: Right click Local Area Connecti
ملخص المحتوى في الصفحة رقم 13
TD-8816B ADSL2/2+ Ethernet Modem User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 7
ملخص المحتوى في الصفحة رقم 14
TD-8816B ADSL2/2+ Ethernet Modem User Guide Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK. Figure 3-4 Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above. Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd in the field, and
ملخص المحتوى في الصفحة رقم 15
TD-8816B ADSL2/2+ Ethernet Modem User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the Router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the Router's IP address is 192.168.1.1, your PC's IP addres
ملخص المحتوى في الصفحة رقم 16
TD-8816B ADSL2/2+ Ethernet Modem User Guide Step 1: Select the Quick Start tab, then click RUN WIZARD, and you will see the next screen. Click the NEXT button. Figure 3-8 Step 2: Configure the time for the Router, and then click the NEXT button. Figure 3-9 Step 3: Select the connection type to connect to the ISP (We select PPPoE/PPPoA mode for example here), and then click the NEXT button. Figure 3-10 Step 4: Configure the following options provided by your ISP: Username, Passwo
ملخص المحتوى في الصفحة رقم 17
TD-8816B ADSL2/2+ Ethernet Modem User Guide Figure 3-11 Step 5: Click NEXT to finish the Quick Start. Figure 3-12 11
ملخص المحتوى في الصفحة رقم 18
TD-8816B ADSL2/2+ Ethernet Modem User Guide Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will get help from this chapter to configure the advanced settings through the Web-based Utility. After your successful login, you can configure and manage the device. There are main menus on the top of
ملخص المحتوى في الصفحة رقم 19
TD-8816B ADSL2/2+ Ethernet Modem User Guide Figure 4-2 Note: Click the other submenus System Log or Statistics in Figure 4-2, you will be able to view the system log and traffic statistics about the Router. 4.2 Quick Start Please refer to " 3.2: Login". 4.3 Interface Setup Choose “Interface Setup”, you can see the next submenus: Internet and LAN. Figure 4-3 Click any of them, and you will be able to configure the corresponding function. 13
ملخص المحتوى في الصفحة رقم 20
TD-8816B ADSL2/2+ Ethernet Modem User Guide 4.3.1 Internet Choose “Interface Setup →Internet” menu, you can configure the parameters for WAN ports in the next screen (shown in Figure 4-4). Figure 4-4 ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
