IDEAL INDUSTRIES MINI C32 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

users guide
mini
Your Ideal users guide
See reverse for mini installation and servicing guide
C24/C28/C32
S24/S28
When replacing any part of this appliance, use only spare parts that you can be
assured conform to safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by Ideal Boilers

ملخص المحتوى في الصفحة رقم 2

Mini BOILER CONTROLS Mini C24 G.C. appliance No. 47---348---18 Mini C28 G.C. appliance No. 47---348---19 Mini C24 Mini C32 G.C. appliance No. 47---348---25A Mini C28 Mini S24 G.C. appliance No. 41---392---98 Mini C32 Mini S28 G.C. appliance No. 41---392---99 Destination countries: GB, IE INTRODUCTION Mini are wall mounted, room sealed, non condensing boilers A B C D E F G featuring full sequence automatic spark ignition and fan assisted combustion. Mini C24, Mini C28 and Mini C32 are low water c

ملخص المحتوى في الصفحة رقم 3

In these cases, however, it is advisable to install a small water CONTROL OF CH TEMPERATURE treatment device or softener. With such a device you should avoid periodic descaling. The output temperature of CH water is adjustable from a minimum of about 38°C to a maximum of about 85°C by Consequently, the DHW heat exchanger will keep its turning the knob C. performance consistent for a longer period of time with resulting gas savings. Approx CH flow temperatures for the boiler thermostat settings:

ملخص المحتوى في الصفحة رقم 4

Points for Boiler User Note. In line with our current warranty policy we would ask that you check through the following guide to identify any problems external to the boiler prior to requesting a service engineers visit. Should the problem be found to be other than with the appliance we reserve the right to levy a charge for the visit, or for any pre-arranged visit where access is not gained by the engineer. Troubleshooting – Typical Non Product Faults Problem Solution • Is there power to the b