NETGEAR ProSafe FVX538 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

b. For security reasons, the
2. RESTART YOUR NETWORK IN THE CORRECT SEQUENCE
firewall has its own user
Warning: Failure to restart your network in the correct sequence could prevent you

name and password.
from connecting to the Internet.
FVX538 ProSafe™ VPN Firewall 200
When prompted, enter
a. First, power on the broadband modems. Wait approximately 2 minutes until they
admin for the firewall User
power up.
Name and password for the
Start Here
b. Now, power on the FVX538.
firewall Pass

ملخص المحتوى في الصفحة رقم 2

3. WAN failure is detected using DNS queries to the DNS server or PING messages to Make sure the network settings of the computer are correct. Now, Configure WAN Rollover Mode an IP address. If the replies are not received, the WAN interface is considered down. Computers must be configured to obtain IP and DNS addresses automatically via DHCP. Fill in the appropriate fields: For help with this, please see the online FVX538 ProSafe VPN Firewall 200 Reference • Configured DNS Servers – In thi