NETGEAR ProSafe FVS336G دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

2. RESTART YOUR NETWORK IN THE CORRECT SEQUENCE
https://192.168.1.1
Warning: Failure to restart your network in the correct sequence could prevent you

from connecting to the Internet.
FVS336G ProSafe™ VPN Firewall
Note: To connect to the firewall, your computer needs to be configured to obtain
a. First, power on the broadband modems. Wait approximately 2 minutes until they
an IP address automatically via DHCP. If you need instructions on how to do this,
power up.
please refer to the online

ملخص المحتوى في الصفحة رقم 2

2. From the Auto-Rollover pull-down menu, select which WAN port will be primary. Make sure the network settings of the computer are correct. 3. WAN failure is detected using DNS queries to the DNS server or PING messages to Computers must be configured to obtain IP and DNS addresses automatically via DHCP. an IP address. If the replies are not received, the WAN interface is considered down. For help with this, please see the online FVS336G ProSafe VPN Firewall Reference Fill in the approp