NETGEAR DGFV338 ProSafe دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

• If you are using the Ethernet connection to an external modem, turn off and the Ethernet cable from the computer to the router is securely attached at
unplug the broadband modem. Insert the Ethernet cable from the modem both ends, and that the computer is turned on.

into the 10/100 WAN port (4) of the DGFV338.
DGFV338 ProSafe™ Wireless ADSL Modem VPN Firewall Router Configure the DGFV338 for Internet Access
Note: You can connect to both WAN ports if you are planning on using the WAN
rollove

ملخص المحتوى في الصفحة رقم 2

7. Click Apply to save your settings. • If you connected both, make sure you configured both ISP settings and selected Configure the WAN Mode Rollover Mode in the Wireless Mode settings. Verify wireless connectivity. Connect to the Internet or log in to the DGFV338 from a computer with a wireless adapter that is configured to match the settings you just applied The WAN ports of the wireless ADSL gateway can be configured for either a Dedicated Make sure the network settings of the computer a