ملخص المحتوى في الصفحة رقم 1
LevelOne
WBR-3407
11g Wireless ADSL Modem Router
User’s Manual
ملخص المحتوى في الصفحة رقم 2
Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 WBR-3407 Features .......................................................................................................... 1 Package Contents .............................................................................................................. 3 Physical Details....................................................................................
ملخص المحتوى في الصفحة رقم 3
Diagnostics ....................................................................................................................... 83 Remote Admin................................................................................................................. 84 Routing ............................................................................................................................. 86 Upgrade Firmware..............................................................................
ملخص المحتوى في الصفحة رقم 4
Chapter 1 Introduction 1 This Chapter provides an overview of the WBR-3407's features and capabilities. Congratulations on the purchase of your new WBR-3407. The WBR-3407 is a multi-function device providing the following services: • ADSL Modem. • Shared Broadband Internet Access for all LAN users. • WBR3407 for 802.11b and 802.11g Wireless Stations. • 4-Port Switching Hub for 10BaseT or 100BaseT connections. Figure 1: WBR-3407 WBR-3407 Features The WBR-3407 incorporates many ad
ملخص المحتوى في الصفحة رقم 5
WBR-3407 User Guide • Auto-detection of Internet Connection Method. In most situations, the WBR-3407 can test your ADSL and Internet connection to determine the connection method used by your ISP. • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the WBR- 3407 supports both Dynamic IP Address (IP Address is allocated on connection) and Fixed IP Address. Advanced Internet Functions • Application Level Gateways (ALGs). Applications which use non-standard connections
ملخص المحتوى في الصفحة رقم 6
Introduction • DHCP Server Support. Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices upon request. The WBR-3407 can act as a DHCP Server for devices on your local LAN and WLAN. Configuration & Management • Easy Setup. Use your WEB browser from anywhere on the LAN or WLAN for configuration. • Configuration File Upload/Download. Save (download) the configuration data from the WBR-3407 to your PC, and restore (upload) a previously-saved configura
ملخص المحتوى في الصفحة رقم 7
WBR-3407 User Guide Physical Details Front-mounted LEDs Figure 2: Front Panel Power LED On - Power on. (Green) Off - No power. Status LED Off - Normal operation. (Yellow) Blinking - This LED blinks during start up, and during a Firmware Upgrade. LAN For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each port. • 100BT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the correspondi
ملخص المحتوى في الصفحة رقم 8
Introduction Rear Panel Figure 3: Rear Panel Power port Connect the supplied power adapter here. 10/100BaseT Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. LAN connections Note: Any LAN port on the WBR-3407 will automatically function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable. Reset Button This button will reset the WBR-3407 to the factory default settings. (Reset to Defaul
ملخص المحتوى في الصفحة رقم 9
Chapter 2 Installation 2 This Chapter covers the physical installation of the WBR-3407. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and a DSL connection. • To use the WBR3407, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifications. Procedure Figure 4: Installation Diagram 1. Choos
ملخص المحتوى في الصفحة رقم 10
Installation 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Switching Hub ports on the WBR-3407. Both 10BaseT and 100BaseT connections can be used simultaneously. If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the WBR-3407 will automatically function as an "Uplink" port when required. 3. Connect ADSL Cable Connect the supplied ADSL cable from to the WAN port on the WBR-3407 (the RJ11 connector) to the ADSL
ملخص المحتوى في الصفحة رقم 11
Chapter 3 Setup 3 This Chapter provides Setup details of the WBR-3407. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions of the WBR-3407 you wish to use. Use the table below to lo
ملخص المحتوى في الصفحة رقم 12
Setup Configuration Program The WBR-3407 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or later Preparation Before attempting to configure the WBR-3407, please ensure that: • Your PC can establish a physical connection to the WBR-3407. The PC and the WBR- 3407
ملخص المحتوى في الصفحة رقم 13
WBR-3407 User Guide If you can't connect If the WBR-3407 does not respond, check the following: • The WBR-3407 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the WBR-3407's IP Address. (See next item.) • If
ملخص المحتوى في الصفحة رقم 14
Setup Common Connection Types Type Details ISP Data required Dynamic Your IP Address is allocated a) ADSL parameters (VPI and IP Address automatically, when you connect VCI) may be required, if they to you ISP. cannot be detected automatically. b) Some ISP's may require you to use a particular Hostname or Domain name, or MAC (physical) address. Static (Fixed) Your ISP allocates a permanent a) ADSL parameters (VPI and IP Address IP Address to you. VCI) may be required, if they Usua
ملخص المحتوى في الصفحة رقم 15
WBR-3407 User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" or "Administration". The main menu also contains two (2) buttons: • Log Out - When finished, you should click th
ملخص المحتوى في الصفحة رقم 16
Setup Mode Screen Use the Mode link on the main menu to reach the Mode screen. An example screen is shown below. Figure 6: LAN Screen Data - Mode Screen Device Mode This field displays the current name of this device. Device Name Device Mode Select the desired device mode for the router: • Router - Both the ADSL Modem and the Router features are operational. In this mode, this device can provide shared Internet Access to all your LAN users. • Modem - Only the ADSL Modem componen
ملخص المحتوى في الصفحة رقم 17
WBR-3407 User Guide LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. Figure 7: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the WBR-3407, as seen from the local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range. In the latter case, enter an unused IP Address from within the range used by your LAN. Subnet Mask The default value 255.255.255.0 is stand
ملخص المحتوى في الصفحة رقم 18
Setup DHCP What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is made when the client device starts up (boots). • The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address. • The WBR-3407 can act as a DHCP server. • Windows 95/98/ME and other non-Server versions of Windows will act as a DHCP client. This is the default Windows s
ملخص المحتوى في الصفحة رقم 19
WBR-3407 User Guide Wireless Screen The WBR-3407's settings must match the other Wireless stations. Note that the WBR-3407 will automatically accept both 802.11b and 802.11g connections, and no configuration is required for this feature. To change the WBR-3407's default settings for the WBR3407 feature, use the Wireless link on the main menu to reach the Wireless screen. An example screen is shown below. Figure 8: Wireless Screen Data - Wireless Screen Identification Regulatory Sel
ملخص المحتوى في الصفحة رقم 20
Setup Options Select the desired mode: Mode • g & b - Both 802.11.g and 802.11b Wireless stations will be able to use the WBR-3407. • g only - Only 802.11g Wireless stations can use the WBR-3407. • b only - Only 802.11b connections are available. 802.11g Wireless Stations will only be able to use the WBR-3407 if they are fully backward-compatible with the 802.11b standard. • Select the Channel you wish to use on your Wireless LAN. Channel No. • If you experience interference (shown
