HP (Hewlett-Packard) ProCurve Secure Router 7203dl J8753A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide 5991-2113
ProCurve Secure Router 7203dl
J8753A
Eth 0/2
ProCurve 7203dl
Slots
Secure Router
12 3
J8753A
Stat Stat Stat
Bkp Bkp Act
Power Tx Tx Test
Rx Rx
Console dl
Eth 0/1 wide
Fault
dl dl
INSTALL THE INTERFACE MODULE CONNECT TO THE PROCURVE SECURE ROUTER 7203DL CONSOLE
1. Verify the unit is not connected to a power source. Before connecting to the ProCurve Secure Router 7203dl Console interface you will need the
following items: VT100 terminal or PC (with VT100 terminal emu

ملخص المحتوى في الصفحة رقم 2

Quick Start Guide 5991-2113 ProCurve Secure Router 7203dl J8753A ENABLE TELNET ACCESS CONSOLE PINOUT The following steps create an IP address (2.2.2.1 /24) for Ethernet port 0/1, an enable password Pin Name Description of enablepw, and a password of secretpw for Telnet access. 1 — Unused 1. At the (config)# prompt, enter interface eth 0/1 to access the configuration parameters for 2 RD Receive Data (input) the Ethernet port located on the base unit. 3 TD Transmit Data (output) 2. Enter ip addre