ملخص المحتوى في الصفحة رقم 1
ADSL Broadband Router
AR-6024
User’s Manual
ملخص المحتوى في الصفحة رقم 2
Table of Contents Specification................................................................................................................ 2 Package Contents....................................................................................................... 5 Hardware Connecting.................................................................................................. 6 LED Indicators...............................................................................................
ملخص المحتوى في الصفحة رقم 3
Specification 4-Port Ethernet ADSL Router Features ADSL Compliance ANSI T1.413 i2 ITU G.992.1 (G.dmt) Annex A, B ITU G.992.2 (G.lite) Maximum downstream rate of 8Mbps Maximum upstream rate of 1Mbps Dying Gasp (optional) ATM Protocols and Encapsulations PPP over ATM (RFC 2364) PPP over Ethernet (RFC 2516) Bridged/Routed Ethernet over ATM (RFC 1483) Classical IP over ATM (RFC 1577) ATM Forum UNI 3.1/4.0 PVC 10 PVCs (simultaneous and encapsulation independent) VPI/VCI
ملخص المحتوى في الصفحة رقم 4
DHCP server/client/relay agent PPP auto reconnect and configurable timeouts PPP auto reconnect on WAN access PPP Auto, PAP, and CHAP 128 character support for PPPx username/passwords DNS proxy NAT, NAPT & Dynamic NAPT ALG support (FTP, SMTP/POP3, ICMP, NNTP, RTSP, IRC, CuSeeMe, Telnet, Messenger, EPIC games, id games, Sierra studios games) Wild Card DMZ Virtual server (Port mapping) VPN pass through (IPSec - ESP Tunnel mode, L2TP, PPTP) Bridge filtering ICMP IGMP MAC Address Spoof
ملخص المحتوى في الصفحة رقم 5
Hardware LAN: 4-Port 10/100Base-T (RJ-45) ADSL: One Port (RJ-11) Power: 9VAC 800mA LED indicators: Power, Ready (Status), ADSL, LAN ＊4 Reset button Certification: FCC Part 15/Part 68, CE, LVD Application Diagram Internet 4
ملخص المحتوى في الصفحة رقم 6
Package Contents ADSL Router CD-ROM containing Manual Ethernet Cable (CAT5 UTP Straight-Through) ADSL Cable (Standard telephone cable) USB Cable (Optional) Power Adapter Quick Installation Guide hardcopy 5
ملخص المحتوى في الصفحة رقم 7
Hardware Connecting 4 Port Ethernet ADSL Router Factory Reset Splitter (optional and changes depending on country specification) RJ-45 Ethernet port connect Ethernet cable here Power Adapter (9VAC/800mA) Power cord connect here RJ-11 ADSL port connect ADSL cable here 6
ملخص المحتوى في الصفحة رقم 8
LED Indicators 4 Port Ethernet ADSL Router Label Meaning Status Indicates PWR Power On Power is on Off Power is off RDY WAN Link Flashing Link being attempted by router. On Link established Off No link Flashes when data is being sent or LAN 1/ LAN 2/ LAN Link Flashing received on the LAN connection. LAN 3/ LAN 4 Indicates a link to your LAN or Network On card is active. Indicates no link to LAN Off 7
ملخص المحتوى في الصفحة رقم 9
General Setting You can use the RJ 45 cable or the USB cable connect to the ADSL Router. Please see the connecting procedures as below: Move your cursor as following sequence Start \ Settings \ Control Panel and click Control Panel. Then double-click on the Network Connections In the LAN or High-Speed Internet window, right-click on icon corresponding to your network interface card (NIC) and select Properties.(This icon may be labeled Local Area Connection). In the General Tab of t
ملخص المحتوى في الصفحة رقم 10
Highlight Internet Protocol (TCP/IP) under “This connection uses the following items.” by click on it once. Click on the Properties button. Select Obtain an IP address automatically: by clicking once in the circle. Click OK button to confirm and save your changes, and the close the Control Panel. Release IP & Renew IP, then Check Default Gateway: 10.0.0.2 9
ملخص المحتوى في الصفحة رقم 11
Launch your PC web browser and enter the URL: 10.0.0.2 In the User name/Password prompt, please type in admin/epicrouter as default. 10
ملخص المحتوى في الصفحة رقم 12
Now you can start browsing the web through the ADSL device. 11
ملخص المحتوى في الصفحة رقم 13
One Page Setup When working with wide area connections, the first thing you must do is to have the handle of the connection. Once you have the handle for a Connection you must define the PVC and protocol settings for it. LAN IP Address & Subnet Mask: The default is 10.0.0.2and 255.255.255.0 you can change it to another private IP address, such as 211.22.10.191 and 255.0.0.0. For most configurations it is recommended to leave it as default. Service Name: Enter the name of your ISP. Thi
ملخص المحتوى في الصفحة رقم 14
Password: Enter the password provided by your ISP. Disconnect Timeout: Disconnect Timeout means the router will disconnect after being idle for a preset amount of time. WAN Type: Select type from the list. VC Settings VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0). Default = 8. VCI: If instructed to change this, type in the VCI value for the initial connection (using PVC 0). Default = 35. Static IP Address: Enter the IP address provide
ملخص المحتوى في الصفحة رقم 15
Status Router The Home page shows the Firmware Version and WAN and LAN interface status. Firmware Version: This field displays the Firmware Version number. WAN: These fields display the IP Address, Subnet Mask, MAC Address for WAN interface. 14
ملخص المحتوى في الصفحة رقم 16
LAN: These fields display the IP Address, Subnet Mask, MAC Address for LAN interface. Number of Ethernet devices connected to the DHCP server: This field displays the number of DHCP clients connected to the ADSL Router. It also shows the IP address and MAC address of the attached DHCP clients. 15
ملخص المحتوى في الصفحة رقم 17
ADSL The ADSL Status page shows the ADSL physical layer status. Showtime Firmware Version: This field displays the ADSL data pump firmware version number. Line State: This field displays the ADSL connection process and status. Modulation: This field displays the ADSL modulation status for G.dmt or T1.413. Annex Mode: This field displays the ADSL Annex modes for Annex A or Annex B. Startup Attempts: This field displays the ADSL connection attempts after loss of showtime. Max Tx Power:
ملخص المحتوى في الصفحة رقم 18
PPP The PPP Status page shows the status of PPP for each PPP interface. See PPP. These fields display the following information on each PPP interface: Connection Name (user defined) Interface (PVC) Mode (PPPoE or PPPoA) Status (Connected or Not Connected) Packets Sent Packets Received Bytes Sent Byte Received Connect and Disconnect: Each PPP session can be individually controlled, simply enter the desired connection number into the “Connection #” field and select either co
ملخص المحتوى في الصفحة رقم 19
WAN Configuration: The WAN configuration page allows the user to set the configuration WAN/ADSL ports. Per VC Settings Virtual Circuit: Selection Enable or Disable. VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0). Default = 0. VCI: If instructed to change this, type in the VCI value for the initial connection (using PVC 0). Default = 0 MAC Spoofing: MAC Spoofing is developed to solve the scenario when the ISP only recognizes one MAC
ملخص المحتوى في الصفحة رقم 20
Bandwidth: Bandwidth setting takes effect only when the CBR is selected. The maximum available bandwidth is from the upstream data rate of ADSL status page. ENCAPSULATION: Selection follow as Table-1 Configuration BRIDGE: Enabling bridge mode will place the unit into Transparent bridge mode (like a Ethernet ADSL modem) to use this mode you should also set your WAN type to a Bridging option (e.g RFC1482 Bridge using LLC). IGMP: IGMP relay/proxy specification and environment: Support IGMP
