Delta Electronics Analog Output Module DVP04DA-S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DVP04DA-S Analog Output Module Explanation
1. Status indicator (Power, RUN and ERROR) 8. Expansion port
RS-485
CR
2. Model name 9. Expansion unit clip
Parameters Latched Register Name b15 b14 b13b12b11b10b9b8b7b6b5b4b3b2b1b0
No
Address
3. DIN rail clip 10. DIN rail (35mm)
#0 H 4032 ○ R Model type System used, data length is 8 bits (b7~b0). DVP-04DA model code=H 89
4. I/O terminals 11. RS-485 Communication port
#1 H 4033 ○ R/W Output mode setting Reserved CH4 CH3 CH2 CH1
Output mode setti

ملخص المحتوى في الصفحة رقم 2

bps. b0: 4800bps, b1: 9600bps, (factory setting) b2: 19200bps, b3: 38400 bps, b4: 57600 bps, b5: 6 INITIAL PLC START-UP Adaptive model API 115200 bps, b6-b13: reserved, b14: exchange low and high byte of CRC check code. (RTU mode Special module CR Lamp display TO ES EP EH only) b15=0: ASCII mode, b15=1: RTU mode. Communication format: ASCII mode is 7Bit, even bit, data write in 79 D P 1. When power is on, POWER LED will be lit and ERROR LED will