AMX NetLinx Integrated Controller NI-700 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
®
NI-700 NetLinx Integrated Controller
For more detailed installation, configuration, programming, file transfer, and operating
NI-700 Specifications (Cont.)
instructions, refer to the NI-700 and NI-900 NetLinx Integrated Controllers Instruction
Manual, available on-line at www.amx.com.
Rear Panel • IR/Serial (Port 3): 4-pin 3.5 mm mini-Phoenix port is capable of
Connectors supporting high-frequency carriers of up to 1.142 MHz with the
(Cont.): output being capable of

ملخص المحتوى في الصفحة رقم 2

Note: DIP switch 1 activates/deactivates the Program Run Disable Mode. DIP Connections and Wiring Switches 2,3, and 4 must remain OFF at all times. FIG. 2 shows the layout of the connectors and components located on the rear of the NI-700 NetLinx Integrated Controller. Baud Rate Settings Ethernet Baud Rate Position 5 Position 6 Position 7 Position 8 RS-232/422/485 (Ports 1 & 2) 9600 bps OFF ON OFF ON PORT 2 PORT 1 ETHERNET 10/100 38,400 bps OFF ON ON ON L/A SPD (default) 12VDC 4 3 2 1 57