Renesas Single-Chip Microcomputer M32180T2-PTC دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

M32180T2-PTC
Converter for In-circuit Connection (for M32180F8xFP)
Instruction Manual
Notes regarding these materials
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas
Solutions Corporation or a third party.
• Renesas Technology Corporation

ملخص المحتوى في الصفحة رقم 2

1. Outline The M32180T2-PTC is a converter for featuring the debugging function such as real-time tracing when using emulators M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E with the M32180F8xFP. 2. Package Components (1) M32180T2-PTC converter (2) YQPACK240SD (made by Tokyo Eletech Corporation) (3) NQPACK240SD (made by Tokyo Eletech Corporation) (4) YQ-GUIDE x4 (made by Tokyo Eletech Corporation) (5) Screwdriver (made by Tokyo Eletech Corporation) (6) M32180T2-PTC Instruction Manual (This manua

ملخص المحتوى في الصفحة رقم 3

5. Connection Procedure Connection to the M32100T2-SDI-E The procedure for connecting the M32180T2-PTC is shown according to applications. See Figures 2 to 4. 5.1 For the M32100T2-SDI-E (1) Mount the NQPACK240SD. (2) Mount the YQPACK240SD on the NQPACK240SD. (3) Secure the four corners of the YQPACK240SD with the YQ-GUIDE's. (4) Set the clock select switch. (5) Mount the M32180T2-PTC on the YQPACK240SD. (6) Connect the emulator probe to the M32180T2-PTC. : Position of No. 1 pin Be sure to matc

ملخص المحتوى في الصفحة رقم 4

5.2 For the M32100T-SDI-E and M32170T-SDI Connection to the M32100T-SDI-E or M32170T-SDI (1) Mount the NQPACK240SD. (2) Mount the YQPACK240SD on the NQPACK240SD. (3) Secure the four corners of the YQPACK240SD with the YQ-GUIDE's. (4) Set the clock select switch. (5) Mount the M32180T2-PTC on the YQPACK240SD. (6) Mount the M3T-PTC-CNV on the M32180T2-PTC. (7) Connect the probe of the emulation pod and the M32180T2-PTC via the SDI MCU control interface cable and the SDI trace interface cable. : P

ملخص المحتوى في الصفحة رقم 5

5.3 For Board-mounted Evaluation Connection for board-mounted evaluation (1) Mount the NQPACK240SD. (2) Mount the M32180F8xFP on the NQPACK240SD. (3) Mount the HQPACK240SD on the NQPACK240SD. : Position of No. 1 pin Be sure to match the position of No. 1 pin of the foot pattern and each part. Figure 4 Connection for board-mounted evaluation 6. Selecting a Clock Mount an oscillator to X2 as shown in the diagram printed on With the M32180T2-PTC, it is possible to select a clock the board. suppl

ملخص المحتوى في الصفحة رقم 6

7. External Dimensions and a Sample Foot Pattern of the M32180T2-PTC Unit: mm Figure 6 External dimensions and a sample foot pattern of the M32180T2-PTC ( 6 / 7 )

ملخص المحتوى في الصفحة رقم 7

8. Precautions CAUTION Cautions to Be Taken for Emulator: • For debugging, use this product in the combination with the M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E emulator. • When using with the M32170T-SDI or M32100T-SDI-E, the following restriction is applied according to the MCU operating frequency. - More than 66 MHz: Compared with the M32100T2-SDI-E, more loss of trace information occurs. - 66 MHz or less: Same as the M32100T2-SDI-E. • When using with the M32170T-SDI or M32100T-SDI-E, co