ملخص المحتوى في الصفحة رقم 1
PCA7425
PROM Programming Adapter for M34570E8-XXXFP
User's Manual
Rev.1.00
August 1, 2003
REJ10J0256-0100Z
ملخص المحتوى في الصفحة رقم 2
• TR4943, R4944A, R4945 and R4945A are trademarks of Advantest Corporation. Keep safety first in your circuit designs! • Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs,
ملخص المحتوى في الصفحة رقم 3
Contents 1. Precautions for Safety.........................................................................................................4 1.1 Safety Symbols and Meanings ..............................................................................4 2. Introduction ........................................................................................................................6 2.1 Things to Check When Unpacking .......................................................................6 3
ملخص المحتوى في الصفحة رقم 4
1. Precautions for Safety In both the User's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. 1.1 Safety Symbols and Meanings If the requirements shown in the "WARNING" sentences are ignored, the equ
ملخص المحتوى في الصفحة رقم 5
WARNING Warnings for Use Environment: • This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care should be taken that this temperature is not exceeded. • Select the proper programming mode of the PROM programmer. CAUTION Cautions to Be Taken for This Product: • Do not disassemble or modify this product. Disassembling or modifying this product can cause damage. Disassembling and modifying the product will void your warranty. • Use caution when handling this
ملخص المحتوى في الصفحة رقم 6
2. Introduction The PCA7425 is a PROM programming adapter for Renesas 4500 Series of 4-bit microcomputers. The adapter is a tool that can be used to write a program into internal PROM of microcomputers using a commercially available PROM programmer. This manual describes the specifications and operation of the PCA7425. Figure 2.1 shows the external view of the PCA7425 and the constituent parts. Figure 2.1 External view of the PCA7425 and its constituent parts 2.1 Things to Check When Unpacking T
ملخص المحتوى في الصفحة رقم 7
3. Specifications Table 3.1 lists specifications of the PCA7425. Table 3.1 Specifications of the PCA7425 MCU type M34570E8-XXXFP 1 MHz Operating clock frequency (Supplied by the ceramic oscillator mounted on the PCA7425.) Power supply Supplied from the Vcc of the PROM programmer IC socket IC51-0362-309 (Made by Yamaichi Electronics Co., Ltd.) Board to insert a programmable MCU PCA7425 (IC socket for 36-pin SOP is mounted on this board.) Interface board Board (Connected by two rows of standard-pi
ملخص المحتوى في الصفحة رقم 8
4. How to Write the Program This chapter describes the programming procedure with a PROM programmer. For the operation of the PROM programmer, refer to the instructions of the PROM programmer. 4.1 Programming Procedure Follow these procedures (1) through (6) to write the program into the MCU. (1) Read the program. Read the program into the PROM programmer. (2) Attach the adapter to the PROM programmer. (See Section 4.2) (3) Insert the MCU into the adapter. (See Section 4.3) (4) Check to erase th
ملخص المحتوى في الصفحة رقم 9
4.2 Attaching the Adapter to a PROM Programmer As shown in Figure 4.1, attach the pin No. 1 of the PCA7402D PROM programmer connector (Standard-pitch 28-pin pin-header mounted) to the pin No. 1 of the IC socket of the PROM programmer. Be careful when attaching the adapter because incorrect insertion can cause fatal damage to the MCU. Figure 4.1 Attaching the adapter to a PROM programmer 4.3 Inserting an MCU into Programming Adapter (1) As shown in Figure 4.2, set the slide bar of the IC socket t
ملخص المحتوى في الصفحة رقم 10
4.4 Precautions When Opening and Closing the IC Socket When opening and closing the IC socket to insert the MCU, hold the adapter horizontally. Otherwise the inside of the IC socket may become damaged and cause an electrical insulation failure. Figure 4.3 shows in diagrammatic form the opening and closing of the IC socket. Side view Figure 4.3 Opening and closing the IC socket 4.5 Precautions When Handling the Adapter Do not touch the connector in the IC socket and the pins on the PROM programme
ملخص المحتوى في الصفحة رقم 11
5. Recommended PROM Programmers The PROM programmers listed in Table 5.1 are recommended for the adapter. Using the actual products, we have verified that these PROM programmers can be used to write programs without problem. Nonconformity occurring by using any other PROM programmers can not be supported. For the latest type of PROM programmers, contact the manufacturer to confirm whether it can be used for your product. Table 5.1 Recommended PROM programmers Manufacturer Type name Device Progra
ملخص المحتوى في الصفحة رقم 12
MEMO ( 12 / 14 )
ملخص المحتوى في الصفحة رقم 13
PCA7425 User's Manual Rev.1.00 August 1, 2003 REJ10J0256-0100Z COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
ملخص المحتوى في الصفحة رقم 14
