Renesas Emulator MCU Board M37549T-RLSS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

M37549T-RLSS
Emulator MCU Board for 7548/7549 Group
User’s Manual



If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.


Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
Jul. 10, 2007
(1/4)
REJ10J1444-0100

ملخص المحتوى في الصفحة رقم 2

1. Outline The M37549T-RLSS is an emulator MCU board for the 7548/7549 Group. 2. Package Components (1) M37549T-RLSS 1 pc. (2) M37549T-RLSS User's Manual (This manual) 1 pc. (3) M37549T-RLSS User's Manual (Japanese) 1 pc. 3. Specifications Table 1 Specifications Emulator M38000T2-CPE * Operating mode Single-chip mode Vcc = 4.5 to 5.0 V: 8.0 MHz (frequency/2 mode) Vcc = 2.4 to 5.0 V: 2.0 MHz (frequency/2 mode) Maximum operating Vcc = 2.2 to 5.0 V: 1.0 MHz (frequency/2 m

ملخص المحتوى في الصفحة رقم 3

5. Connection Procedure to the user system Connect the emulation probe to the connector on the upper panel of the M37549T-RLSS. Connect the M37549T-RLSS to the 42-pin SDIP socket on the user system. Table 2 shows pin allocation of the M37549T-RLSS, and Figure 2 shows connector dimensions. Table 2 CN1 connector pin allocation Pin No Signal Pin No Signal 1 N.C 42 N.C 2 N.C 41 N.C 3 N.C 40 P13/AN3/KEY3 4 P14/AN4/KEY4 39 P12/AN2/CMP2 5 P15/AN5/KEY5 38 P11/AN1/CMP1 6 RESET 37 P10/AN0

ملخص المحتوى في الصفحة رقم 4

6. Oscillator Circuit This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN. The oscillator circuit on the user system may not work properly because the oscillator circuit pin of the emulator MCU is not close enough to the oscillator circuit of the user system. In this case, mount the oscillator circuit on the oscillator circuit pattern of the M37549T-RLSS. Figures 3, 4 and 5 show the M37549T-RLSS circuit pattern and diagram. JP2 JP3 JP2 JP3