ملخص المحتوى في الصفحة رقم 1
REJ10J0040-0600(T)
M3062PT3-RPD-E
User’s Manual
Emulation Pod for M16C/62P and M16C/30P Groups
Rev.6.00
Jul. 01, 2006
ملخص المحتوى في الصفحة رقم 2
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with ap- propriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-
ملخص المحتوى في الصفحة رقم 3
M3062PT3-RPD-E User’s Manual Preface Preface The M3062PT3-RPD-E is an emulation pod for the M16C/60 Series M16C/62P Group and M16C/30 Series M16C/30P Group of 16-bit MCUs. It is used with a PC4701 emulator (excluding the PC4701L and PC4700L). This user's manual mainly describes specifications of the M3062PT3-RPD-E emulation pod and how to setup it. For details on the emulator main unit and emulator debugger, which are used with the M3062PT3-RPD-E, refer to each product's user's manual.
ملخص المحتوى في الصفحة رقم 4
M3062PT3-RPD-E User’s Manual Important Important Before using this product, be sure to read this user’s manual carefully. Keep this user’s manual, and refer to this when you have questions about this product. Emulator: The emulator in this document refers to the following products that are manufactured by Renesas Technology Corp.: (1) PC4701 main unit (2) Emulation pod (3) Package converter board for connecting the user system The emulator herein does not include the customer’s
ملخص المحتوى في الصفحة رقم 5
M3062PT3-RPD-E User’s Manual Important Usage restrictions: This emulator has been developed as a means of supporting system development by users. Therefore, do not use it as a device used for equipment-embedded applications. Also, do not use it for developing the systems or equipment used for the following purposes either: (1) Transportation and vehicular (2) Medical (equipment where human life is concerned) (3) Aerospace (4) Nuclear power control (5) Undersea repeater If you are con
ملخص المحتوى في الصفحة رقم 6
M3062PT3-RPD-E User’s Manual Precautions for Safety Precautions for Safety Definitions of Signal Words In both the user’s manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. This symbol
ملخص المحتوى في الصفحة رقم 7
M3062PT3-RPD-E User’s Manual Precautions for Safety 警告警告 WARNING Warnings for AC Power Supply: If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. Use an AC power cable which complies with the safety standard of the country. Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock. This product is connected s
ملخص المحتوى في الصفحة رقم 8
M3062PT3-RPD-E User’s Manual Precautions for Safety 注意注意 CAUTION Cautions to Be Taken for Turning On the Power: Turn ON the power of the emulator and user system as simultaneously as possible. Turn OFF the power of the emulator and user system as simultaneously as possible. Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may be damaged. When turning ON the power again after shutting OFF the power, wait about 10 seco
ملخص المحتوى في الصفحة رقم 9
M3062PT3-RPD-E User’s Manual Contents Contents Page Preface......................................................................................................................................................................... 3 Releated Manuals........................................................................................................................................................ 3 Important....................................................................................
ملخص المحتوى في الصفحة رقم 10
M3062PT3-RPD-E User’s Manual Contents Page 3. Usage (How to Use the Emulator Debugger)........................................................................................................ 50 3.1. Making an MCU File .................................................................................................................................... 50 3.2 Setting the Work Area.................................................................................................................
ملخص المحتوى في الصفحة رقم 11
M3062PT3-RPD-E User’s Manual User Registration User Registration When you have purchased the emulator presented in this user's manual, please be sure to register it. As the H/W Tool Customer Registration Sheet is included with this manual, fill it in and FAX it to your local distributor or email the same contents to the following address. If you register it by email, you can use a text format for user registration created when installing the software in the following folder. Your regist
ملخص المحتوى في الصفحة رقم 12
M3062PT3-RPD-E User’s Manual Terminology Terminology Some specific words used in this user's manual are defined as follows: Emulator main unit (Hereafter PC4701) This means a generic name for emulators for M16C, 7700, 740 Families. Take note of the fact that the M3062PT3-RPD-E (this product) does not support the PC4701L and PC4700L emulators. For details on specific models of PC4701, visit the Renesas Tools Homepage at http://www.renesas.com/en/tools. Emulation pod This means the emu
ملخص المحتوى في الصفحة رقم 13
M3062PT3-RPD-E User’s Manual 1. Outline 1. Outline This chapter describes the package components, the system configuration and the preparation for using this product for the first time. 1.1 Package Components The M3062PT3-RPD-E package consists of the following items. When unpacking it, check to see if your M3062PT3-RPD-E contains all of these items. Table 1.1 Package components Item Quantity M3062PT3-RPD-E emulation pod 1 FLX120-RPD flexible cable for connecting PC4701 1 M3080
ملخص المحتوى في الصفحة رقم 14
M3062PT3-RPD-E User’s Manual 1. Outline 1.2 Other Tool Products Required for Development To bring forward programs development on the M16C/60 Series M16C/62P Group and M16C/30 Series M16C/30P Group, the products listed below are necessary in addition to those contained package above. Get them separately. Table 1.2 Other tool products required for development Product Product name Notes PC4701 Emulator main unit - (excluding the PC4700L and PC4701L) M16C PC4701 Emulator Debugger E
ملخص المحتوى في الصفحة رقم 15
M3062PT3-RPD-E User’s Manual 1. Outline 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 shows a configuration of the PC4701 system. (6 ) H ost m achine Interface cable (5) Emulator main unit Host machine (2) Flexible cable connecting PC4701 (1) Emulation pod (3 ) Flexible cable connecting user system Package converter board for connecting user system (4 ) (7) User system Figure 1.1 System configuration (1) Emulation pod M3062PT3-RPD-E (this product) Emulation
ملخص المحتوى في الصفحة رقم 16
M3062PT3-RPD-E User’s Manual 1. Outline 1.3.2 Names and Functions of the PC4701 Front Panel LEDs Figure 1.2 shows the names of the LEDs on the front panel of the emulator. Target status LEDs STATUS OF TARGET POWER POWER SAFE CLOCK System status LEDs ERROR RESET STATUS OF RUN SYSTEM HALT RESET HIGH PERFORMANCE EMULATOR Figure 1.2 Names of the LEDs on the front panel of the PC4701 (1) System Status LEDs The system status LEDs indicate the emulator PC4701's power supply, firmware
ملخص المحتوى في الصفحة رقم 17
M3062PT3-RPD-E User’s Manual 1. Outline (2) Target Status LEDs The target status LEDs indicate the target MCU's operating status and target board's power supply. Table 1.4 lists the definition of each target status LED. Table 1.4 Definitions of the target status LEDs Name Status Meaning ON Power is supplied to the user system. POWER OFF Power is not supplied to the user system. ON Target MCU clock is supplied. CLOCK OFF Target MCU clock is not supplied. ON Target MCU is being
ملخص المحتوى في الصفحة رقم 18
M3062PT3-RPD-E User’s Manual 1. Outline 1.4 Specifications Tables 1.5 and 1.6 list the specifications of the M3062PT3-RPD-E. Table 1.5 M3062PT3-RPD-E specifications (1/2) Item Description M16C/60 Series M16C/62P Group Applicable MCU M16C/30 Series M16C/30P Group Single-chip mode Usable MCU mode Memory expansion mode Microprocessor mode Maximum operating frequency 16MHz Applicable power supply 2.7 to 5.5V Internal ROM/RAM capacity : 0 wait, 16MHz(max) : 0 wait, 8MHz(max) Emu
ملخص المحتوى في الصفحة رقم 19
M3062PT3-RPD-E User’s Manual 1. Outline Table 1.6 M3062PT3-RPD-E specifications (2/2) Item Description Connecting the user system 80-pin 0.65mm pitch QFP see “2.8 Connecting the User (PRQP0080JA-A, (1) M3062PT-80FPB (not included) System” (page 30) Previous code: 80P6S-A) (1) M30800T-PTC (included) 100-pin 0.65mm pitch LCC socket + IC61-1004-051 (included) (1) M3T–F160–100NRB (not included) (2) M30800T-PTC (included) 100-pin 0.65mm pitch QFP + M3T-100LCC-DMS (not included) (PRQP0
ملخص المحتوى في الصفحة رقم 20
M3062PT3-RPD-E User’s Manual 2. Setup 2. Setup This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change settings. 2.1 Flowchart of Starting Up the Emulator The procedure for starting up the emulator is shown in Figure 2.1. For details, refer to each section hereafter. And, when the emulator does not start up normally, refer to “5. Troubleshooting” (page 96). Check the package components. Refer to “1.1 Package
