Omnitron Systems Technology iConverter T1/E1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

c. Connect to the RJ-45/48 connector on the iConverter T1/E1 converter via a Category 3
or better cable (Category 5 is recommended), and attach the other end to the network
equipment.
®
d. Connect an appropriate multimode or single-mode fiber cable to the fiber port of
iConverter T1/E1 Standalone Module USER MANUAL
the installed module. It is important to ensure that the transmit (TX) is attached to
The iConverter T1/E1 media converter provides standard T1 (1.544Mbps) or E1
the receive side of t

ملخص المحتوى في الصفحة رقم 2

DIP-Switch Position Line Type Port Type Distance 1 234 T1 DSX-1 RJ-45/48 0' to 133' Figure B: Dual Loopback Mode T1 DSX-1 RJ-45/48 133' to 266' T1 DSX-1 RJ-45/48 266' to 399' T1 DSX-1 RJ-45/48 399' to 533' T1 DSX-1 RJ-45/48 533' to 655' T1 DS1 RJ-45/48 0 dB Figure C: Fiber Optic Test Mode T1 DS1 RJ-45/48 -7.5 dB SW3 - FORCE 1S TO FIBER “FO1” T1 DS1 RJ-45/48 -15 dB When this DIP-switch is set to the “FO1” position, an “all ones” pattern is T1 DS1 RJ-45/48 -22.5 dB inserted into the data stream