NETGEAR RangeMax WN802T دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

f. Check the lights on the front of the wireless-N access point: e. Finally, select Basic Settings under the Setup menu on the left navigation pane

and configure the IP Settings for your network.

• Power: The green power light should be
Note: If you change the default subnet of the LAN IP address, you will be
lit. If the power light is not lit, check the
NETGEAR RangeMax™ NEXT Wireless-N Access Point WN802T
disconnected from the WN802T Wireless-N Access Point user interface. To
connectio

ملخص المحتوى في الصفحة رقم 2

I cannot configure the access point from a browser. Now, Verify Wireless Connectivity Technical Support Check these items: Using a computer with an 802.11g, 802.11b or 802.11n wireless adapter, verify Thank you for selecting NETGEAR products. • The WN802T is properly installed and it is powered on. Check that the Ethernet port connectivity by using a browser such as Netscape®, Internet Explorer or Mozilla LED is green to verify that the Ethernet connection is OK. To register your product, go