ملخص المحتوى في الصفحة رقم 1
USER’S
GUIDE
2 Gbit/s Fibre Channel
to PCI Host Adapters
Version 2.0
March 2002
®
DB15-000182-01
ملخص المحتوى في الصفحة رقم 2
Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
ملخص المحتوى في الصفحة رقم 3
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. The host adapter(s) referred to in this User's
ملخص المحتوى في الصفحة رقم 4
Document DB15-000182-01, Second Edition (March 2002) This document describes LSI Logic Corporation’s family of 2 Gbit/s Fibre Channel to PCI Host Adapter boards and will remain the official reference source for all revisions/releases of these products until rescinded by an update. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product
ملخص المحتوى في الصفحة رقم 5
Preface This book is the primary reference and user’s guide for the LSI Logic family of 2 Gbit/s Fibre Channel to PCI Host Adapter boards. It contains a complete functional description for each of these boards as well as complete physical and electrical specifications. Audience This document assumes that you have some familiarity with Fibre Channel protocol and related support devices and will benefit persons installing and using these boards. Organization This document has the following chapters
ملخص المحتوى في الصفحة رقم 6
Related Publications LSIFC929 Dual Channel Fibre Channel I/O Processor Technical Manual, August 2001 (LSI Order # S14073) LSIFC919 Single Channel Fibre Channel I/O Processor Technical Manual, October 2001 (LSI Order # DB15-000151-01) Fusion-MPT™ Device Management User’s Guide, September 2001 (LSI Order # DB15-000186-00) Revision Record Revision Date Remarks 1.0 06/01 First printing. 2.0 03/02 Final printing. Changes throughout, including addition of section covering Manual Selection of Fibre Cha
ملخص المحتوى في الصفحة رقم 7
Contents Chapter 1 Installing the 2 Gbit/s Host Adapters 1.1 General Description 1-1 1.2 Obtaining Windows NT/Windows 2000 Drivers 1-2 1.3 Quick Host Adapter Installation Procedure 1-2 1.4 Detailed Installation Procedure 1-3 1.4.1 Before You Start 1-3 1.4.2 Inserting the Host Adapter 1-3 Chapter 2 2 Gbit/s Host Adapter Characteristics 2.1 General Description 2-1 2.1.1 Hardware and Software Support 2-2 2.2 Features 2-3 2.2.1 PCI Interface 2-3 2.2.2 FC Interface 2-4 2.3 Physical Environment 2-4 2.
ملخص المحتوى في الصفحة رقم 8
2.6.3 LSI40919LO Host Adapter Configuration 2-10 2.6.4 LSI40919LO Connector and Indicator LED 2-11 2.6.5 LSI40919H Host Adapter Configuration 2-12 2.6.6 LSI40919H Connector 2-13 2.6.7 LSI40919LH Host Adapter Configuration 2-14 2.6.8 LSI40919LH Connector 2-15 2.6.9 LSI44929O Host Adapter Configuration 2-16 2.6.10 LSI44929O Connector and Indicator LED 2-17 2.6.11 LSI44929LO Host Adapter Configuration 2-18 2.6.12 LSI44929LO Connector and Indicator LED 2-19 2.6.13 LSI44929H Host Adapter Configuration 2-20
ملخص المحتوى في الصفحة رقم 9
4.3 Starting the Intel BIOS Configuration Utility 4-3 4.4 Using the Intel BIOS Configuration Utility 4-3 4.5 Main Menu 4-3 4.5.1 Adapter Properties Menu 4-4 4.5.2 Persistent IDs Menu 4-4 4.5.3 Device Properties Menu 4-5 4.5.4 Boot Adapter List Menu 4-5 4.5.5 Global Properties Menu 4-6 4.6 Exiting the Intel BIOS Configuration Utility 4-6 4.7 Troubleshooting 4-6 4.8 Open Boot BIOS 4-7 4.8.1 Open Boot BIOS Features 4-7 4.8.2 Identifying the Fibre Channel Disks 4-8 4.8.3 Verifying Correct Installation
ملخص المحتوى في الصفحة رقم 10
2.10 LSI44929O Connectors and Indicator LEDs 2-17 2.11 LSI44929LO Host Adapter Configuration 2-18 2.12 LSI44929LO Connectors and Indicator LEDs 2-19 2.13 LSI44929H Host Adapter Configuration 2-20 2.14 LSI44929H Connectors 2-21 2.15 LSI44929LH Host Adapter Configuration 2-22 2.16 LSI44929LH Connectors 2-23 2.17 ITI7004G2-LC Host Adapter Configuration 2-24 2.18 ITI7004G2-LC Connectors and Indicator LEDs 2-25 Tables 1.1 LSI Logic 2 Gbit/s Controllers and Associated Host Adapters 1-1 2.1 LSI Logic 2 Gbi
ملخص المحتوى في الصفحة رقم 11
Chapter 1 Installing the 2 Gbit/s Host Adapters This chapter contains general information about the LSI Logic family of 2 Gbit/s Fibre Channel (FC) to PCI host adapters. It also provides host adapter installation instructions and quick installation instructions for Windows NT or Windows 2000 device drivers. This chapter describes these topics: • Section 1.1, “General Description,” page 1-1 • Section 1.2, “Obtaining Windows NT/Windows 2000 Drivers,” page 1- 2 • Section 1.3, “Quick Host Adapter In
ملخص المحتوى في الصفحة رقم 12
to PCI boards in PCI computer systems with either a standard or Low Profile PCI (LPPCI) bracket type. 1.2 Obtaining Windows NT/Windows 2000 Drivers Before you begin the 2 Gbit/s Fibre Channel to PCI host adapter installation, create a Windows NT or Windows 2000 driver diskette by copying the driver files from either the LSI Logic SDMS CD-ROM or from the LSI Logic web site at http://www.lsilogic.com. If you obtain the driver software from the LSI Logic web site, the zipped package that you download
ملخص المحتوى في الصفحة رقم 13
Figure 1.1 illustrates an example of this host adapter board. Also refer to Chapter 2 to see more detailed drawings of the 2 Gbit/s host adapter boards. Step 3. Switch off the computer and unplug power cords for all components in your system. Step 4. Open your PC cabinet and select an appropriate open PCI slot. Step 5. Insert the host adapter board. Step 6. Make any configuration changes. Step 7. Close your PC cabinet cover. Step 8. Connect the FC cable to the host adapter. Step 9. Reconnect all
ملخص المحتوى في الصفحة رقم 14
Step 2. Remove the host adapter from the packaging and check that it is not damaged. Figure 1.1 illustrates an example of this host adapter board. Also refer to Chapter 2 to see more detailed drawings of the 2 Gbit/s host adapter boards. Step 3. Switch off the computer and unplug power cords for all components in your system. Step 4. Remove the cover from your computer per the instructions in the user’s manual for your system to access the PCI slots. Caution: Ground yourself by touching a metal
ملخص المحتوى في الصفحة رقم 15
Figure 1.1 Hardware Connections for the LSI Logic Host Adapter Fibre Channel Link Activity/ Link Fault LED SFF Optical Connector LSI Logic Host Adapter PCI Bus Edge Connector J1 Step 7. Carefully insert edge connector J1 (see Figure 1.1) of the host adapter into the PCI slot. Make sure the edge connector is properly aligned before pressing the board into place as shown in Figure 1.2. The bracket around connector J2 should fit where you removed the blank panel. Detailed Installation Procedure 1-5
ملخص المحتوى في الصفحة رقم 16
Figure 1.2 Inserting the Host Adapter Bracket Screw 32-bit PCI Slots 64-bit PCI Slots Step 8. Secure the board with the bracket screw (see Figure 1.2) before making the external FC link connection. Step 9. Reconnect all power cords and boot your PC. 1-6 Installing the 2 Gbit/s Host Adapters Rev. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
ملخص المحتوى في الصفحة رقم 17
Chapter 2 2 Gbit/s Host Adapter Characteristics This chapter provides specific details about the physical environment associated with the LSI Logic 2 Gbit/s Fibre Channel to PCI host adapters. This chapter includes these topics: • Section 2.1, “General Description,” page 2-1 • Section 2.2, “Features,” page 2-3 • Section 2.3, “Physical Environment,” page 2-4 • Section 2.4, “Operational Environment,” page 2-6 • Section 2.5, “IEEE Unique Address,” page 2-7 • Section 2.6, “Physical Characteristics,”
ملخص المحتوى في الصفحة رقم 18
Table 2.1 lists the 2 Gbit/s Fibre Channel to PCI host adapters discussed in this user’s guide. Table 2.1 LSI Logic 2 Gbit/s FC Host Adapter Descriptions Adapter Description LSI40919O 2 Gbit/s, Single-port, standard height bracket, optical LSI40919LO 2 Gbit/s, Single-port, low-profile bracket, optical LSI40919H 2 Gbit/s, Single-port, standard height bracket, copper, HSSDC LSI40919LH 2 Gbit/s, Single-port, low-profile bracket, copper, HSSDC LSI44929O 2 Gbit/s, Dual-port, standard height bracket, op
ملخص المحتوى في الصفحة رقم 19
Before you use any of this family of host adapters, make sure your system meets the specific hardware and software requirements shown in Table 2.2. Table 2.2 Hardware and Software Requirements Component Requirements For Solaris SPARC hardware environments Hardware Any Sun Microsystems computer with an avail- able CompactPCI slot Software Solaris 8 operating environment Firmware OpenBoot PROM, version 2.1 or greater For Intel IA-32 or IA-64 hardware environments Hardware Any Intel compatible Softw
ملخص المحتوى في الصفحة رقم 20
– Complies with PCI Local Bus Specification, Rev. 2.2 – 3.3 V interface (5.0 V tolerant) • Serial EEPROM configuration storage • Card edge keyed as a universal add-in card 2.2.2 FC Interface The LSIFC919/LSIFC929 contain the FC functionality for all the LSI Logic 2 Gbit/s Fibre Channel to PCI host adapters. The LSIFC919/LSIFC929 generate signal timing and link protocol in compliance with FC standards. The FC interface includes these features: • 2 Gbit/s serial link • LSIFC919/LSIFC929 functionalit
