Hypertec HYNEU010001 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

HyperNet
USB 10base-T Ethernet Adapter
HYNEU010001
USER GUIDE
Information in this document is subject to change without notice. All
rights reserved. All brand names are registered trademarks of their
respective companies.

ملخص المحتوى في الصفحة رقم 2

European Community (EC) Electromagnetic Compatibility Directive. This equipment has been tested and found to comply with the protections requirements of European Emission Standard EN55022 and the Generic European Immunity Standard EN50082-1. This equipment is designed to operate in a domestic environment and as such is tested to the EN55022 ITE domestic emissions limit. The domestic immunity standard EN50082-1 calls for the following basic standards: (a) IEC 801-2 Electrostatic Discharge (b) I

ملخص المحتوى في الصفحة رقم 3

small office/home office (SOHO) environments. The Hypertec USB Ethernet plugs directly into the USB port located on the back of most modern computers, and eliminates the need to open the PC when adding an Ethernet connection. About the Universal Serial Bus (USB) Universal Serial Bus (USB) is a peripheral bus standard developed by PC and telecom leaders such as Compaq, DEC, IBM, Intel, Microsoft, NEC and Northern Telecom. PCs equipped with USB allow computer peripherals once installed on a system

ملخص المحتوى في الصفحة رقم 4

running • Full Windows 98 support • Supports the energy-saving and suspend-and-resume functions • No external power supply is required • RJ-45 female connector for Ethernet 10Base-T connection • Dual LED status indicators for Link and Activity • Ideal for home PC users • Self diagnostics at initialisation HyperNet USB 10baseT Ethernet Adapter

ملخص المحتوى في الصفحة رقم 5

Remove the entire contents of the HyperNet USB Ethernet adapter package and verify that the following items have been included and none have been damaged during shipment: · HyperNet USB Ethernet Adapter · 3.5" USB Ethernet Software driver diskette · Installation Guide Connecting the USB Ethernet Adapter The USB Ethernet adapter hardware installation is a simple two-step process: 1. Connect the USB Type A plug into the USB port on the computer. 2. Attach a UTP or STP network cable (Category 3 or

ملخص المحتوى في الصفحة رقم 6

Figure 1. Choose Search for the best drivers for your device (see figure 2) 3. and click Next. Figure 2.

ملخص المحتوى في الصفحة رقم 7

Figure 3. 6. Click Next to confirm driver selection (see figure 4) Figure 4.

ملخص المحتوى في الصفحة رقم 8

Figure 5. 8. Click finish to complete network installation, remove the driver disk and click Yes to restart the computer (see figure 6) Figure 6. If at any time during installation you experience difficulties, please contact Hypertec Technical Support on +44 1488 686844 (01488 686844 in the UK).

ملخص المحتوى في الصفحة رقم 9

Data Transfer Rate: 10 Mbits/sec Ethernet Connector: Unshielded RJ-45 female connector Ethernet LED's: Green - Activity Yellow - Link Weight: 1.85 oz, 51gr. (Including the USB cable) Physical Dimensions: Length - 2.28" (58 mm) Width - 1.69" (43 mm) Thickness - 0.98" (25 mm) Operating Voltage: 5 V (powered via the USB connection) Power Consumption: 80mA (Active) 120mA (max) Operating Temperature: 0°-70°C Operating Humidity: 0% - 90% non-condensing Certifications: FCC Part 15, Subpart B class B

ملخص المحتوى في الصفحة رقم 10

pp become the property of Hypertec. This warranty applies only to the original registered end user purchaser of the product and does not include service to repair damage resulting from accident, disaster, misuse, abuse or non-Hypertec modification of the product. Additional components installed by the dealer or end user are not covered by this warranty. Apart from the above, no warranty is expressed or implied, including warranty of merchantability or warranty of fitness for use for a particular