ملخص المحتوى في الصفحة رقم 1
3COM Etherlink III 3C590 PCI 10BT
Network Adapter
Installation Guide
ملخص المحتوى في الصفحة رقم 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
ملخص المحتوى في الصفحة رقم 3
General information to read before installing General information to read before installing On all systems : before installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver kit (See install documentation) • Under CMOS setup, go to Adva
ملخص المحتوى في الصفحة رقم 4
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
ملخص المحتوى في الصفحة رقم 5
1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEU
ملخص المحتوى في الصفحة رقم 6
1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Windows NT 3.51 Server 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer. 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in
ملخص المحتوى في الصفحة رقم 7
2 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 2 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI,
ملخص المحتوى في الصفحة رقم 8
2 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Windows NT 4.0 Server 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the appropriate spaces and click on “Close” (Contact your network administrator if you do not have the required information). 10 Click on “YES” to restart the system when prompted. 11 Right-click on the “Network Neighborhood” icon and select “Prope
ملخص المحتوى في الصفحة رقم 9
3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Netware Requirements 3.12 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media. • Novell Netware 3.12 Server that supports IPX network protocol.
ملخص المحتوى في الصفحة رقم 10
3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Netware 3.12 Server 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer. 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the
ملخص المحتوى في الصفحة رقم 11
4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Netware Requirements 4.11 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22. • Microsoft Windows 95 SR2.5 media. • Novell Netware 4.11 Server that supports IPX network protocol.
ملخص المحتوى في الصفحة رقم 12
4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Netware 4.11 Server 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer. 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the
ملخص المحتوى في الصفحة رقم 13
5 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 5 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT
ملخص المحتوى في الصفحة رقم 14
5 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Windows NT 3.51 Server 8 Insert the 3COM 3C590 driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)” and click on “OK”. 11 With “3Com EtherLink III PCI Bus-Master Adapter (3C590)” listed in the “Network Adapters” window, click on “Next”. 12 Select the applicable network protoco
ملخص المحتوى في الصفحة رقم 15
6 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 6 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT
ملخص المحتوى في الصفحة رقم 16
6 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Windows NT 4.0 Server 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)” and click on “OK”. 11 With “3Com EtherLink III PCI Bus-Master Adapter (3C590)” listed in the “Network Adapters” window, click on “Next”. 12 Select the applicable network protocols and click on ”Next” (Contact your network administrator
ملخص المحتوى في الصفحة رقم 17
7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell Requirements NetWare 3.12 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Window
ملخص المحتوى في الصفحة رقم 18
7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 8 Insert the 3COM driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)” and click on “OK”. 11 With “3Com EtherLink III PCI Bus-Master Adapter (3C590)” listed in the “Network Adapters” window, click on “Next”. 12 Select the applicable network protocols
ملخص المحتوى في الصفحة رقم 19
7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
ملخص المحتوى في الصفحة رقم 20
8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell Requirements NetWare 4.11 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Window
