PYLE Audio PLTTB9U دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

USB/SD BELT DRIVE TURNTABLE PLAYER
PLTTB9U
READ THIS INSTRUCTIONS CAREFULLY BEFORE USE
AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE

ملخص المحتوى في الصفحة رقم 2

The turntable features: BEFORE USE 1. 3-speed turntable fit for 33 113,45,78 RPM Read this before operation 2. belt-drive and semi-automatic play tone arm • Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a 4. ceramic stereo cartridge with jewel stylus source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. 5. built-in 45 rpm adapter • The ventilation holes should not be covered. Make

ملخص المحتوى في الصفحة رقم 3

CONNECTION CARD (SDIMMC) into SD socket. 1. Connect the power cord to AC outlet 2. Set FUNCTION switch to USB/SD position, press SOURCE key to chopse music source 2. Switch the function selector to PHONO or USB/SD or TUNER function. Now your system is USB orSD. ready to play the music. 3. The device supports for Mp3 and WMA formats. During play status, press PLAYIPAUSE button once to halt playing, press it again to continue. ,. FM/AM OPERATION 4. Press PREY once to play the preview son

ملخص المحتوى في الصفحة رقم 4

record's edge 3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only. 4. If you use a stylus cleaning fluid, use it very sparingly. 5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of mild detergent solution to clean the turntable and dust cover. 6. Never apply harsh chemicals or solvents to any part of the turntable system. 7. Prior to moving the turntable, always unplug it from the AC outlet and fasten the ton