ADTRAN T1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta Dual T1/FT1 Network Interface Module (NIM) P/N 1200872L1
Quick Start Guide
INSTALLATION INSTRUCTIONS
WAN T1/1 WAN T1/2 DBU
1. Remove power from the unit.
2. Slide the option module into the option slot until the module is firmly
seated against the chassis.
3. Secure the pins at both edges of the module.
4. Connect the cables to the associated device(s).
SPECIFICATIONS
5. Complete the installation of the base unit.
Op

ملخص المحتوى في الصفحة رقم 2

For more detailed documentation, visit us online at www.adtran.com. ® NetVanta Dual T1/FT1 Network Interface Module (NIM) P/N 1200872L1 Quick Start Guide T1/FT1 NIM COMMANDS clock source [internal | line* | through] loopback remote payload Configures the source timing used for the interface. Use the no form of this command to return Sends a loopback code to the remote unit to initiate a payload loopback. A payload loopback to the default value. Note: the Dual T1 NIM supports a single clock sour