ADTRAN Network Interface Module T1/FT1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta T1/FT1 + DSX-1 Network Interface Module (NIM) P/N 1202863L1
Quick Start Guide
INSTALLATION INSTRUCTIONS
WAN-T1 DSX-1 DBU
1. Remove the power from the unit.
2. Slide the option module into the option slot until the module is
firmly seated against the chassis.
3. Secure the pins at both edges of the module.
4. Connect the cables to the associated device(s).
5. Complete installation of the base unit.
SPECIFICATIONS
6. R

ملخص المحتوى في الصفحة رقم 2

For more detailed documentation, visit us online at www.adtran.com. ® NetVanta T1/FT1 + DSX-1 Network Interface Module (NIM) P/N 1202863L1 Quick Start Guide T1/FT1 + DSX-1 NIM COMMANDS remote-loopback clock source [internal | line* | through] Configures the interface to respond to loopbacks initiated by a remote unit (or service provider). Use Configures the source timing used for the interface. Use the no form of this command to return to the the no form of this command to disable this featur