ملخص المحتوى في الصفحة رقم 1
FL2000 Series Fiber Optic Panel
Introduction
Single Fiber Access Swing-out Bulkhead
(Allows Full Access)
The FL2000 system is a flexible and modular series of
fiber products for today‘s and tomorrow‘s evolving
communications and data networks.
This product family is a complete line of modular panels
developed for rack and wall mounting. The system is
fully adaptable to small distribution frames, telephone
closet (TC) applications, or active equipment racks.
Rack Mount
Termination Panel
ملخص المحتوى في الصفحة رقم 2
FL2000 Series Fiber Optic Panel Introduction Product Overview Recommended Multi-purpose modular solution ideal for cabinet, rack, wall mount or medium Applications size frame applications. Ideal for small to medium fiber counts. Description Termination, termination/splice, storage, splice-only Number of fibers, 12 to 96 (up to 192 with LC connectors) future growth potential Flexibility/ Ideal for growth ability to grow Interconnect Yes Cross-connect Yes Accommodates Yes. Built-in on-frame splici
ملخص المحتوى في الصفحة رقم 3
FL2000 Series Fiber Optic Panel Fiber Termination/Splice Panel with Adapters or Pigtails Features • Termination and splice panel • Uses ADC’s splice deck or splice wheel • VCG ships with each panel • Uses FL2000 6paks with angled retainers 258 mm 498 mm (10.1") (19.6") 126 mm (5") 133 mm (5.25") 72-Position Termination/Splice Panel 24-Position Termination/Splice Panel (Shown Empty) Catalog Number C FL2 - 0- Panel Capacity Panel Height Number 1 12-position 3.5" (2 RU) of Ports 2 2
ملخص المحتوى في الصفحة رقم 4
FL2000 Series Fiber Optic Panel Empty Termination/Splice Chassis Features • Mounting - 19-inch EIA racks or cabinets, standard 24-Position Termination/Splice Chassis five-inch recess - Wall mounting option available - Other mounting kits available • Hinged on left front side for complete access to interior of termination section • Ability to quickly and easily configure, utiliz- ing the 6pak assemblies (ordered separately) • Complete line of accessories including locks for sec
ملخص المحتوى في الصفحة رقم 5
FL2000 Series Fiber Optic Panel Fiber Termination Panels with Multifiber Cable (Preterminated) Features • P anels with preterminated multifiber cable (IFC or OSP) ship as a single unit with cable clamp installed • Customizable panels come equipped with customer specified number of adapters, retainers, connectors, cable type and cable length • Panels with multifiber cable attached save costly installation time Termination Panels (With Multifiber Cable) Catalog Number FL2 - __ __ __
ملخص المحتوى في الصفحة رقم 6
FL2000 Series Fiber Optic Panel Fiber Termination Panels with Adapters or Pigtails Features • Termination-only panel • VCG ships with each panel • Uses FL2000 6paks with angled retainers 498 mm 257 mm (19.6") (10.1") 126 mm 133 mm (5") (5.25") 48-Position Termination Panel 72-Position Termination Panel Catalog Number FL2 - R 00 - 0 0 Number of Ports Panel Capacity Panel Height Loaded 1 12-position 1.75" (1 RU) 2 24-position 3.5" (2 RU) 2 Pigtail or Adapter Type 4 48-position 5.2
ملخص المحتوى في الصفحة رقم 7
FL2000 Series Fiber Optic Panel Empty Termination Chassis Features • Mounting - 19-inch EIA racks or cabinets, standard five-inch recess 24-Position Termination Chassis - Wall mounting option available - Other mounting kits available • Hinged on left front side; allows full access to rear of front plate and interior of panel • FL2000 6pak adapter plug-ins ordered separately • Equipped with removable metal doors with ®1 Plexiglass windows • Designation labels included with each p
ملخص المحتوى في الصفحة رقم 8
FL2000 Series Fiber Optic Panel Slack Storage Solutions Storage Deck Chassis Mounts with FL2000 termination panels to provide jumper storage. May be wall, rack or cabinet mounted. Storage Deck Storage Capacity (1 patch cord per deck) 1.7 mm patch cord 35 m (115') per deck Storage Deck Chassis 3.0 mm patch cord 20 m (66') per deck Storage Capacity (2 to 4 patch cords per deck) 498 mm 258 mm 1.7 mm patch cord 39 m (128') per deck (19.6") (10.1") 3.0 mm patch cord 29 m (95') per deck 126 m
ملخص المحتوى في الصفحة رقم 9
FL2000 Series Fiber Optic Panel Chassis Solutions 498 mm 258 mm (19.6") (10.1") Splice Chassis 126 mm (5") Features 89 mm (3.5") • Offers a combination of splicing protection and associated fiber/pigtail storage • S plice chassis can be mounted in conjunction with any FL2000 termination panel or as a stand-alone splice panel Splice Chassis • O ccupies same footprint and offers same mounting options as FL2000 termination Top panels Side • Accepts the ADC splice wheel for efficient Clea
ملخص المحتوى في الصفحة رقم 10
FL2000 Series Fiber Optic Panel Value-Added Module (VAM) Chassis The FL2000 VAM chassis is designed to accommodate ADC VAM plug-in modules in FL2000 installations. The chassis protects and manages optical components and is purchased empty, then loaded with various plug-in modules or blank plates, all of which can be mixed and matched. The chassis can be mounted in 5-inch recess, 19- or 23-inch rack mount, frame and cabinet environments. Vertical cable guides match the vertical cable manageme
ملخص المحتوى في الصفحة رقم 11
478 mm (18.8") 445 mm (17.5") 404 mm Rear Guard Box (15.9") (optional with some racks) Rack shown 49 mm as reference (1.9") 169 mm (6.7") FLUSH MOUNT 13 mm 13 mm (5") (5") FL2000 Series Fiber Optic Panel Panel Accessories – 19-Inch Rack Mount Installation Kits Standard Mount Kit Rear Guard Box Rack shown for reference (optional with some racks) 556 mm (21.9") 465 mm (18.3") 445 mm Features (17.5") • Panels shipped with - Left-side “L” bracket 127 mm 127 mm - Left-side 2.5" wide vertical
ملخص المحتوى في الصفحة رقم 12
FL2000 Series Fiber Optic Panel Panel Accessories – 19-Inch Rack Mount Installation Kits Maximum Mount Kit Allows entire panel to be contained within frame footprint. 556 mm (21.9") 483 mm (19") 465 mm (18.3") 445 mm Rack Shown (17.5") For Reference 5 127 mm 127 mm 74 mm (5") (5") (2.9") 19" Maximum Mounting 258 mm (10.1") 126 mm (5") New VCG with integrated mounting holes Maximum Mount Kit O r d e r i n g I n f o r m a t i o n Description Panel Height Catalog Number Maximum mount kit 1.75" (1
ملخص المحتوى في الصفحة رقم 13
FL2000 Series Fiber Optic Panel Panel Accessories – 23-Inch Rack Mount Installation Kits Wide VCG Mount Kit Allows for increased fiber capacity within the VCG. 657 mm (25.8") Rear Guard Box 546 mm (optional with (21.5") Rack shown some racks) for reference 127 mm 127 mm (5") (5") 567 mm (22.3") Wide VCG Mount Kit O r d e r i n g I n f o r m a t i o n Description Panel Height Catalog Number Wide VCG mount kit 1.75" (1 RU) FL2-23VCG0175 3.5" (2 RU) FL2-23VCG0350 Kit includes: VCG with integra
ملخص المحتوى في الصفحة رقم 14
FL2000 Series Fiber Optic Panel Panel Accessories – 23-Inch Rack Mount Installation Kits Centered Mount Kit Allows for standard mounting in a 23-inch rack. 657 mm (25.8") 567 mm Rear Guard Box (22.3") (optional with 546 mm Rack shown some racks) (21.5") for reference 127 mm 127 mm (5") (5") Extender Bracket Extender Bracket 465 mm (18.3") Centered Mount Kit O r d e r i n g I n f o r m a t i o n Description Panel Height Catalog Number Centered mount kit 1.75" (1 RU) FL2-EB0175P (with extender
ملخص المحتوى في الصفحة رقم 15
FL2000 Series Fiber Optic Panel Panel Accessories 6pak Adapter — Adapters and Pigtails Features • Can be purchased and installed as growth necessitates • Available with preterminated three- or five-meter pigtails • Pigtails consist of a single outer jacket containing six color-coded 900 µm fibers • One end of pigtail terminated with chosen connector style and installed into the 6pak Adapter 6pak adapters (Shown with SC Adapters and Pigtails) • Saves installation time Stranded Multi
ملخص المحتوى في الصفحة رقم 16
FL2000 Series Fiber Optic Panel Panel Accessories 6pak Adapter - Adapters only Features • Completely interchangeable between FL2000 panel, FL1000 rack and wall box products • Can be ordered with all standard types of 6pak Adapter adapters and connectors (Shown with Singlemode Simplex Adapters) • Featur e ADC‘s removable angled retainers which provide superior fiber management • No tools required to install into FL2000 and FL1000 products • Can be ordered with adapters only or for quic
ملخص المحتوى في الصفحة رقم 17
FL2000 Series Fiber Optic Panel Panel Accessories Splice Wheel and Splice Deck Top Side Clear Covers Splice Bottom Deck Splice Wheel Side Splice Chip(s) (Heat Shrink Shown) Splice Wheel Splice Deck O r d e r i n g I n f o r m a t i o n Description Catalog Number Splice wheel Heat shrink (single fiber fusion) FST-DRS12-HS Bare fusion FST-DRS12-FT Mechanical (mass fusion) FST-DRS12-MT* Splice deck Heat shrink (single fiber fusion) FL2-RSPLCE-HS Bare fusion FL2-RSPLCE-FT M
ملخص المحتوى في الصفحة رقم 18
FL2000 Series Fiber Optic Panel Panel Accessories Rubber Miscellaneous Grommets Clamp Bracket Cover Clamp Nuts (2) Plate Yokes (2) Cable Clamp Kit Interbay Management Panel E-501-L139 Locks Blank VCG 2.14 m (7') FL2-BLNKFULL0875 Bonding/Grounding Kit O r d e r i n g I n f o r m a t i o n Description Catalog Number 305 mm 64 mm Lock (12") (2.5") Key lock #1; includes lock and key #1 IPA-K1 End Guard Key lock #2; includes lock and key #2 IPA-K2 UEGP-7PW End guard (H x W x D)
ملخص المحتوى في الصفحة رقم 19
FL2000 Series Fiber Optic Panel Panel Accessories Ordering Information for Patch Cords and Attenuators ADC offers a comprehensive line of cable assembly and accessory products including patch cords, IFC ® assemblies, attenuators, FasTerm connectors and adapters to meet the demanding needs of today’s network. Please refer to the Fiber Cable Assemblies Catalog #102880AE at www.adc.com for more detailed information. For your convenience, ordering information for patch cords and attenuators can
