ملخص المحتوى في الصفحة رقم 1
Pico™ Controller
Bulletin 1760
Getting Results
ملخص المحتوى في الصفحة رقم 2
Solid state equipment has operational characteristics differing from those of Important User Information electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.ab.com/manuals/gi) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also
ملخص المحتوى في الصفحة رقم 3
Table of Contents Preface Who Should Use this Manual. . . . . . . . . . . . . . . . . . . Preface-i Purpose of This Manual. . . . . . . . . . . . . . . . . . . . . . . Preface-ii Common Techniques Used in this Manual . . . . . . . . . Preface-ii Rockwell Automation Support . . . . . . . . . . . . . . . . . Preface-iii Chapter 1 Pico Controller Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Simply Pico. . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
Table of Contents ii Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 5
Preface Read this preface to familiarize yourself with the rest of the manual. It provides information concerning: • who should use this manual • the purpose of this manual • related documentation • conventions used in this manual • Rockwell Automation support Use this manual if you are responsible for designing, installing, Who Should Use this programming, or troubleshooting control systems that use Pico Manual controllers. You should have a basic understanding of electrical circuitry and
ملخص المحتوى في الصفحة رقم 6
Preface ii This manual provides a basic overview of Pico and an introduction to Purpose of This Manual Pico programming. For a more detailed description of how to install and use your Pico Controller, refer to publication 1760-UM001, Pico Controller User Manual. Related Documentation The following documents contain additional information concerning Rockwell Automation products. To obtain a copy, contact your local Rockwell Automation office or distributor. For Read this Document Docu
ملخص المحتوى في الصفحة رقم 7
Preface iii Rockwell Automation offers support services worldwide, with over 75 Rockwell Automation Sales/Support Offices, 512 authorized Distributors and 260 authorized Support Systems Integrators located throughout the United States alone, plus Rockwell Automation representatives in every major country in the world. Local Product Support Contact your local Rockwell Automation representative for: • sales and order support • product technical training • warranty support • support ser
ملخص المحتوى في الصفحة رقم 8
Preface iv Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 9
Chapter 1 Pico Controller Safety Information Electrical Shock Hazard ATTENTION The electrical installation and commissioning work must only be carried out by suitably qualified personnel. Do not work on the device when the power is turned on. Observe the relevant safety regulations: • Turn off the power • Make sure that the device cannot be powered on again inadvertently • Check to make sure that no dangerous voltages are present before working on the device Clever Switching and Controlling
ملخص المحتوى في الصفحة رقم 10
Del Alt Ok Esc Del Alt Esc Ok 1-2 Pico Controller Applications Everywhere • Building and domestic automation, controllers for lighting, doors, window shutters • Control ventilators, rotating doors, greenhouses, exterior lighting, window controllers, shop display lighting • Create controllers for temperature, ventilation and brightness levels • Control machines and plant, presses, conveyor belts, oscillating conveyors, sorters, pumps Overview of Pico 1 2 7 3 4 8 7 5 8 6 5 8 3 5 Item D
ملخص المحتوى في الصفحة رقم 11
Pico Controller 1-3 Mount on DIN Rail 1 Mount Pico 1. Hook Pico to the top edge of the DIN rail and rotate into place while pressing down slightly as shown by the arrow. 2. Pico will clip into place and is secured by the built-in spring mechanism. 2 Mount on a Mounting Plate Pico can be screwed to a mounting plate with the three or four feet which are included. Click Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 12
1-4 Pico Controller Pico Inputs1760-L12BBB-xx, 1760-L12BWB-xx and Connect Pico 1760-L12DWD-xx 28.8 V 15.6 V l = 3.3 mA/24 V l = 3.3 mA/12 V 1 ≥ 15 V I7, I8 = 2.2 mA/24 V 1 ≥ 8 V I7, I8 = 1.1 mA/12 V 0 ≤ 5 V 0 ≤ 4 V BWB DWD BWB: +24 V DWD: +12 V l7, l8 0 V ~ > 1 A BWB: 0 V +10 V U = 24 V e (20.4 - 28.8 V) I = 80 mA e 5 - 7 lb-in 3.5 mm 10 V DWD: U = 12 V e 5 V (10.2 - 15.6 V) I = 140 mA 0 V e 0 510 +.. V COM l1 I2 I3 I4 I5 I6 I7 I8 BWB: +24 V DWD: +12 V Pico Inputs 1760-L12AWA-xx and 1
ملخص المحتوى في الصفحة رقم 13
Pico Controller 1-5 Pico Outputs 1760-L12AWA-xx, 1760-L12BWB-xx, 1760-L12DWD-xx, 1760-L12BBB-xx and 1760-L12NWA-xx 1 2 1 2 1 2 1 2 R L Q1 Q2 Q3 Q4 24 V 8 A 2 A 10 000 000 120 V 8 A 2 A 240 V 8 A 2 A 1000 W 0 V , N 10 x 58 W 25.000 8 A / B 16 L1, L2, L3 (120/240 V ) + 24 V Pico Inputs 1760-L18BWB-EX and 1760-L18BWB-EXND 28.8 V I1–I6, I9–I12 = 3.3 mA 24 V 1 ≥ 15 V I7, I8 = 2.2 mA 24 V 0 ≤ 5 V +24 V 0V l7, I8 z > 1 A 0V +10 V U = 24 V e (20.4–28.8 V ) I
ملخص المحتوى في الصفحة رقم 14
1-6 Pico Controller Pico Inputs 1760-L18AWA-xx and 1760-L18NWA-xx 264 V l1–I6, I9 –I12 = 0.5 mA 240 V l1–I6, I9 –I12 = 0.25 mA 120 V 1 > 79 V I7, I8 l = 6 mA 240 V 0 < 40 V l = 4 mA 120 V L1 L2 > 1 A U = 120/240 V e 50/60 Hz (85–264 V) l = 70 mA 120 V e 35 mA 240 V 5-7 lb-in. 3.5 mm L1 l1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 L2 100/240 V Input 100/240 V Pico Outputs 1760-L18xxx 12 1 2 1 2 1 2 1 2 1 2 R Q1 Q2 Q3 Q4 Q5 Q6 24 V 8A 2A < 10 000 000 120 V 8 A 2A 240 V 8A 2A 100
ملخص المحتوى في الصفحة رقم 15
Pico Controller 1-7 Pico Outputs 1760-L20xxx +24 V 0 V Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q Q F 10 A 0 V H R f 2.5 A + 24 V H 24 V H 0.5 A 0.5 A (20.4 – 28.8 V H) 5 W/24 V Pico Inputs 1760-IB12XOB8 R1–R12 = 3.3 mA; 24 V 28.8 V 1 ≥ 15 V 0 ≤ 5 V +24 V 0V > 1 A 5–7 lb-in U = 24 V e (20.4 –28.8 V ) I = 140 mA e 3.5 mm COM NC NC R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 +24V Input 24 V 24 V Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 16
1-8 Pico Controller Pico Outputs 1760-IB12XOB8 S1 S2 S3 S4 S5 S6 S7 S8 +24V dc COM 10A 0V R 24V 0.5A 0.5A 2.5A 5W/24V + 24V dc (20.4-28.8V dc ) Pico Inputs 1760-IA12XOW6I and 1760-IB12XOW6I 12 1 2 1 2 1 2 1 2 1 2 R S1 S2 S3 S4 S5 S6 24 V 8A 2A 10 000 000 120 V 8 A 2A 240 V 8 A 2A 1000 W 0 V , N 10 x 58 W 25.000 < 8 A / B 16 L1, L2, L3 (120/240 V) + 24 V Publication 1760-GR001C-EN-P - April 2005 ≤
ملخص المحتوى في الصفحة رقم 17
Pico Controller 1-9 Pico Outputs 1760-IA12XOW6I and 1760-IB12XOW6I 12 2 1 2 2 1 2 2 1 1 1 R S1 S2 S3 S4 S5 S6 24 V 8A 2A 10 000 000 120 V 8 A 2A 240 V 8 A 2A 1000 W 0 V , N 10 x 58 W 25.000 < 8 A / B 16 L1, L2, L3 (120/240 V) + 24 V Pico Outputs 1760-OW8 Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 18
Alt Del Ok Esc 1-10 Pico Controller Pico Operating Buttons Pico Operating Principle Button Function Del Delete object in the circuit diagram Alt Special functions in the circuit diagram Cursor Move cursor Buttons Select menu item Choose contact numbers, values, times, etc. Ok Next menu level, store your entry Esc Previous menu level, cancel your entry Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 19
Alt Ok Esc Pico Controller 1-11 Move Through Menus to Choose Values Press To Show system menu (press both keys at the same time). Del and • Go to next menu level. • Select menu item. • Store your entry. Cancel your entry since the last Ok. • Change menu item. • Change value. • Change position. 12-Point Status Display Inputs I12345678 Weekday MO Time 12:50 Outputs RUN/STOP mode Q1234 RUN On/ Off Publication 1760-GR001C-EN-P - April 2005
ملخص المحتوى في الصفحة رقم 20
1-12 Pico Controller 18-Point and 20-Point Status Display Inputs 1...5..8.... Retention Enabled IP Debounce Enabled/P-Buttons Enabled RE MO 02:00 ST Start-up Mode Day, Time .2..5..8 RUN Outputs Mode Inputs 1, 5, 8 ON Outputs 2, 5, 8 ON Menu Display Current choice PROGRAM... PASSWORD.. blinks in the Pico RUN... RUN... menu PARAMETER PARAMETER SET CLOCK.. SET CLOCK.. Main menu with and without password enabled Publication 1760-GR001C-EN-P - April 2005
