ملخص المحتوى في الصفحة رقم 1
PYD-1002/PYD-1005
ملخص المحتوى في الصفحة رقم 2
YourPYLEPROSeriesPerformanceMixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording. Please read this manual thoroughly before you attempt to set up a
ملخص المحتوى في الصفحة رقم 3
FeaturesandControls:PYD1002Mixer MIC 1(DJ Mic) DualDisplayMeter displays your choice Meter Mode Switch and LED Indicators permit Input Jack of Master Input Left and Right Levels, or you to display either Cue and Summed Program accepts balanced Phones Output Levels for CUE and PGM levels OR Left and Right Channel Levels or unbalanced inputs with either XLR or 1/4” plug BNC lamp socket allows you to add a 12V/3W lamp to MIC Talkover illuminate the control panel Switch lowers the levelofinputsource
ملخص المحتوى في الصفحة رقم 4
FeaturesandControls:PYD1005Mixer MIC 1(DJ Mic) DualDisplayMeter displays your choice Meter Mode Switch and LED Indicators permit Input Jack of Master Input Left and Right Levels, or you to display either Cue and Summed Program accepts balanced Phones Output Levels for CUE and PGM levels OR Left and Right Channel Levels or unbalanced inputs with either XLR or 1/4” plug MIC Talkover Switch lowers the BNC lamp socket allows you levelofinputsources, to add a 12V/3W lamp to permittingyoutotalk illumi
ملخص المحتوى في الصفحة رقم 5
PresettingtheControlsBeforeUse Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit. Set up the mixer controls like this before you start: CONTROL SETTING Power On/Off OFF Balance MID Tone Controls, Treble, Mid and Bass 0 MIC 1/2, CH 1/2/3, Master and Cue Levels 0 Crossfader CENT
ملخص المحتوى في الصفحة رقم 6
ConnectingtheMixerInputs This mixer permits connection of up to eight (8) audio input sources, including up to two microphones. Such a system might include, for example: Two Microphones Two Microphones Two Microphones Two Turntables Two Turntables Two Turntables Four CD players Two CD players Two CD players Two Cassette Decks One Rhythm Synth One Cassette Deck Do not connect any audio source with a HIGH LEVEL Please observe OUTPUT to the LOW LEVEL PHONO 1 or PHONO 2 mixer the following: audioinp
ملخص المحتوى في الصفحة رقم 7
ConnectingtheMixerInputs(cont.) 3. Turntables. Connect up to 2 turntables to the Phono 1 and Phono 2 input jacks. When using a turntable, you should also securely connect its ground wire (usually green or black) to the Ground screw on the input panel of the mixer. Use RCA type patch cables Magnetic cartridge turntable LEFT output RIGHT output GROUND wire from turntable 12V/3W lamp ConnectingtheLamp If you wish to intall a console lamp (not supplied), simply insert the plug end of an appropriate
ملخص المحتوى في الصفحة رقم 8
UsingtheMixerControls Turning on the Mixer 1. Turn on the output amplifier and temporarily set its volume to the minimum setting. 2. On the mixer, turn ON the power switch. The adjacent power LED will illuminate. 3. Turn on the audio input sources you wish to mix, and set them to play (or talk continuously into the microphone). 4. To monitor the audio input sources so that you can decide when to mix in each input, see “Monitoring ‘Cueing’ the Inputs.” 5. To mix the audio input sources so that yo
ملخص المحتوى في الصفحة رقم 9
MixingtheInputs Follow these steps to mix the audio input sources. 1. Perform Steps 1 and 2 of “Turning on the Mixer.” 2. Set the selected audio input source’s volume to its minimum setting, turn it on, and set it to play (or speak continuously into the microphone). 3. Set the following input source selectors Input Source as desired: Selector Switches Mixer Audio Input Channel Source Turntable connected to PHONO1 1 High level output audio source connected to the LINE 1 jacks Turntable connected
ملخص المحتوى في الصفحة رقم 10
UsingtheMicrophone Incorporating Voice into the Mix To blend voice from the microphone with the audio program material, adjust the turn the MIC 1 Talkover Switch to ON and use the MIC1 level slider to increase or decrease the microphone level. This will not affect the main volume inputs. When the microphone is not in use, set the MIC level slider to “0.” Talkover Mode Talkover mode allows a voice to be heard clearly through the microphone by attenuating all the other audio input sources. This mo
ملخص المحتوى في الصفحة رقم 11
UsingtheToneControls To enhance the sound or tailor the highs, mids (PYD-1005) and low frequencies for audio source input to the acoustics of a particular performance environment, you can adjust the BASS, MID (PYD-1005) and TREBLE tone controls.Rotatingthebasscontrol,forexample, will boost the bass frequencies in the bass range. Tone Controls Using the Frequency Kill Switches (PYD-1005) For unique circumstances or interesting special effects, you can completely eliminate the bass, mid or treble
ملخص المحتوى في الصفحة رقم 12
Using the Master Balance Control (PYD-1005) In the typical performance environment, you will want the sound to appear to be coming from a point midway between the speakers. If the sound appears to be louder from one speaker, adjust the Balance Control until the sound is properly balanced. Master Balance Control UsingtheMasterLevel Control The overall volume of the mix of all inputs is adjustedusingtheMasterLevelcontrol.Turning this control clockwise increases the overall system volume. Master Le
ملخص المحتوى في الصفحة رقم 13
Using the “Punch” Controls (PYD-1005 ) This featured control lets you smoothly and quickly turn a playing source on and off, or switch between the two different input sources assigned to Crossfade Channel A and B. The effect you get depends upon the position of the Crossfader. With the Crossfader at 100% Channel A (all the way to the left), pressing the Channel A PunchButtonwillmutetheChannelAmaterial. Punch Control Similarly,withtheCrossfaderat100%Channel B (all the way to the right), pressing
ملخص المحتوى في الصفحة رقم 14
Troubleshooting Your mixer should require very little maintenance. If you have problems, refer to the chart below for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance. PROBLEM POSSIBLE SOLUTION Nothing works • Check the AC connection. Make sure the AC outlet is “live.” • Check the power connection to the rest of the system (receiver/amplifier, etc.) Nosignalfroman • Check the control setting audio input • Check the connection between the mixer an
ملخص المحتوى في الصفحة رقم 15
Please complete warranty card, detach and return ThankyouforpurchasingthisPYLE product. To activate your warranty registration card warranty, please mail this card within 10 days. PYLE PRO MIXERS Name Address City, State ZIP Model No. Serial # (if available) Date of Purchase Purchased at: Music Products Store Sound Contractor/Installer Mail Order Catalog Merchandiser Other Specifications PYD1002/1005 Input Sensitivity/Impedance Distortion Mic 1.5 mV/600 Ohms Mic 0.50% Phono 1-2 3.0 mV/50K Ohms P
