ملخص المحتوى في الصفحة رقم 1
American Audio®
™
XDM-250T
“TURNTABLE PRO”
Professional Preamp Mixer
American Audio
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
ملخص المحتوى في الصفحة رقم 2
XDM-250T™ Unpacking Every XDM-250T™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment neces- sary to operate the mixer has arrived intact. In case damage has been found or parts are missing, please contact our toll free customer support number for
ملخص المحتوى في الصفحة رقم 3
XDM-250T™ Safety Precautions • Do not spill water or other liquids into or on to your mixer. • For adult use only - Keep out of the reach of children. • Always use a power supply that meets the manufactures exact power specifications • Be sure that the local power outlet match that of the required voltage for your power supply. • Do not attempt to operate this mixer if the power cord has been frayed or broken. • Disconnect from main power before making any type of connection.
ملخص المحتوى في الصفحة رقم 4
XDM-250T™ Controls and Features 1 Top Panel 18 2 17 3 4 16 15 5 6 14 7 8 13 12 9 10 11 Front Panel 11 10 1. Cue Level - This knob control the volume level for the headphone output level. Be sure the cue level is set to minimum before putting your headphones on. 2. Mic Level - This rotary knob is used to control the microphone volume output level. 3. Channel 1 Treble Control - This control is used to increase (+20dB) or decrease (-30dB) the high frequency volume applied to the
ملخص المحتوى في الصفحة رقم 5
XDM-250T™ Controls and Features Cont. 5. Channel 1 Bass Control - This control is used to increase (+20dB) or decrease (-30dB) the low fre- quency volume applied to the channel one source signal. Turn the knob counter-clockwise to decrease a value or clockwise to increase a value. 6. Channel One Source Selector Switch - This two position switch is used to select the input source assigned to channel one. Each channel may only be assigned one input source at a time. 7. Cue Selecto
ملخص المحتوى في الصفحة رقم 6
XDM-250T™ Controls and Features Cont. Rear Panel 19 20 21 22 23 24 25 26 24 19. Power Switch - This is the main power ON/OFF button. A yellow LED above the power switch will glow to indicating power is ON. Be fore you turn the power on be sure you have made all connections to the mixer. Also be sure you amplifier are tuned off. Remember mixer on first and turned off last. 20. Power Supply Jack - This connection is used for your detachable AC power cord. Only connect a recommend
ملخص المحتوى في الصفحة رقم 7
XDM-250T™ Typical Mixer Set-Up CASSETTE DECK TURNTABLE TURNTABLE ©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 7
ملخص المحتوى في الصفحة رقم 8
XDM-250T™ Typical Mixer Set-Up RCA to 1/4” Patch Cables Speaker Cables ©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 8
ملخص المحتوى في الصفحة رقم 9
XDM-250T™ Cleaning Due to fog residue, smoke, and dust, cleaning the mixer should be carried out periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Use a cleaner specially designed for electronics to spray in and around the knobs and switch. This will reduce small particle built up that can effect the proper operation of the mixer. 3. Clean should be carried out every 30-60 days. 4. Always be sure to
ملخص المحتوى في الصفحة رقم 10
XDM-250T™ Warranty The XDM-250T™ carries a two year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A.(return authorization) number. If the mixer is under warranty, you must provide a proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on out toll free number. XDM-250T™ Ma
ملخص المحتوى في الصفحة رقم 11
XDM-250T™ Specifications Technical Specifications - Model XDM-250T Model: XDM-250T/Turntable Pro, 2 Channel Mixer POWER SUPPLY: AC 10V, 500mA - 6.3mm Jack DIMENSIONS: 7.55 ” W x 9.3 ” D x 3.22 ” H WEIGHT: 5.2 Lbs./2.3 kg CROSSFADER: Optical detecting fader start control - Low grounding impedance crossfader POWER CONSUMPTION: 5W typical, 7W w/ full headphone output HEADPHONE IMPEDANCE: 16 Ohms ENVIRONMENTAL CONDITION: Operating Temperature 5 to 35 deg. C Hum
ملخص المحتوى في الصفحة رقم 12
©American Audio Supply American Audio World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.americandj.com E-mail: info@americandj.com
