ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
ملخص المحتوى في الصفحة رقم 4
ملخص المحتوى في الصفحة رقم 5
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
ملخص المحتوى في الصفحة رقم 8
Battery Recharge The player had a build-in DC 3.7V, 250mA Lithium battery. Recharging the battery as: Power ON the player by slide the POWER switch to ON position. Connect the player to the computer by the supplied USB connection cable. The display on the unit will shows as below and will start to charging automatically: NOTE: 1) For the first time to recharge the build-in battery, charge it at least 10 hours. For normal recharge, it need approximate 4 hours. 2) When
ملخص المحتوى في الصفحة رقم 9
files transferring, set the player in USB DISK mode as: 1. Power on the player by slide the POWER Switch to ON position, the setting manual (FIG. 1) will appear on the display automatically. FIG.1 FIG.2 2. Press the >>I or I<< button to select SETUP then press MENU button to enter. 3. Press >>I or I<< button to select Online Device (FIG. 2) then press MENU Butt
ملخص المحتوى في الصفحة رقم 10
computer will detected the player and show: 3. Select and turn on the Windows Media Player in the computer and double click the SYNC button on the menu bar. SYNC button 4. Drag the specific DRM songs into the sync list . 5. Double click the Start Sync button on the Windows Media Player to start synchronize the DRM songs into the player. 6. When finished, disconnect the player from the computer. (The operation procedures and the location of control b
ملخص المحتوى في الصفحة رقم 11
2. Only the Window XP and Vista or latest operation system of computer can installed the Windows Media Player 10 or 11. 3. Do NOT disconnect the player during files transferring. Otherwise, the DRM information in the unit may corrupt, you cannot playback the DRM songs again. In this case, you should deleted all the DRM songs and information in the unit as: 3.1 Connect the player to the computer, delete all the files/folders in the player. 3.2 Disconnect the player from the computer. 3.3 P
ملخص المحتوى في الصفحة رقم 12
AMV Converter After the installation of the AMV Converter, click “START” on your computer, click “All Programs”, selected and double click “MP3 Player Utilities 4.16” to enter. Then selected and double click “AMV Converter” to run the converter. The follows window will appear on the computer’s screen: HELP button NOTE: Before using this converter, press the HELP button on the AMV Converter to read the detail Instruction Manual of the Converter. Some video titles have built in p
ملخص المحتوى في الصفحة رقم 13
Locating the Controls S/N Description S/N Description 1 >II Button 6 Button 7 MIC (Microphone) 2 MENU Button 3 8 B utton USB Jack 9 LCD Display 4 VOL Button 10 Power ON/OFF Switch 5 Phones Jack 12
ملخص المحتوى في الصفحة رقم 14
Display Overview S/N Description S/N Description 1 EQ Mode 8 Current Song’s Name 2 Repeat Mode 9 Lyric Indicator 3 Volume Level 10 Bitrate of current Track 4 Battery Meter 11 Total time of current Track 5 Total Numbers of Tracks 12 Elapsed Time of Current Track 6 Current Track Number 13 Format of Current Track 7 Real time Audio Spectrum 14 Current Folder’s Name 13
ملخص المحتوى في الصفحة رقم 15
Battery Indicator = Battery full power. = Battery empty, connect the unit to the computer for recharging. It would take about 4 hours to fully recharge the battery. During charging, you can playback the music, videos or photos at the same time. Basic Operation 1. Power On/Off: 1.1 Power On: ● Slide the Power ON/OFF Switch to ON position to power on the player. 1.2 Power OFF/Standby: ● In power on or playback modes, press and hold the >II Button to power off (Standby mode) the p
ملخص المحتوى في الصفحة رقم 16
Main Menu 1. When power on the player, the setting menu will appear on the display automatically. 2. In the others mode, press and hold the MENU button until the setting menu appear on the display. 3. In the setting menu (or sub-menus), press the >>I or I<< Buttons repeatedly to selected the specific functions, then press the MENU button to confirm the selections. After setting, press and hold the MENU button to return to the main menu or
ملخص المحتوى في الصفحة رقم 17
9.1 If LCD set is selected, press MENU button to enter the setting menu. Press the >>I or I<< button to select Black or Exit. If Black is selected, press MENU button to enter, press the >>I or I<< button to select the display auto turn off period to 0 (Display will not turn off); 6; 12; 18; 24; 30 (seconds), then press and hold the MENU button to save the setting and exit. If Exit is selected, press MENU button to return to the previous setting menu. 9.2 If Language is s
ملخص المحتوى في الصفحة رقم 18
hold the MENU button to save the setting and exit. 9.5 If Memory info. is selected, press MENU button to read the status of internal memory. Press and hold the MENU button to exit. 9.6 If Firmware version is selected, press MENU button to read the information of the software inside the player. Press and hold the MENU button to exit. 9.7 If Exit is selected, press the MENU button to exit. Listening Music 1. When power on the player, the setting menu will appear on the display and the ic
ملخص المحتوى في الصفحة رقم 19
4.3 If Delete all is selected, press MENU button to enter, then press the >>I or I<< button to Select YES or NO. If YES is selected, then press the MENU button to delete all the songs in the player and exit. If NO is selected, press the MENU button to return to pervious menu. 5. To plays all the songs in the player once, press >II button to start. 6. During playback, press >II button to pause, press again to resume normal playback. 7. During playback, press the >>I or I<< button repeatedly
ملخص المحتوى في الصفحة رقم 20
press the MENU button to save the setting and exit. 9.3 If SRS mode is selected, press the >>I or I<< button to select the setting and press the MENU button to save the setting and exit as: SRS WOW: To turn ON the SRS (Surround) effect. User mode: To set the SRS effects as desire. Disable SRS: To turn OFF the SRS effect. 9.4 If Tempo is selected, press the >>I or I<< button to select tempo rate from -8 to +8 then press the MENU button to save the setting and exit. (Note: Te
