ملخص المحتوى في الصفحة رقم 1
PCI MODEM
This Quick Start describes PCI modem installation for
®
computers using Windows 98, Me, 2000, or XP.
Quick Start
Make sure you have the following:
modem telephone cord software CD
free PCI slot in your computer
Important: You must run the setup software before installing the
modem card.
If your computer already has an internal PCI modem
installed
, you should remove the modem and its drivers now.
Your old modem may interfere with the installation of your new
modem. Please refer
ملخص المحتوى في الصفحة رقم 2
Installing the Modem Card Before you start the hardware installation, close all 1 running programs and shut down Windows if you have not already done so. Turn your computer off and unplug it. Don’t plug it back in or turn it on until you complete the modem hardware installation. Take the cover off your computer. 2 On the rear of the computer, unscrew and remove the 3 metal cover plate that lines up with a free PCI slot. (Save the screw.) Do not handle any internal modem card when the phone
ملخص المحتوى في الصفحة رقم 3
Slide the modem card firmly into the free PCI slot. 5 PCI slot Metal cover plate Be sure that the back end of the card (smaller gold finger area) is properly seated into the connector. If you have a tower or mini-tower computer case with a vertical main board, lay the computer down on its side so you can push straight down on the modem card to seat it firmly in its slot. Be sure that the bracket is lined up properly, then screw the bracket into the computer using the screw you removed earlier.
ملخص المحتوى في الصفحة رقم 4
Windows 2000 Users: A few seconds after startup, you may see the Digital Signature Not Found dialog box. Yes You can safely ignore this message and click . Continue below with Completing the Installation. Found New Hardware Windows XP Users: When the Wizard dialog box appears, click Next. You may see a disclaimer box regarding Windows logo testing. You can safely disregard this message and click Continue Anyway Completing the Installation . Continue with . Completing the Installation Open Contr
ملخص المحتوى في الصفحة رقم 5
Important—If Your PC Had an Existing Modem You must redirect your application software so that it recognizes your new modem. America Online Users: From the AOL Welcome screen, click Setup Expert Setup Devices the button; then click . Select the tab and double-click the name of your new modem. Dial-up Networking Users: From your computer’s desktop, double-click My Computer and then Dial-up Networking. Make New Connection Double-click the icon, select your new modem from the dropdown list, and
ملخص المحتوى في الصفحة رقم 6
Start | screen. (If you do not see it, from the desktop go to Programs | NetWaiting, and select NetWaiting to display the icon.) Tip: To avoid the need to reactivate Modem-On-Hold every time Settings | you log on, right-click the NetWaiting icon and select Launch at Windows startup. If someone calls while you are online, the NetWaiting dialog box appears on your computer screen, offering three choices. OK • Click the green icon to place your Internet connection on hold and accept the call. •
ملخص المحتوى في الصفحة رقم 7
In one of the subsequent dialog boxes (depending on your 3 operating system, Modems, or Phone and Modem Options Modem Properties , or ), select the modem you want to uninstall and click Remove. • Take the cover off the computer. 4 • Unplug any cords connected to the card. • Remove the screw that is holding the modem card in place and slide the card out. Regulatory Information Compliance FCC and additional compliance information can be found on the included CD. Electrostatic Discharge Stateme
ملخص المحتوى في الصفحة رقم 8
Declaration of Conformity Declaration of Conformity Déclaration de conformité Konformitätserklärung Δή λω σ η Συμ μ ό ρφω ση ς Dichiarazione di conformità Deklaracja zgodno ści Declaración de conformidade Konformitetsdeklaration Uyum Beyanatı Declaração de Conformidade Brand/Varemærke/Merk/Marque/Marke/ PCI Modem Μά ρκα/Marchio/Marka/Marca/Märke/ Th ương hi ệu Type/Typ/ Μά ρκα/Tipo/Türü/Ki ểu m ẫu Series 1057 The manufacturer declares under sole responsibility that this equipment is compliant to
