ملخص المحتوى في الصفحة رقم 1
56K External Modem
QUICK START
This Quick Start describes external modem installation for
personal computers using Windows 95, 98, Me, 2000, XP,
and NT 4.0. Your modem also works with almost any
computer or terminal with a serial (RS-232) port, including
most Windows 3.x, Macintosh, and Linux computers. You
should consult your full-length manual if you have one of
these other systems. The manual is located on the CD.
Please make sure you have the following items: modem,
telephone cord, power sup
ملخص المحتوى في الصفحة رقم 2
When the main interface appears, click Install Drivers. When the Install Drivers screen appears, select the modem type you are installing. Click Next. Follow the prompts. Click Finish. Leave the CD in the drive, exit any running programs, and shut down your computer. Continue below. Connecting the Faxmodem Make sure your computer is shut down. Locate the 1 faxmodem’s serial number on the bottom of its case, just under the bar code, and make a note of it for future reference. Depending on your m
ملخص المحتوى في الصفحة رقم 3
Connect your telephone (optional). You may also connect 4 your regular telephone to the back of the faxmodem, in the jack labeled PHONE. If your phone cord doesn’t have an RJ-11 plug, you may need an adapter for your cord or an RJ-11 phone cord for your phone. The faxmodem works with or without a telephone connected to it. Connect the power cube. Plug one end of the power cube 5 into the back of the faxmodem. Plug the other end into an electrical outlet. Note: Use only the power cube that came
ملخص المحتوى في الصفحة رقم 4
In the Install New Modem screen, the correct modem will 6 be displayed. Fill in the Location Information screen if it appears. Click Next. At the Modem Properties box, select the newly installed 7 modem and then click Properties. Set the Maximum speed to the highest speed available (probably 115,200). This sets the speed at which the computer communicates with the faxmodem. Note: Do not check Only connect at this speed. Click OK. Click Close. Continue below with Installing the Communications
ملخص المحتوى في الصفحة رقم 5
Windows 2000/XP: 2000: Open Start | Settings | Control Panel. Double-click 1 Phone and Modem Options. Fill in the Location Information screen if it appears. XP: Open Start | Control Panel. Double-click Printers and other Hardware then Phone and Modem Options. Fill in the Location Information screen if it appears. On the Phone and Modem Options screen, click the 2 Modems tab and select your newly installed modem. Click Properties. Set the Maximum speed to the highest speed available (probably
ملخص المحتوى في الصفحة رقم 6
Follow the on-screen instructions and click Finish. 2 Windows NT 4.0 Users: Skip to Step 4. In one of the subsequent dialog boxes (depending on your 3 operating system, Modems, Phone and Modem Options, or Modems Properties), select the modem you want to uninstall and click Remove. Take the cover off the computer. 4 Unplug any cords connected to the card. Remove the screw that is holding the modem card in place and slide the card out. Return to page 1 to continue with the installation. If You
ملخص المحتوى في الصفحة رقم 7
Regulatory Information FCC 47CFR, Part 68 Statement This equipment complies with 47CFR, Part 68 of the rules. The unit bears a label which contains, among other information, the certification number and Ringer Equivalence Number (REN). If requested, this information must be provided to the telephone company. This equipment uses the following standard jack types for network connection: RJ11C. This equipment contains an FCC-compliant modular jack. It is designed to be connected to the telephone ne
ملخص المحتوى في الصفحة رقم 8
on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Industry Canada Emissions Statement This Class B digital apparatus meets all requirements of the Canadian Inter
