ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
MT5600DSVD User Guide Model MT5600DSVD P/N S0000169 Revision B Copyright © 1998–2001 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech
ملخص المحتوى في الصفحة رقم 3
MultiModemDSVD User Guide Contents Chapter 1: Introduction Introduction ............................................................................................................................. 2 Product Description ................................................................................................................ 2 Features .................................................................................................................................... 2 What Is in Your Modem
ملخص المحتوى في الصفحة رقم 4
MultiModemDSVD User Guide Contents Chapter 4: AT Commands, S-Registers & Result Codes AT Commands ...................................................................................................................... 23 AT Command Summary ..................................................................................................... 24 Voice Commands ..................................................................................................................39 S-Registers.............
ملخص المحتوى في الصفحة رقم 5
MultiModemDSVD User Guide Contents Appendix E: Upgrading the Modem Introduction ........................................................................................................................... 71 Upgrade Overview ............................................................................................................... 71 Step 1: Identify the Modem Firmware ............................................................................... 71 Step 2: Identify the Current Firmware Vers
ملخص المحتوى في الصفحة رقم 6
1 Introduction
ملخص المحتوى في الصفحة رقم 7
MultiModemDSVD User Guide 1 Introduction Introduction Congratulations on your purchase of your MultiModemDSVD! You have acquired not only one of the finest intelligent data, fax, and voice modems available, but a modem that can transmit voice and data at the same time. This user guide will help you to install, configure, test, and use your modem. Product Description ™ The MultiModemDSVD modem incorporates both the ITU-T V.90 and the K56flex protocols, both of which enable Internet connections
ملخص المحتوى في الصفحة رقم 8
MultiModemDSVD User Guide 1 Introduction Data TM • Supports the ITU-T V.90 and K56flex standards for data transmission speeds up to 56K bps while maintaining compatibility with lower-speed modems. Note: Under the 56K bps standards, you can asymmetrically download data from an ISP at speeds up to 53K bps, whereas you can upload only at speeds up to 33.6K bps. Supports the enhanced ITU-T V.34 standard, with data transmission speeds to 33.6K bps, while maintaining compatibility with lower-speed
ملخص المحتوى في الصفحة رقم 9
MultiModemDSVD User Guide 1 Introduction What Is in Your Modem Package? Your modem package has several components. Make sure you have them all before trying to operate your modem. Your package should include: One MT5600DSVD modem One DC power supply One set of four plastic feet One modular telephone cable One headset A printed Quick Start Guide This User Guide on disk An installation disk A CD containing data communications and other programs If any of these items are missing
ملخص المحتوى في الصفحة رقم 10
2 Installation
ملخص المحتوى في الصفحة رقم 11
MultiModemDSVD User Guide 2 Installation Introduction This chapter shows step-by-step how to set up your MultiModemDSVD and con- figure your communications software to work with it. What You Will Need Before starting, please make sure you have everything you need: We supply 4 An MT5600DSVD data/fax/voice modem 4 A DC power supply module 4 A set of four plastic feet 4 A modular telephone cable 4 A headset 4 An installation disk 4 A CD containing data communications and other programs 4 A print
ملخص المحتوى في الصفحة رقم 12
MultiModemDSVD User Guide 2 Installation Step 1: Mount the Feet The modem comes with a strip of self-adhesive plastic feet, which you can optional- ly mount on the bottom of the modem. To install the feet, simply peel them from their paper strip and press them into the recesses on the bottom of the modem. Figure 2-1. Mounting the feet. Step 2: Change the Speaker Jumper This step is required only if you intend to connect a monophonic speaker to your modem. (This step is not required for stereo
ملخص المحتوى في الصفحة رقم 13
MultiModemDSVD User Guide 2 Installation J10 Speaker Mode Closed: stereo (default) Open: mono J10 Figure 2-2. Location of speaker jumper. Changing the Speaker Jumper The speaker jumper (J10) is behind the internal speaker near the external speaker jack (see Figure 2-2). To use the MultiModemDSVD with a monophonic external speaker, remove the jumper plug from the J10 jumper pins. You can store it by placing it on one jump- er pin. To use the MultiModemDSVD with a stereo speaker or sound car
ملخص المحتوى في الصفحة رقم 14
MultiModemDSVD User Guide 2 Installation Step 3: Connect the Modem to Your System Placing the modem in a convenient location, connect it to your computer’s serial port, to the telephone line, to AC power, and, optionally, to your telephone. For voice operations, connect it to the supplied headset or, optionally, to a microphone and a speaker or sound card. Note: Do not turn on the modem until you have made all the connections. Figure 2-3. Modem connections. RS232 Connectio
ملخص المحتوى في الصفحة رقم 15
MultiModemDSVD User Guide 2 Installation Note: The Federal Communications Commission (FCC), Industry Canada, and other government agencies may impose certain restrictions on equipment connected to public telephone systems. For more information, see Appendix A. Phone Connection For voice-only calls, you can optionally plug a telephone into the modem’s PHONE jack. Microphone Connection Plug the microphone plug of the supplied headset into the MIC jack on the side of the modem. Optionally, plug a
ملخص المحتوى في الصفحة رقم 16
MultiModemDSVD User Guide 2 Installation Step 4: Install the Modem Driver If you use Windows 95, Windows 98, Windows Me, Windows NT 4.0, or Windows 2000, you must install the modem driver. (If you use Windows 3.1 or another operating system, skip this step and go to Step 5.) The modem driver is used by Windows to con- trol the modem. Installing the Modem Driver 1. Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Insta
ملخص المحتوى في الصفحة رقم 17
MultiModemDSVD User Guide 2 Installation Step 5: Install and Configure Your Software You may use either the communication program included with your modem or a third-party program. Communication programs designed for Windows 95/98/Me and Windows NT/2000 normally do not need to be manually configured, since they use the Plug and Play configuration supplied by the Windows modem driver. Com- munication programs designed for DOS and other operating systems, however, may need to be manually configu
ملخص المحتوى في الصفحة رقم 18
3 Operation
ملخص المحتوى في الصفحة رقم 19
MultiModemDSVD User Guide 3 Operation Introduction Like any modem, your MultiModemDSVD operates only under the control of a communication program, such as the one included with the modem. It also operates under other general-purpose data communication programs, such as Windows Ter- minal and HyperTerminal. For information on how to use the modem with the com- munication program of your choice, please refer to the program’s documentation. Unlike other modems, with the MultiModemDSVD you can al
ملخص المحتوى في الصفحة رقم 20
MultiModemDSVD User Guide 3 Operation Off-Hook. The OH LED lights when the modem is off-hook, which occurs OH when the modem is dialing, online, or answering a call. The LED flashes when the modem pulse-dials. Terminal Ready. The TR LED lights when a datacomm program initializes the TR modem. It means the modem is ready for an outgoing or incoming call. It goes off when the datacomm program disconnects the COM port. When it goes off, a connected modem will disconnect. The state of the TR LED m
