ملخص المحتوى في الصفحة رقم 1
201283-M
Enquiries:
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Ltd. Notice
ملخص المحتوى في الصفحة رقم 4
ملخص المحتوى في الصفحة رقم 5
1
ملخص المحتوى في الصفحة رقم 6
Q : How do I know that I am connected via the DiGi 3G connection? A : Please refer to the signal bar icon at the bottom left of the Connection 1. Indicator Manager window. It indicates whether it is connected to a GPRS, It indicates the status of the E219. EDGE or UMTS/WCDMA/HSDPA network. Colour Status Definition Green Blinking (on for 100ms and The E219 is powered on off for 100ms; then on for 100ms and off for 2700ms) Q : Can I unplug the modem without first removing it from the ope
ملخص المحتوى في الصفحة رقم 7
1. Launch the DiGi Internet Connection Manager. 3. SIM/USIM Card Slot 2. Go to ‘Tools’ > ‘Options’ > ‘Profile Management’ Holds the Subscriber Identity Module/UMTS subscriber identity module (SIM/USIM) card. 3. In the ‘Profile Management’ window, perform the setup as below: • APN: 3gdgnet Preparing the E219 • Dial-up Number: *99# Requirements for the Computer To use the E219, the computer must meet the following requirements: • USB Type A Receptacle, Compatible with USB 2.0 Full Speed • Win
ملخص المحتوى في الصفحة رقم 8
Q : What does the blinking LED on the modem indicate? Connecting the E219 with a PC A : Note: LED First, power on the computer. Then connect the E219 with the computer. Status Definition Indicator Otherwise, the E219 cannot be installed normally. The following figure is the sketch map of the data cable. Blinking (on for 100ms and The modem is powered on Green off for 100ms; then on for 100ms and off for 2700ms) 1 Auxiliary USB data cable 2 Main USB data cable Blinking (on for 100ms and The m
ملخص المحتوى في الصفحة رقم 9
Q : What are the laptop/PC requirements for this modem to function? Launching the Management Program A : The USB modem will operate on both a laptop or desktop PC with the After the E219 is installed, the management program is launched automatically. minimum requirements below: Then every time the E219 is connected to the PC, the management program is launched automatically. • Laptop/PC hardware must meet or exceed the recommended system You can also double-click the shortcut icon on t
ملخص المحتوى في الصفحة رقم 10
Safety Information DiGi Internet Read the safety information carefully to ensure the correct and safe use of your wireless device. Modem FAQ Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device • Do not use your wireless device and follow the rules and regulations set forth by hospitals and healthcare facilities. • Some wireless devices may affect the performance of hearing aids. For an
ملخص المحتوى في الصفحة رقم 11
• Area indicated with the "Explosives" sign 5 Acronyms and Abbreviations • Area indicated with the "Power off bi-direction wireless equipment" sign • Area where you are generally suggested to stop the engine of a vehicle Numeric 3G The Third Generation Traffic Security A APN Access Point Name • Observe local laws and regulations while using the wireless device. To prevent D DNS Domain Name Server accidents, do not use your wireless device while driving. • RF signals may affect electroni
ملخص المحتوى في الصفحة رقم 12
WEEE Approval 4 FAQ The wireless device complies with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC What should I do if I cannot access the Internet? (WEEE Directive). 1. Check the network signal strength. 2. Check whether you have activated the wireless online service. You can ask RoHS Approval the local network operator how to activate it. The wireless device complies with the restriction of the use of certai
ملخص المحتوى في الصفحة رقم 13
• Do not leave your wireless device and accessories in a place with a Note: considerably low or high temperature. For details about setting the profile, contact your service provider. • Use only accessories of the wireless device approved by the manufacturer. Creating a Dial-up Profile Contact the authorised service centre for any abnormality of the wireless device 1. Click New to set the profile name, access number, user name, password, Access or accessories. Point Name (APN) and APN
ملخص المحتوى في الصفحة رقم 14
1. Click the Network Type tab Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits. 2. In the Network Type drop-down combo box, select the corresponding network type 3. In the Band down-drop list box, select the corresponding frequency band Regulatory Information 4. Click Apply The following approvals and notices apply in specific regions as noted. 5. Click OK to save and enable the settings CE Approval (European Union) Selecting a Regis
ملخص المحتوى في الصفحة رقم 15
1. Choose Tools > Choose Device Acronyms and Abbreviations 2. Select a device in the device list • EDGE Enhanced Data Rates for GSM Evolution 3. Click OK to terminate the current terminal and switch to the selected one • GPRS General Packet Radio Service • GSM Global System for Mobile Communications Viewing Diagnostics Information • HSDPA High Speed Downlink Packet Access Choose Tools > Diagnostics to view the diagnostic information of the terminal • OS Operating System device. • PIN Personal I
ملخص المحتوى في الصفحة رقم 16
Entering the PIN Code When the PIN Verification is enabled, you need to enter the correct PIN code to use Software Manual the network-related functions. 1. Choose Tools > PIN Operations > Enter PIN 2. Enter the correct PIN code 3. Click OK to complete the verification Note: If you enter the wrong PIN codes for a preset number of times, the SIM/USIM card is locked and you cannot use it until you enter the PUK code. The Terminal Management prompts you with the remaining number of attempts for e
ملخص المحتوى في الصفحة رقم 17
3 Settings and Information Query PIN Operations If a SIM/USIM card is used on the terminal, the Personal Identity Number (PIN) code protects your card from unauthorised use. You can modify the PIN code and enable/disable the PIN verification. Contents Note: The PIN code and PIN Unblocking Key (PUK) code are provided along with the 1 Description of the Terminal Management GUI........................................... 1 SIM/USIM card. For details, contact your service provider. Launching th
ملخص المحتوى في الصفحة رقم 18
3 Settings and Information Query PIN Operations If a SIM/USIM card is used on the terminal, the Personal Identity Number (PIN) code protects your card from unauthorised use. You can modify the PIN code and enable/disable the PIN verification. Contents Note: The PIN code and PIN Unblocking Key (PUK) code are provided along with the 1 Description of the Terminal Management GUI........................................... 1 SIM/USIM card. For details, contact your service provider. Launching th
ملخص المحتوى في الصفحة رقم 19
Description of the Terminal • Transfer: To view the duration of the current connection, uploaded/downloaded 1 Management GUI speed and data of the current connection. • Statistics: To view the last reset time, daily/monthly/yearly uploaded and Launching the Terminal Management downloaded data. To launch the program, double-click the shortcut icon of the Terminal Management on the desktop. Note: The statistical data of the traffic is only for your reference. The actual traffic Note: info
ملخص المحتوى في الصفحة رقم 20
Status Information The following table lists the status information. 2 Internet Services Status Information Description Accessing the Internet Network signal Indicates the signal strength of the network After setting the network and connection profiles, you can access the network through the Terminal Management. Network information Displays the profile of the current network To access the Internet, do as follows: Network connection The information of the network connection: •
