ملخص المحتوى في الصفحة رقم 1
This product contains drivers that work with the
following operating systems: Windows XP,
DCM-202
Windows 2000, Windows Me, and
D-Link Cable Modem D-Link Cable Modem D-Link Cable Modem D-Link Cable Modem D-Link Cable Modem
Windows 98SE.
Before You Begin
Decide which setup mode (Ethernet NIC or USB) you want to use and follow the
installation process for that setup mode.
Local Cable Network Service
Before installing the cable modem, contact your local cable service provider to
check the availabi
ملخص المحتوى في الصفحة رقم 2
USB Installation Process (optional) Requirements The USB connection can only be used for computers running Microsoft Windows XP, 2000, Me or 98SE RF coaxial cable: • One section of coaxial cable if you are not using a cable line-splitter. • Three sections of coaxial cable if you are using a cable line-splitter. • A cable line-splitter, if you wish to connect the cable modem and a television to the same wall cable outlet (optional). • An active two-way cable line installed by your local cable ope
ملخص المحتوى في الصفحة رقم 3
USB Installation Process (optional) USB Installation Process (optional) Insert the DCM-202 CD-ROM that came with the package. If the D-Link DCM-202 welcome screen appears, click Close to return to the cable modem installation process. Leave the CD in the CD-ROM drive so that Windows can access the software driver files required for the USB adapter. Windows XP: The Found New Hardware Wizard screen appears. Click Finish to finalize the installation. You can now go to “Check the LEDs.” Windows 200
ملخص المحتوى في الصفحة رقم 4
Ethernet Installation Process USB Installation Process (optional) If TCP/IP is NOT listed, you must complete the following steps: Install the USB Software Drivers 1. Click Add. When the computer detects the cable modem, insert the D-Link Installation and 2. Click Protocol, and then click Add. Documentation CD into the computer’s CD-ROM drive and follow the on-screen 3. Click Microsoft in the “Manufacturers” list and then click the prompts to install the necessary driver files. Follow the instruc
ملخص المحتوى في الصفحة رقم 5
Check the LEDs Appendix After installation is complete, the cable modem is operating properly if the P P P P Po o o o ow w w w wer er er er er, Cable Cable Cable Cable Cable, and Status Status Status Status Status LED lights are solid green. Product Specifications Dimensions: 142 x 120 x 30mm 5.6 x 4.7 x 1.2in Net Weight: 345g +/- 10g (0.76lb) LED LABEL COLOR DESCRIPTION DC Input Voltage: 12VDC/1A Power Dissipation (Max): 8 Watts Cable modem is plugged in to an electrical outlet Power Green and
ملخص المحتوى في الصفحة رقم 6
Troubleshooting (continued) Troubleshooting Cable LED is not lit or keeps blinking Orange If the cable modem is not working properly, please follow the procedures below to solve the problem. Possible reason: The cable modem cannot detect any carrier or 1. Check to verify that all equipment is powered “ON” and the cable connections valid data channel from the coaxial cable. are secure. 2. Check the cable modem to see if the LED lights function properly. Action: Make sure the connectors at ea
ملخص المحتوى في الصفحة رقم 7
Technical Support Technical Support Technical Support Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support ove
