ملخص المحتوى في الصفحة رقم 1
TM
Automix 4
Four Channel
Mini Automatic Mixer
User Manual
ملخص المحتوى في الصفحة رقم 2
Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Risk of electrical shock — DO NOT OPEN! CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside.
ملخص المحتوى في الصفحة رقم 3
GENERAL CAUTIONS AND WARNINGS! To prevent electrical shock or potential fire hazards, do not expose the Automix 4 to moisture or rain. Before using this product, read the user manuals for further warnings and cautions. The following cautions should be carefully observed when installing, wiring or using this product: DO NOT use any other power supply or cable other than the one provided with this unit. DO NOT remove the top cover of the unit. There are no user serviceable parts inside. Refer se
ملخص المحتوى في الصفحة رقم 4
Automix 4 User Manual Table Of Contents Thank You! 5 What’s In The Box? 5 5 Description 6 Features 7 Front Panel Features Rear Panel Features 8 9 Installation Connections Channel Input 10 11 Master Outputs 11 Link Bus 12 Channel Inserts Configuration 14, 15 Applications 16 Restaurant 17 Airport Gate Area 18 Courtroom 19 House of Worship 20 Tech Support 20 Warranty Registration 21 Specifications 22 Functional Block Diagram 23 Warranty Statement Page 4 http://aa.peavey.com copyright 2000 All Righ
ملخص المحتوى في الصفحة رقم 5
Welcome Thank you for purchasing the Automix 4 Mini Automatic Mixer. This prod- Thank You! uct is designed to provide years of trouble-free operation, and high quality audio performance. We sincerely hope that you enjoy your new Automix 4, and will find other products in the Peavey Architectural Acoustics product line to supplement your new mixer. We are confident that you will find the Automix 4, as well as other Architectural Acoustics products to be of the highest quality available. This m
ملخص المحتوى في الصفحة رقم 6
Automix 4 User Manual - Patented Priority Control circuitry Features - Single rack space package - Four microphone inputs - LED Clip status indicator on each Channel - 48 volt phantom power on each input (switchable on Channels 1 & 2) - Recessed gain control for each Channel - Channels 1 & 2 each have priority assign control - Channels 1 & 2 each have front panel mute button - Front panel master level meter (three-segment LED) - Line level inserts on each Channel - Insert enable/bypass switch on
ملخص المحتوى في الصفحة رقم 7
Panel Features Front Panel Features (shown with security cover removed) 1 2 3 4 5 6 7 1. PRIORITY CONTROL This control, found only on Channels 1 & 2, adjusts the amount of pri- ority to the Channel, and how it acts on the auto-mix bus. 2. GAIN CONTROL Adjusts the gain of the first preamplifier stage. 3. CLIP/MUTE LED This red LED indicates the clipping conditions of the input Channel’s first gain stage. On Channels 1 & 2, it also indicates if the Channel is muted from the front panel mute switc
ملخص المحتوى في الصفحة رقم 8
Automix 4 User Manual Rear Panel Features 12 11 10 9 8 7 6 5 4 3 2 1 1. MIC IN Balanced microphone level input on removable “Euro” connector. 2. LINE IN Balanced line level input on removable “Euro” connector. Both the mic and line inputs feed the same gain stage, but the line input terminals include a pad to accommodate line level signals. 3. INSERT IN/OUT This is a unbalanced direct out and bus in circuit. The GND connector is common to both the INS. OUT and INS. IN points. The output is a
ملخص المحتوى في الصفحة رقم 9
Installation The Automix 4 is designed to be installed in a standard EIA equipment rack. Installation Since the depth of the unit is only 9-3/8”, you can use practically any size rack. Using only a single EIA rack space, the Automix 4 includes integral rack mounting ears and does not require any additional hardware for rack mounting.......other than the rack screws! All connections for the Automix 4 are made on the rear panel. It is recom- mended that you provide an additional 4 inches of clea
ملخص المحتوى في الصفحة رقم 10
Automix 4 User Manual Connections The inputs to the Automix 4 are balanced. This means that there are three wires for each connection, a positive, negative and shield. These should be connected to each pin accordingly. Also, each input has mic level connections AND line level connec- tions. However, only one set can be used at a time. Both connections feed the same gain stage. NOTE: On Channels 3 & 4, 48VDC phan- tom power is constantly supplied to the microphone inputs. Take care when con-
ملخص المحتوى في الصفحة رقم 11
Connections The master output section features two independent sets of outputs, both from the final gain stage of the Automix 4. Normally, the main outputs that would be used to drive the primary power amplifier would come from the balanced output. The second- ary output, labeled LINE OUT is un-balanced. Both outputs can be used simultaneously. The MIC/LINE switch determines whether the balanced output is nominally at microphone level or line level. For driving power amplifiers, this switch
ملخص المحتوى في الصفحة رقم 12
Automix 4 User Manual Each Channel of the Automix 4 has an insert connection that has several uses for connecting external components. The follow- ing examples and connection diagrams illustrate the most common method of using this powerful feature. For proper automat- ic mixing, the signal gain of the external component MUST be 0 db (unity). NOTE: These connections are unbalanced. Care should be taken when considering the distance, type of wire and type of external connection. This example s
ملخص المحتوى في الصفحة رقم 13
Connections THIS PAGE LEFT INTENTIONALLY BLANK Peavey Electronics Corp Page 13
ملخص المحتوى في الصفحة رقم 14
Automix 4 User Manual Configuration Since the Automix 4 is an analog product, there is not a lot of configuration to worry about. No software, no data cables, no networks and no headaches. However, there are a few things to remember while you begin to use your new Automix 4 mixer. The Automix 4 is shipped from the factory ready to go. You should be able to follow the steps below, and get audio through the unit. The first step is to calibrate your gain settings for the inputs. Each microphone in
ملخص المحتوى في الصفحة رقم 15
Configuration The next step is to configure the Automix 4’s rear panel switches for your application. Although the unit is shipped from the factory with default switch values, you should make sure that these settings are correct for YOUR application. Let’s take a look at each one, and describe their functionality. First, there are the Channels 1-4 Insert Bypass/Enable switch- es. These switches determine the routing of the input Channel’s audio path. In the Bypass position, the signal is no
ملخص المحتوى في الصفحة رقم 16
Automix 4 User Manual Restaurant The Automix 4 works very well in restaurant environments, since the gain management functionality provides an easy way to set up microphones, and not have to worry about levels or feedback. In this example, there are two paging microphones and a background music source. The areas where patrons are waiting for a table require voice paging. However, the paging is annoying to the main seating areas where people are eating. This configuration provides separate feed
ملخص المحتوى في الصفحة رقم 17
Applications Airport Gate Area (Small airport facility) In an airport gate area, the sound system is often a stand-alone system that has feeds from the concourse system as well as the airport-wide system. In the gate area, several levels of priority exist. Mainly, emergency and critical announcements take priority, followed by local gate activity and concourse pages. This system is typically duplicated at each gate in the concourse. In this example, we show how this works easily with the Aut
ملخص المحتوى في الصفحة رقم 18
Automix 4 User Manual Courtroom In this example, we need eight microphones for this courtroom project. Using the Automix 4’s Bus Link feature, we can easily create a larger automatic mixer. The main output feeds the power amplifiers which drive the reinforcement loudspeakers. Prosecution Defense Witness Jury Foreman Slave Bus Link Clerk Portable Court Reporter Judge Judy Master Main Courtroom Gallery System Features - Eight microphone inputs - The Judge, Court Reporter, Witness and Jury Forem
ملخص المحتوى في الصفحة رقم 19
Applications House of Worship Frequently, when designing systems for churches or other houses of worship, the sound system must accommodate multiple methods of operation. This example is typical when a large console is employed, yet the system still requires a simple operation method when a console operator is not available, or needed. When the facility is used for meetings, a small wedding or other application that requires only a few microphones, the Automix 4 can be easily implemented using
ملخص المحتوى في الصفحة رقم 20
Automix 4 User Manual Peavey has an extensive Technical Services Group that provides tech sup- Technical Support port, repair and implementation services. If you require assistance with your new Automix 4, you can get help from several sources. There are many tech- nical documents, white papers and application notes on our website as well as brochures, data sheets and our newsletter, “Audio Interactive”, published monthly. Also on our website are message board forums that include ques- tions a
