ملخص المحتوى في الصفحة رقم 1
INSTRUCTION MANUAL
EM-S1000
Commercial Microwave Oven
Power Source 230V AC, 50Hz
Max. Output Power 1000 Watts
Cavity Size 0.8 cu-ft
Overall Dimensions
(WxDxH) 520mm x 412mm x 296mm
Net Weight Approx. 17 kgs
Read these instructions carefully before use.
If you follow these instructions, your Microwave Oven will serve you long and well.
EUK/ECO
English
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Description Of Oven Parts 2 Installation 3 How To Use Your Microwave Oven Safely 4-5 Care of Your Microwave Oven 5 Oven Control Panel 6 Microwave Oven Cooking Know-How 7 Operating Instructions 7-10 Power Level List 11 Program (2 Stage) Cooking 12-13 Precautions While Heating 14 Usable Cooking Utensils And Materials 14 Checking Accumulative Cooking Time, Number Of Door Operations And Control Of The Buzzer Sound 15 How To Confirm The Frequency Of Each Course Used 16 Care And Cle
ملخص المحتوى في الصفحة رقم 3
INSTALLATION CONNECTING TO THE MAINS Before you use your oven, check that the voltage shown The wire which is coloured green-and-yellow must be on the data label located on the face of the oven con- connected to the terminal in the plug which is marked firms with your mains supply. The mains lead is fitted with the letter E or by the earth symbol or coloured with a non-removable moulded-on 13 amp plug contain- green or green-and-yellow. ing a 13 amp fuse. If the fuse requires replacing
ملخص المحتوى في الصفحة رقم 4
HOW TO USE YOUR MICROWAVE OVEN SAFELY (Important) Although your oven is provided with safety 6. It is important to keep the oven interior clean. Food features, it is important to observe the following: particles left on the oven walls reduce the efficiency of the microwaves. 1. Do not tamper with safety interlocks. 7. Never completely seal containers in the microwave 2. Do not place any object between the oven and the oven. Coverings are necessary but containers must door or allow any food r
ملخص المحتوى في الصفحة رقم 5
HOW TO USE YOUR MICROWAVE OVEN SAFELY (cont.) Although your oven is provided with safety features, it is important to observe the following: a) It is important not to defeat or tamper with safety interlocks. b) Do not place any object between the oven face and the door or allow residue to accumulate on sealing surfaces. Wipe the sealing area frequently with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads. c) When opened, the door must not be subjected to strain, for exam
ملخص المحتوى في الصفحة رقم 6
OVEN CONTROL PANEL 1 3 2 4 5 6 7 DISPLAY: 3. Power Key - For entering the desired power output 1. LED Display - Cooking time, power level, function into the unit memory. indicators are displayed. 4. Timer Key - For entering the desired cooking time into the units memory. KEYS: 5. Memory Key - For entering the desired power output 2. Program Selection Keys - The unit is ready to and cooking time. begin operation as soon as the heating time has 6. Clear Key - For cancelling setting, interrupt
ملخص المحتوى في الصفحة رقم 7
MICROWAVE OVEN COOKING KNOW-HOW 1. Cooking times with quantity 2. Hints for even cooking Input the cooking time that is appropriate to Turn bulky foods over (180 degrees) halfway the quantity of foods being prepared. through the cooking. When heating double or triple quantity, use When cooking two or more items, rotate the appropriate multiple-quantity key. them halfway through the cooking. When cooking foods with parts of different thicknesses, protect the thinner, faster-cooking part with
ملخص المحتوى في الصفحة رقم 8
OPERATING INSTRUCTIONS (2) USING THE PROGRAM KEY FOR MEMORY STORAGE 1. Programmed (1-Stage) Cooking at maximum power. (Example) To program the following on program No. 3: ( Power Level ...max power for 30 seconds.) Operational flow Display Window 1. Touch “Memory” Key (1st time) “0” will appear on the display 2. Touch “Memory” key (2nd time) No change 3. No change Touch PROGRAM key number “3” 4. The bar under Stage 1 and Touch “Time” key lower colon will appear on the display. 5. Input the o
ملخص المحتوى في الصفحة رقم 9
OPERATING INSTRUCTIONS (3) USING THE PROGRAM KEY FOR MEMORY STORAGE 1. Programmed (1-Stage) Cooking at lower power level. (Example) To program the following on program No. 4: ( Power Level 5 for 45 seconds.) Operational flow Display Window 1. “0” will appear on the display Touch “Memory” Key (1st time) 2. Touch “Memory” key (2nd time) No change 3. No change Touch PROGRAM key number “4” 4. The bar under Stage 1 and “ PL Touch “Power” Key 10” will appear on the display. Input “power level 5” w
ملخص المحتوى في الصفحة رقم 10
OPERATING INSTRUCTIONS (4) HEATING METHOD 1. Ordinary Use (Example) When program No. 3 is programmed as: First stage ( Max power for 30 seconds.) and Second stage (Power Level 2 for 1 min.) Operational flow Display Window 1. Place food in oven “0” will appear on the display Touch PROGRAM key Stage 1 bar blinks. Stage 2 bar & 2. number “3” (Heating Starts). lower colon lights. Heating time “30” will show and count down. After 1st stage is completed, Stage 2 bar binks. Heating time “1.00” will
ملخص المحتوى في الصفحة رقم 11
POWER LEVEL LIST POWER LEVEL POWER (W) Max. Input time (Input figure) EM-S1000 Manual Set One Touch Course max power (no input) 1000 10 min. 00 sec. 6 min. 00 sec. 9 900 “ “ 8 800 “ “ 7 700 “ “ 6 600 “ “ 5 500 30 min. 00 sec. 30 min. 00 sec 4 400 “ “ 3 300 “ “ 2 200 “ “ 1 100 “ “ 0 0 “ “ NOTE: 1. A “beep” tone sounds whenever any key is touched. 2. If the desired numeral is not displayed, touch “Clear” and restart (procedures) from the beginning. 3. If an operating time over the Max, input time
ملخص المحتوى في الصفحة رقم 12
PROGRAM (2-STAGE) COOKING 1. Programmed (2 Stage) Cooking (Example) To program the following on program No. 3: First stage (Max power for 30 seconds.) Second stage (Power Level 2 for 10 minutes.) Operating flow 1-6 of 1-stage cooking, then: (see page 8) Operational flow Display Window 7. Stage 2 bar lights and “PL10” will Touch “Power” Key appear in the display. Input POWER level 2 with the 8. “PL 2” will appear in the display. PROGRAM keys Touch : number “2” 9. Lower colon lights and “0” wil
ملخص المحتوى في الصفحة رقم 13
PROGRAM (2-STAGE) COOKING (cont.) 2. Confirmation of Memory (Example) When program No.3 is programmed as: First stage (Max power for 30 seconds.) Second stage (Power Level 2 for 10 minutes.) Operational flow Display Window 1. Open door “0” will appear on the display Touch number “3” 2. Stage 1 bar lights. Programmed No. 3 Input Time 30 sec. (“ .30”) will appear on the display. After 2 sec., Input Power Level “PL 10” will appear for 2 sec. and then return to input time. Stage 2 bar lights. Pro
ملخص المحتوى في الصفحة رقم 14
PRECAUTIONS WHILE HEATING 1. Checking foods during cooking 5. Cooking time for triple quantity When it is necessary to open the door while The cooking time for triple quantity is 2.3 times the food is cooking, the cooking program is auto- cooking time for one quantity. matically suspended, the display remains lit and remaining time is displayed. 6. Limitations on multiple-quantity cooking When more than “Power Level 6” is being used, 2. Resuming cooking after checking the maximum heating time
ملخص المحتوى في الصفحة رقم 15
CHECKING ACCUMULATIVE COOKING TIME, NUMBER OF DOOR OPERATIONS AND CONTROL OF THE BUZZER SOUND (DOOR MUST BE CLOSED) Display shows accumulative cooking time or the number of door operations by key operation. Also, you can change any remaining cooking time, buzzer sound or buzzer volume. Operational flow Display Window 1. “0” will appear on the display Touch “Clear” key 2. Touch “Time” key Stage 1 bar & lower colon lights. 3. The “8.88” will appear on the Touch number display. “8” three times
ملخص المحتوى في الصفحة رقم 16
HOW TO CONFIRM THE FREQUENCY OF EACH COURSE USED Operational flow Display Window 1. “0” will appear on the display. Touch “Clear” Key 2. Touch “Time” key Stage 1 bar & lower colon lights. 3. The “99.99” will appear on the Touch number display. “9” four times 4. Touch “Start” key The “99.99” will start flashing. Display shows number of times Touch “Start” key again 5. course 1 has been used, ie 428 times used. 6. Display shows number of times Touch “Start” key again course 2 has been used
ملخص المحتوى في الصفحة رقم 17
CARE AND CLEANING Wipe any spills and splashes inside and outside the oven with a mild detergent solution, rinse, and wipe dry. Do not use the alkaline detergent. Any food left in the oven could possibly cause arcing due to carbonisation.Never use abra- sive powders or pads. WHAT TO DO IF REPAIRS ARE NEEDED 1. Get in contact with your nearest SANYO SERVICE • If the interior lamp does not light when the oven CENTER. It is dangerous for anyone other than a timer is set: properly qual
ملخص المحتوى في الصفحة رقم 18
03-03 SANYO Electric Co., Ltd. CODE NO. MO- P xxxx Printed in Thailand 18
