Baldor MN781-SUP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Baldor Electric Company, P. O. Box 2400, Ft. Smith, AR 72902-2400, (479) 646-4711, Fax (479) 648-5792
6HULHV0LFUR,QYHUWHU6XSSOHPHQWDO,QIRUPDWLRQ
IMPORTANT: The following information and instructions are to be used as a supplement to the Installation and Operation
Manual (Part No. MN781) until the new manual is available with the addition of Model ID5602-CO. The manual must be read
and understood before attempting to operate this control.
Table 1 - Electrical Ratings
Maximum
Nominal Maximum

ملخص المحتوى في الصفحة رقم 2

Baldor Electric Company, P. O. Box 2400, Ft. Smith, AR 72902-2400, (479) 646-4711, Fax (479) 648-5792 6HULHV0LFUR,QYHUWHU6XSSOHPHQWDO,QIRUPDWLRQ Figure 2A Control Set for 230 Volts AC Line Input Figure 2B (Factory Setting) Control Set for 115 Volts AC Line Input (Jumper J1 in the "230V" Position) (Jumper J1 in the "115V" Position) 1-2. Motor Frequency Selection (Jumpers J1 and J2, on the Lower PC Board): The controls are factory set to operate 60 Hz motors (Jumper J1 factory set to the "6